Octa Automatique Réserve
Octa Automatique Réserve Havana
OCTA Automatique Lune
OCTA Automatique Lune Havana
Octa Réserve de Marche
OCTA Lune
Octa Divine
OCTA UTC
Octa Chronographe
Octa Calendrier
OCTA Collection

OCTA Automatique Lune Calibre 1300.3 FP Journe FP Journe

Platinum case
Diameter: 38 or 40 mm
Overall height: 10.6 mm
Dial: whitened guilloché Silver
Hands: blued Steel
Calibre 1300.3

Technical Specifications

Indications :

    Centre hours and minutes
    Small seconds at 4:30
    Large date
    Power-reserve indicator at 9h00
    Moon phase

Dimensions :
  • Overall diameter : 34.60 mm
  • Casing-up diameter : 30.40 mm
  • Overall height : 5.80 mm
  • Height of winding stem : 3.10 mm
  • Diameter of stem thread : S0.90 mm
  • Case Diameter : 40.00 mm
  • Overall Thickness : 10.6 mm
Characteristics :

    In-line lever escapement, 15-tooth wheel
    Balance with 4 inertia weights
    Flat Anachron microflamed spring
    Mobile stud holder
    Free-sprung balance
    Virolage laser Nivatronic
    Pinned GE stud
    Three-position crown Slipping mainspring
    Off-centre winding rotor

WINDING SPEED :

    on rotator:
    274 clockwise revolutions/24 hours (without mainspring slipping)

Characteristics :

    Uni-directional automatic winding
    Date setting by turning crown in opposite ways (position 2)
    Time setting with crown in position 3
    Instantaneous date change

FREQUENCY :

    21'600 Alt/h, (3Hz)

Balance :

    Inertia: 10.10 mg*cm2
    Angle of lift: 52°

Amplitude :

    12 h dial up : 280°
    90 h dial up : 220°

Autonomy :

    160 ± 10 hours

Number of jewels :

    36

Finish :

    High grade
    Circular stripes on the bridges
    Baseplate partly circular grained
    Polished screw heads with chamfered slots
    Pegs with polished rounded ends
    Steelwork with polished chamfers

Number of parts :

    Movement 271
    Cased up with strap 295

Indications :

    Centre hours and minutes
    Small seconds at 4:30
    Large date
    Power-reserve indicator at 9h00
    Moon phase

Dimensions :
  • Overall diameter : 34.60 mm
  • Casing-up diameter : 30.40 mm
  • Overall height : 5.80 mm
  • Height of winding stem : 3.10 mm
  • Diameter of stem thread : S0.90 mm
  • Case Diameter : 40.00 mm
  • Overall Thickness : 10.6 mm
Characteristics :

    In-line lever escapement, 15-tooth wheel
    Balance with 4 inertia weights
    Flat Anachron microflamed spring
    Mobile stud holder
    Free-sprung balance
    Virolage laser Nivatronic
    Pinned GE stud
    Three-position crown Slipping mainspring
    Off-centre winding rotor

WINDING SPEED :

    on rotator:
    274 clockwise revolutions/24 hours (without mainspring slipping)

Characteristics :

    Uni-directional automatic winding
    Date setting by turning crown in opposite ways (position 2)
    Time setting with crown in position 3
    Instantaneous date change

FREQUENCY :

    21'600 Alt/h, (3Hz)

Balance :

    Inertia: 10.10 mg*cm2
    Angle of lift: 52°

Amplitude :

    12 h dial up : 280°
    90 h dial up : 220°

Autonomy :

    160 ± 10 hours

Number of jewels :

    36

Finish :

    High grade
    Circular stripes on the bridges
    Baseplate partly circular grained
    Polished screw heads with chamfered slots
    Pegs with polished rounded ends
    Steelwork with polished chamfers

Number of parts :

    Movement 271
    Cased up with strap 295


At the heart of the movement
At the heart of the movement
Brevet - EP 1 760 544 A1
fpjourne

Technical description


(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance

Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.

Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
Brevet - EP 1 760 544 A1
fpjourne

Technical description


(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance

Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.

Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
18K 6N Gold case
Diameter: 38 or 40 mm
Overall height: 10.6 mm
Dial: whitened guilloché Silver
Hands: blued Steel
Calibre 1300.3

Technical Specifications

Indications :

    Centre hours and minutes
    Small seconds at 4:30
    Large date
    Power-reserve indicator at 9h00
    Moon phase

Dimensions :
  • Overall diameter : 34.60 mm
  • Casing-up diameter : 30.40 mm
  • Overall height : 5.80 mm
  • Height of winding stem : 3.10 mm
  • Diameter of stem thread : S0.90 mm
  • Case Diameter : 40.00 mm
  • Overall Thickness : 10.6 mm
Characteristics :

    In-line lever escapement, 15-tooth wheel
    Balance with 4 inertia weights
    Flat Anachron microflamed spring
    Mobile stud holder
    Free-sprung balance
    Virolage laser Nivatronic
    Pinned GE stud
    Three-position crown Slipping mainspring
    Off-centre winding rotor

WINDING SPEED :

    on rotator:
    274 clockwise revolutions/24 hours (without mainspring slipping)

Characteristics :

    Uni-directional automatic winding
    Date setting by turning crown in opposite ways (position 2)
    Time setting with crown in position 3
    Instantaneous date change

FREQUENCY :

    21'600 Alt/h, (3Hz)

Balance :

    Inertia: 10.10 mg*cm2
    Angle of lift: 52°

Amplitude :

    12 h dial up : 280°
    90 h dial up : 220°

Autonomy :

    160 ± 10 hours

Number of jewels :

    36

Finish :

    High grade
    Circular stripes on the bridges
    Baseplate partly circular grained
    Polished screw heads with chamfered slots
    Pegs with polished rounded ends
    Steelwork with polished chamfers

Number of parts :

    Movement 271
    Cased up with strap 295

Indications :

    Centre hours and minutes
    Small seconds at 4:30
    Large date
    Power-reserve indicator at 9h00
    Moon phase

Dimensions :
  • Overall diameter : 34.60 mm
  • Casing-up diameter : 30.40 mm
  • Overall height : 5.80 mm
  • Height of winding stem : 3.10 mm
  • Diameter of stem thread : S0.90 mm
  • Case Diameter : 40.00 mm
  • Overall Thickness : 10.6 mm
Characteristics :

    In-line lever escapement, 15-tooth wheel
    Balance with 4 inertia weights
    Flat Anachron microflamed spring
    Mobile stud holder
    Free-sprung balance
    Virolage laser Nivatronic
    Pinned GE stud
    Three-position crown Slipping mainspring
    Off-centre winding rotor

WINDING SPEED :

    on rotator:
    274 clockwise revolutions/24 hours (without mainspring slipping)

Characteristics :

    Uni-directional automatic winding
    Date setting by turning crown in opposite ways (position 2)
    Time setting with crown in position 3
    Instantaneous date change

FREQUENCY :

    21'600 Alt/h, (3Hz)

Balance :

    Inertia: 10.10 mg*cm2
    Angle of lift: 52°

Amplitude :

    12 h dial up : 280°
    90 h dial up : 220°

Autonomy :

    160 ± 10 hours

Number of jewels :

    36

Finish :

    High grade
    Circular stripes on the bridges
    Baseplate partly circular grained
    Polished screw heads with chamfered slots
    Pegs with polished rounded ends
    Steelwork with polished chamfers

Number of parts :

    Movement 271
    Cased up with strap 295


At the heart of the movement
At the heart of the movement
Brevet - EP 1 760 544 A1
fpjourne

Technical description


(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance

Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.

Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
Brevet - EP 1 760 544 A1
fpjourne

Technical description


(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance

Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.

Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
Platinum case and bracelet
Diameter: 38 or 40 mm
Overall height: 10.6 mm
Dial: whitened guilloché Silver
Hands: blued Steel
Calibre 1300.3

Technical Specifications

Indications :

    Centre hours and minutes
    Small seconds at 4:30
    Large date
    Power-reserve indicator at 9h00
    Moon phase

Dimensions :
  • Overall diameter : 34.60 mm
  • Casing-up diameter : 30.40 mm
  • Overall height : 5.80 mm
  • Height of winding stem : 3.10 mm
  • Diameter of stem thread : S0.90 mm
  • Case Diameter : 40.00 mm
  • Overall Thickness : 10.6 mm
Characteristics :

    In-line lever escapement, 15-tooth wheel
    Balance with 4 inertia weights
    Flat Anachron microflamed spring
    Mobile stud holder
    Free-sprung balance
    Virolage laser Nivatronic
    Pinned GE stud
    Three-position crown Slipping mainspring
    Off-centre winding rotor

WINDING SPEED :

    on rotator:
    274 clockwise revolutions/24 hours (without mainspring slipping)

Characteristics :

    Uni-directional automatic winding
    Date setting by turning crown in opposite ways (position 2)
    Time setting with crown in position 3
    Instantaneous date change

FREQUENCY :

    21'600 Alt/h, (3Hz)

Balance :

    Inertia: 10.10 mg*cm2
    Angle of lift: 52°

Amplitude :

    12 h dial up : 280°
    90 h dial up : 220°

Autonomy :

    160 ± 10 hours

Number of jewels :

    36

Finish :

    High grade
    Circular stripes on the bridges
    Baseplate partly circular grained
    Polished screw heads with chamfered slots
    Pegs with polished rounded ends
    Steelwork with polished chamfers

Number of parts :

    Movement 271
    Cased up with strap 295

Indications :

    Centre hours and minutes
    Small seconds at 4:30
    Large date
    Power-reserve indicator at 9h00
    Moon phase

Dimensions :
  • Overall diameter : 34.60 mm
  • Casing-up diameter : 30.40 mm
  • Overall height : 5.80 mm
  • Height of winding stem : 3.10 mm
  • Diameter of stem thread : S0.90 mm
  • Case Diameter : 40.00 mm
  • Overall Thickness : 10.6 mm
Characteristics :

    In-line lever escapement, 15-tooth wheel
    Balance with 4 inertia weights
    Flat Anachron microflamed spring
    Mobile stud holder
    Free-sprung balance
    Virolage laser Nivatronic
    Pinned GE stud
    Three-position crown Slipping mainspring
    Off-centre winding rotor

WINDING SPEED :

    on rotator:
    274 clockwise revolutions/24 hours (without mainspring slipping)

Characteristics :

    Uni-directional automatic winding
    Date setting by turning crown in opposite ways (position 2)
    Time setting with crown in position 3
    Instantaneous date change

FREQUENCY :

    21'600 Alt/h, (3Hz)

Balance :

    Inertia: 10.10 mg*cm2
    Angle of lift: 52°

Amplitude :

    12 h dial up : 280°
    90 h dial up : 220°

Autonomy :

    160 ± 10 hours

Number of jewels :

    36

Finish :

    High grade
    Circular stripes on the bridges
    Baseplate partly circular grained
    Polished screw heads with chamfered slots
    Pegs with polished rounded ends
    Steelwork with polished chamfers

Number of parts :

    Movement 271
    Cased up with strap 295


At the heart of the movement
At the heart of the movement
Brevet - EP 1 760 544 A1
fpjourne

Technical description


(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance

Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.

Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
Brevet - EP 1 760 544 A1
fpjourne

Technical description


(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance

Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.

Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
18K 6N Gold case and bracelet
Diameter: 38 or 40 mm
Overall height: 10.6 mm
Dial: whitened guilloché Silver
Hands: blued Steel
Calibre 1300.3

Technical Specifications

Indications :

    Centre hours and minutes
    Small seconds at 4:30
    Large date
    Power-reserve indicator at 9h00
    Moon phase

Dimensions :
  • Overall diameter : 34.60 mm
  • Casing-up diameter : 30.40 mm
  • Overall height : 5.80 mm
  • Height of winding stem : 3.10 mm
  • Diameter of stem thread : S0.90 mm
  • Case Diameter : 40.00 mm
  • Overall Thickness : 10.6 mm
Characteristics :

    In-line lever escapement, 15-tooth wheel
    Balance with 4 inertia weights
    Flat Anachron microflamed spring
    Mobile stud holder
    Free-sprung balance
    Virolage laser Nivatronic
    Pinned GE stud
    Three-position crown Slipping mainspring
    Off-centre winding rotor

WINDING SPEED :

    on rotator:
    274 clockwise revolutions/24 hours (without mainspring slipping)

Characteristics :

    Uni-directional automatic winding
    Date setting by turning crown in opposite ways (position 2)
    Time setting with crown in position 3
    Instantaneous date change

FREQUENCY :

    21'600 Alt/h, (3Hz)

Balance :

    Inertia: 10.10 mg*cm2
    Angle of lift: 52°

Amplitude :

    12 h dial up : 280°
    90 h dial up : 220°

Autonomy :

    160 ± 10 hours

Number of jewels :

    36

Finish :

    High grade
    Circular stripes on the bridges
    Baseplate partly circular grained
    Polished screw heads with chamfered slots
    Pegs with polished rounded ends
    Steelwork with polished chamfers

Number of parts :

    Movement 271
    Cased up with strap 295

Indications :

    Centre hours and minutes
    Small seconds at 4:30
    Large date
    Power-reserve indicator at 9h00
    Moon phase

Dimensions :
  • Overall diameter : 34.60 mm
  • Casing-up diameter : 30.40 mm
  • Overall height : 5.80 mm
  • Height of winding stem : 3.10 mm
  • Diameter of stem thread : S0.90 mm
  • Case Diameter : 40.00 mm
  • Overall Thickness : 10.6 mm
Characteristics :

    In-line lever escapement, 15-tooth wheel
    Balance with 4 inertia weights
    Flat Anachron microflamed spring
    Mobile stud holder
    Free-sprung balance
    Virolage laser Nivatronic
    Pinned GE stud
    Three-position crown Slipping mainspring
    Off-centre winding rotor

WINDING SPEED :

    on rotator:
    274 clockwise revolutions/24 hours (without mainspring slipping)

Characteristics :

    Uni-directional automatic winding
    Date setting by turning crown in opposite ways (position 2)
    Time setting with crown in position 3
    Instantaneous date change

FREQUENCY :

    21'600 Alt/h, (3Hz)

Balance :

    Inertia: 10.10 mg*cm2
    Angle of lift: 52°

Amplitude :

    12 h dial up : 280°
    90 h dial up : 220°

Autonomy :

    160 ± 10 hours

Number of jewels :

    36

Finish :

    High grade
    Circular stripes on the bridges
    Baseplate partly circular grained
    Polished screw heads with chamfered slots
    Pegs with polished rounded ends
    Steelwork with polished chamfers

Number of parts :

    Movement 271
    Cased up with strap 295


At the heart of the movement
At the heart of the movement
Brevet - EP 1 760 544 A1
fpjourne

Technical description


(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance

Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.

Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
Brevet - EP 1 760 544 A1
fpjourne

Technical description


(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance

Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.

Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
Platinum case
Diameter: 40 mm
Overall height: 10.6 mm
Dial: white Gold, Gold numerals surfaced with a diamond tool
Hands: rhodium plated Steel
Calibre 1300.3

Technical Specifications

Indications :

    Centre hours and minutes
    Small seconds at 4:30
    Large date
    Power-reserve indicator at 9h00
    Moon phase

Dimensions :
  • Overall diameter : 34.60 mm
  • Casing-up diameter : 30.40 mm
  • Overall height : 5.80 mm
  • Height of winding stem : 3.10 mm
  • Diameter of stem thread : S0.90 mm
  • Case Diameter : 40.00 mm
  • Overall Thickness : 10.6 mm
Characteristics :

    In-line lever escapement, 15-tooth wheel
    Balance with 4 inertia weights
    Flat Anachron microflamed spring
    Mobile stud holder
    Free-sprung balance
    Virolage laser Nivatronic
    Pinned GE stud
    Three-position crown Slipping mainspring
    Off-centre winding rotor

WINDING SPEED :

    on rotator:
    274 clockwise revolutions/24 hours (without mainspring slipping)

Characteristics :

    Uni-directional automatic winding
    Date setting by turning crown in opposite ways (position 2)
    Time setting with crown in position 3
    Instantaneous date change

FREQUENCY :

    21'600 Alt/h, (3Hz)

Balance :

    Inertia: 10.10 mg*cm2
    Angle of lift: 52°

Amplitude :

    12 h dial up : 280°
    90 h dial up : 220°

Autonomy :

    160 ± 10 hours

Number of jewels :

    36

Finish :

    High grade
    Circular stripes on the bridges
    Baseplate partly circular grained
    Polished screw heads with chamfered slots
    Pegs with polished rounded ends
    Steelwork with polished chamfers

Number of parts :

    Movement 271
    Cased up with strap 295

Indications :

    Centre hours and minutes
    Small seconds at 4:30
    Large date
    Power-reserve indicator at 9h00
    Moon phase

Dimensions :
  • Overall diameter : 34.60 mm
  • Casing-up diameter : 30.40 mm
  • Overall height : 5.80 mm
  • Height of winding stem : 3.10 mm
  • Diameter of stem thread : S0.90 mm
  • Case Diameter : 40.00 mm
  • Overall Thickness : 10.6 mm
Characteristics :

    In-line lever escapement, 15-tooth wheel
    Balance with 4 inertia weights
    Flat Anachron microflamed spring
    Mobile stud holder
    Free-sprung balance
    Virolage laser Nivatronic
    Pinned GE stud
    Three-position crown Slipping mainspring
    Off-centre winding rotor

WINDING SPEED :

    on rotator:
    274 clockwise revolutions/24 hours (without mainspring slipping)

Characteristics :

    Uni-directional automatic winding
    Date setting by turning crown in opposite ways (position 2)
    Time setting with crown in position 3
    Instantaneous date change

FREQUENCY :

    21'600 Alt/h, (3Hz)

Balance :

    Inertia: 10.10 mg*cm2
    Angle of lift: 52°

Amplitude :

    12 h dial up : 280°
    90 h dial up : 220°

Autonomy :

    160 ± 10 hours

Number of jewels :

    36

Finish :

    High grade
    Circular stripes on the bridges
    Baseplate partly circular grained
    Polished screw heads with chamfered slots
    Pegs with polished rounded ends
    Steelwork with polished chamfers

Number of parts :

    Movement 271
    Cased up with strap 295


At the heart of the movement
At the heart of the movement
Brevet - EP 1 760 544 A1
fpjourne

Technical description


(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance

Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.

Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
Brevet - EP 1 760 544 A1
fpjourne

Technical description


(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance

Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.

Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
18K 6N Gold case
Diameter: 40 mm
Overall height: 10.6 mm
Dial: white Gold, Gold numerals surfaced with a diamond tool
Hands: 5N gilt Steel
Calibre 1300.3

Technical Specifications

Indications :

    Centre hours and minutes
    Small seconds at 4:30
    Large date
    Power-reserve indicator at 9h00
    Moon phase

Dimensions :
  • Overall diameter : 34.60 mm
  • Casing-up diameter : 30.40 mm
  • Overall height : 5.80 mm
  • Height of winding stem : 3.10 mm
  • Diameter of stem thread : S0.90 mm
  • Case Diameter : 40.00 mm
  • Overall Thickness : 10.6 mm
Characteristics :

    In-line lever escapement, 15-tooth wheel
    Balance with 4 inertia weights
    Flat Anachron microflamed spring
    Mobile stud holder
    Free-sprung balance
    Virolage laser Nivatronic
    Pinned GE stud
    Three-position crown Slipping mainspring
    Off-centre winding rotor

WINDING SPEED :

    on rotator:
    274 clockwise revolutions/24 hours (without mainspring slipping)

Characteristics :

    Uni-directional automatic winding
    Date setting by turning crown in opposite ways (position 2)
    Time setting with crown in position 3
    Instantaneous date change

FREQUENCY :

    21'600 Alt/h, (3Hz)

Balance :

    Inertia: 10.10 mg*cm2
    Angle of lift: 52°

Amplitude :

    12 h dial up : 280°
    90 h dial up : 220°

Autonomy :

    160 ± 10 hours

Number of jewels :

    36

Finish :

    High grade
    Circular stripes on the bridges
    Baseplate partly circular grained
    Polished screw heads with chamfered slots
    Pegs with polished rounded ends
    Steelwork with polished chamfers

Number of parts :

    Movement 271
    Cased up with strap 295

Indications :

    Centre hours and minutes
    Small seconds at 4:30
    Large date
    Power-reserve indicator at 9h00
    Moon phase

Dimensions :
  • Overall diameter : 34.60 mm
  • Casing-up diameter : 30.40 mm
  • Overall height : 5.80 mm
  • Height of winding stem : 3.10 mm
  • Diameter of stem thread : S0.90 mm
  • Case Diameter : 40.00 mm
  • Overall Thickness : 10.6 mm
Characteristics :

    In-line lever escapement, 15-tooth wheel
    Balance with 4 inertia weights
    Flat Anachron microflamed spring
    Mobile stud holder
    Free-sprung balance
    Virolage laser Nivatronic
    Pinned GE stud
    Three-position crown Slipping mainspring
    Off-centre winding rotor

WINDING SPEED :

    on rotator:
    274 clockwise revolutions/24 hours (without mainspring slipping)

Characteristics :

    Uni-directional automatic winding
    Date setting by turning crown in opposite ways (position 2)
    Time setting with crown in position 3
    Instantaneous date change

FREQUENCY :

    21'600 Alt/h, (3Hz)

Balance :

    Inertia: 10.10 mg*cm2
    Angle of lift: 52°

Amplitude :

    12 h dial up : 280°
    90 h dial up : 220°

Autonomy :

    160 ± 10 hours

Number of jewels :

    36

Finish :

    High grade
    Circular stripes on the bridges
    Baseplate partly circular grained
    Polished screw heads with chamfered slots
    Pegs with polished rounded ends
    Steelwork with polished chamfers

Number of parts :

    Movement 271
    Cased up with strap 295


At the heart of the movement
At the heart of the movement
Brevet - EP 1 760 544 A1
fpjourne

Technical description


(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance

Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.

Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
Brevet - EP 1 760 544 A1
fpjourne

Technical description


(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance

Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.

Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
Platinum case
Diameter: 38 or 40 mm
Overall height: 10.6 mm
Dial: whitened guilloché Silver
Hands: blued Steel
Finishing
Platinum case
Diameter: 38 or 40 mm
Overall height: 10.6 mm
Dial: whitened guilloché Silver
Hands: blued Steel
Calibre 1300.3

Technical Specifications

Indications :

    Centre hours and minutes
    Small seconds at 4:30
    Large date
    Power-reserve indicator at 9h00
    Moon phase

Dimensions :
  • Overall diameter : 34.60 mm
  • Casing-up diameter : 30.40 mm
  • Overall height : 5.80 mm
  • Height of winding stem : 3.10 mm
  • Diameter of stem thread : S0.90 mm
  • Case Diameter : 40.00 mm
  • Overall Thickness : 10.6 mm
Characteristics :

    In-line lever escapement, 15-tooth wheel
    Balance with 4 inertia weights
    Flat Anachron microflamed spring
    Mobile stud holder
    Free-sprung balance
    Virolage laser Nivatronic
    Pinned GE stud
    Three-position crown Slipping mainspring
    Off-centre winding rotor

WINDING SPEED :

    on rotator:
    274 clockwise revolutions/24 hours (without mainspring slipping)

Characteristics :

    Uni-directional automatic winding
    Date setting by turning crown in opposite ways (position 2)
    Time setting with crown in position 3
    Instantaneous date change

FREQUENCY :

    21'600 Alt/h, (3Hz)

Balance :

    Inertia: 10.10 mg*cm2
    Angle of lift: 52°

Amplitude :

    12 h dial up : 280°
    90 h dial up : 220°

Autonomy :

    160 ± 10 hours

Number of jewels :

    36

Finish :

    High grade
    Circular stripes on the bridges
    Baseplate partly circular grained
    Polished screw heads with chamfered slots
    Pegs with polished rounded ends
    Steelwork with polished chamfers

Number of parts :

    Movement 271
    Cased up with strap 295

Indications :

    Centre hours and minutes
    Small seconds at 4:30
    Large date
    Power-reserve indicator at 9h00
    Moon phase

Dimensions :
  • Overall diameter : 34.60 mm
  • Casing-up diameter : 30.40 mm
  • Overall height : 5.80 mm
  • Height of winding stem : 3.10 mm
  • Diameter of stem thread : S0.90 mm
  • Case Diameter : 40.00 mm
  • Overall Thickness : 10.6 mm
Characteristics :

    In-line lever escapement, 15-tooth wheel
    Balance with 4 inertia weights
    Flat Anachron microflamed spring
    Mobile stud holder
    Free-sprung balance
    Virolage laser Nivatronic
    Pinned GE stud
    Three-position crown Slipping mainspring
    Off-centre winding rotor

WINDING SPEED :

    on rotator:
    274 clockwise revolutions/24 hours (without mainspring slipping)

Characteristics :

    Uni-directional automatic winding
    Date setting by turning crown in opposite ways (position 2)
    Time setting with crown in position 3
    Instantaneous date change

FREQUENCY :

    21'600 Alt/h, (3Hz)

Balance :

    Inertia: 10.10 mg*cm2
    Angle of lift: 52°

Amplitude :

    12 h dial up : 280°
    90 h dial up : 220°

Autonomy :

    160 ± 10 hours

Number of jewels :

    36

Finish :

    High grade
    Circular stripes on the bridges
    Baseplate partly circular grained
    Polished screw heads with chamfered slots
    Pegs with polished rounded ends
    Steelwork with polished chamfers

Number of parts :

    Movement 271
    Cased up with strap 295


At the heart of the movement
At the heart of the movement
Brevet - EP 1 760 544 A1
fpjourne

Technical description


(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance

Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.

Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
Brevet - EP 1 760 544 A1
fpjourne

Technical description


(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance

Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.

Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
18K 6N Gold case
Diameter: 38 or 40 mm
Overall height: 10.6 mm
Dial: whitened guilloché Silver
Hands: blued Steel
Calibre 1300.3

Technical Specifications

Indications :

    Centre hours and minutes
    Small seconds at 4:30
    Large date
    Power-reserve indicator at 9h00
    Moon phase

Dimensions :
  • Overall diameter : 34.60 mm
  • Casing-up diameter : 30.40 mm
  • Overall height : 5.80 mm
  • Height of winding stem : 3.10 mm
  • Diameter of stem thread : S0.90 mm
  • Case Diameter : 40.00 mm
  • Overall Thickness : 10.6 mm
Characteristics :

    In-line lever escapement, 15-tooth wheel
    Balance with 4 inertia weights
    Flat Anachron microflamed spring
    Mobile stud holder
    Free-sprung balance
    Virolage laser Nivatronic
    Pinned GE stud
    Three-position crown Slipping mainspring
    Off-centre winding rotor

WINDING SPEED :

    on rotator:
    274 clockwise revolutions/24 hours (without mainspring slipping)

Characteristics :

    Uni-directional automatic winding
    Date setting by turning crown in opposite ways (position 2)
    Time setting with crown in position 3
    Instantaneous date change

FREQUENCY :

    21'600 Alt/h, (3Hz)

Balance :

    Inertia: 10.10 mg*cm2
    Angle of lift: 52°

Amplitude :

    12 h dial up : 280°
    90 h dial up : 220°

Autonomy :

    160 ± 10 hours

Number of jewels :

    36

Finish :

    High grade
    Circular stripes on the bridges
    Baseplate partly circular grained
    Polished screw heads with chamfered slots
    Pegs with polished rounded ends
    Steelwork with polished chamfers

Number of parts :

    Movement 271
    Cased up with strap 295

Indications :

    Centre hours and minutes
    Small seconds at 4:30
    Large date
    Power-reserve indicator at 9h00
    Moon phase

Dimensions :
  • Overall diameter : 34.60 mm
  • Casing-up diameter : 30.40 mm
  • Overall height : 5.80 mm
  • Height of winding stem : 3.10 mm
  • Diameter of stem thread : S0.90 mm
  • Case Diameter : 40.00 mm
  • Overall Thickness : 10.6 mm
Characteristics :

    In-line lever escapement, 15-tooth wheel
    Balance with 4 inertia weights
    Flat Anachron microflamed spring
    Mobile stud holder
    Free-sprung balance
    Virolage laser Nivatronic
    Pinned GE stud
    Three-position crown Slipping mainspring
    Off-centre winding rotor

WINDING SPEED :

    on rotator:
    274 clockwise revolutions/24 hours (without mainspring slipping)

Characteristics :

    Uni-directional automatic winding
    Date setting by turning crown in opposite ways (position 2)
    Time setting with crown in position 3
    Instantaneous date change

FREQUENCY :

    21'600 Alt/h, (3Hz)

Balance :

    Inertia: 10.10 mg*cm2
    Angle of lift: 52°

Amplitude :

    12 h dial up : 280°
    90 h dial up : 220°

Autonomy :

    160 ± 10 hours

Number of jewels :

    36

Finish :

    High grade
    Circular stripes on the bridges
    Baseplate partly circular grained
    Polished screw heads with chamfered slots
    Pegs with polished rounded ends
    Steelwork with polished chamfers

Number of parts :

    Movement 271
    Cased up with strap 295


At the heart of the movement
At the heart of the movement
Brevet - EP 1 760 544 A1
fpjourne

Technical description


(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance

Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.

Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
Brevet - EP 1 760 544 A1
fpjourne

Technical description


(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance

Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.

Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
Platinum case and bracelet
Diameter: 38 or 40 mm
Overall height: 10.6 mm
Dial: whitened guilloché Silver
Hands: blued Steel
Calibre 1300.3

Technical Specifications

Indications :

    Centre hours and minutes
    Small seconds at 4:30
    Large date
    Power-reserve indicator at 9h00
    Moon phase

Dimensions :
  • Overall diameter : 34.60 mm
  • Casing-up diameter : 30.40 mm
  • Overall height : 5.80 mm
  • Height of winding stem : 3.10 mm
  • Diameter of stem thread : S0.90 mm
  • Case Diameter : 40.00 mm
  • Overall Thickness : 10.6 mm
Characteristics :

    In-line lever escapement, 15-tooth wheel
    Balance with 4 inertia weights
    Flat Anachron microflamed spring
    Mobile stud holder
    Free-sprung balance
    Virolage laser Nivatronic
    Pinned GE stud
    Three-position crown Slipping mainspring
    Off-centre winding rotor

WINDING SPEED :

    on rotator:
    274 clockwise revolutions/24 hours (without mainspring slipping)

Characteristics :

    Uni-directional automatic winding
    Date setting by turning crown in opposite ways (position 2)
    Time setting with crown in position 3
    Instantaneous date change

FREQUENCY :

    21'600 Alt/h, (3Hz)

Balance :

    Inertia: 10.10 mg*cm2
    Angle of lift: 52°

Amplitude :

    12 h dial up : 280°
    90 h dial up : 220°

Autonomy :

    160 ± 10 hours

Number of jewels :

    36

Finish :

    High grade
    Circular stripes on the bridges
    Baseplate partly circular grained
    Polished screw heads with chamfered slots
    Pegs with polished rounded ends
    Steelwork with polished chamfers

Number of parts :

    Movement 271
    Cased up with strap 295

Indications :

    Centre hours and minutes
    Small seconds at 4:30
    Large date
    Power-reserve indicator at 9h00
    Moon phase

Dimensions :
  • Overall diameter : 34.60 mm
  • Casing-up diameter : 30.40 mm
  • Overall height : 5.80 mm
  • Height of winding stem : 3.10 mm
  • Diameter of stem thread : S0.90 mm
  • Case Diameter : 40.00 mm
  • Overall Thickness : 10.6 mm
Characteristics :

    In-line lever escapement, 15-tooth wheel
    Balance with 4 inertia weights
    Flat Anachron microflamed spring
    Mobile stud holder
    Free-sprung balance
    Virolage laser Nivatronic
    Pinned GE stud
    Three-position crown Slipping mainspring
    Off-centre winding rotor

WINDING SPEED :

    on rotator:
    274 clockwise revolutions/24 hours (without mainspring slipping)

Characteristics :

    Uni-directional automatic winding
    Date setting by turning crown in opposite ways (position 2)
    Time setting with crown in position 3
    Instantaneous date change

FREQUENCY :

    21'600 Alt/h, (3Hz)

Balance :

    Inertia: 10.10 mg*cm2
    Angle of lift: 52°

Amplitude :

    12 h dial up : 280°
    90 h dial up : 220°

Autonomy :

    160 ± 10 hours

Number of jewels :

    36

Finish :

    High grade
    Circular stripes on the bridges
    Baseplate partly circular grained
    Polished screw heads with chamfered slots
    Pegs with polished rounded ends
    Steelwork with polished chamfers

Number of parts :

    Movement 271
    Cased up with strap 295


At the heart of the movement
At the heart of the movement
Brevet - EP 1 760 544 A1
fpjourne

Technical description


(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance

Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.

Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
Brevet - EP 1 760 544 A1
fpjourne

Technical description


(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance

Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.

Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
18K 6N Gold case and bracelet
Diameter: 38 or 40 mm
Overall height: 10.6 mm
Dial: whitened guilloché Silver
Hands: blued Steel
Calibre 1300.3

Technical Specifications

Indications :

    Centre hours and minutes
    Small seconds at 4:30
    Large date
    Power-reserve indicator at 9h00
    Moon phase

Dimensions :
  • Overall diameter : 34.60 mm
  • Casing-up diameter : 30.40 mm
  • Overall height : 5.80 mm
  • Height of winding stem : 3.10 mm
  • Diameter of stem thread : S0.90 mm
  • Case Diameter : 40.00 mm
  • Overall Thickness : 10.6 mm
Characteristics :

    In-line lever escapement, 15-tooth wheel
    Balance with 4 inertia weights
    Flat Anachron microflamed spring
    Mobile stud holder
    Free-sprung balance
    Virolage laser Nivatronic
    Pinned GE stud
    Three-position crown Slipping mainspring
    Off-centre winding rotor

WINDING SPEED :

    on rotator:
    274 clockwise revolutions/24 hours (without mainspring slipping)

Characteristics :

    Uni-directional automatic winding
    Date setting by turning crown in opposite ways (position 2)
    Time setting with crown in position 3
    Instantaneous date change

FREQUENCY :

    21'600 Alt/h, (3Hz)

Balance :

    Inertia: 10.10 mg*cm2
    Angle of lift: 52°

Amplitude :

    12 h dial up : 280°
    90 h dial up : 220°

Autonomy :

    160 ± 10 hours

Number of jewels :

    36

Finish :

    High grade
    Circular stripes on the bridges
    Baseplate partly circular grained
    Polished screw heads with chamfered slots
    Pegs with polished rounded ends
    Steelwork with polished chamfers

Number of parts :

    Movement 271
    Cased up with strap 295

Indications :

    Centre hours and minutes
    Small seconds at 4:30
    Large date
    Power-reserve indicator at 9h00
    Moon phase

Dimensions :
  • Overall diameter : 34.60 mm
  • Casing-up diameter : 30.40 mm
  • Overall height : 5.80 mm
  • Height of winding stem : 3.10 mm
  • Diameter of stem thread : S0.90 mm
  • Case Diameter : 40.00 mm
  • Overall Thickness : 10.6 mm
Characteristics :

    In-line lever escapement, 15-tooth wheel
    Balance with 4 inertia weights
    Flat Anachron microflamed spring
    Mobile stud holder
    Free-sprung balance
    Virolage laser Nivatronic
    Pinned GE stud
    Three-position crown Slipping mainspring
    Off-centre winding rotor

WINDING SPEED :

    on rotator:
    274 clockwise revolutions/24 hours (without mainspring slipping)

Characteristics :

    Uni-directional automatic winding
    Date setting by turning crown in opposite ways (position 2)
    Time setting with crown in position 3
    Instantaneous date change

FREQUENCY :

    21'600 Alt/h, (3Hz)

Balance :

    Inertia: 10.10 mg*cm2
    Angle of lift: 52°

Amplitude :

    12 h dial up : 280°
    90 h dial up : 220°

Autonomy :

    160 ± 10 hours

Number of jewels :

    36

Finish :

    High grade
    Circular stripes on the bridges
    Baseplate partly circular grained
    Polished screw heads with chamfered slots
    Pegs with polished rounded ends
    Steelwork with polished chamfers

Number of parts :

    Movement 271
    Cased up with strap 295


At the heart of the movement
At the heart of the movement
Brevet - EP 1 760 544 A1
fpjourne

Technical description


(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance

Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.

Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
Brevet - EP 1 760 544 A1
fpjourne

Technical description


(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance

Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.

Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
Platinum case
Diameter: 40 mm
Overall height: 10.6 mm
Dial: white Gold, Gold numerals surfaced with a diamond tool
Hands: rhodium plated Steel
Calibre 1300.3

Technical Specifications

Indications :

    Centre hours and minutes
    Small seconds at 4:30
    Large date
    Power-reserve indicator at 9h00
    Moon phase

Dimensions :
  • Overall diameter : 34.60 mm
  • Casing-up diameter : 30.40 mm
  • Overall height : 5.80 mm
  • Height of winding stem : 3.10 mm
  • Diameter of stem thread : S0.90 mm
  • Case Diameter : 40.00 mm
  • Overall Thickness : 10.6 mm
Characteristics :

    In-line lever escapement, 15-tooth wheel
    Balance with 4 inertia weights
    Flat Anachron microflamed spring
    Mobile stud holder
    Free-sprung balance
    Virolage laser Nivatronic
    Pinned GE stud
    Three-position crown Slipping mainspring
    Off-centre winding rotor

WINDING SPEED :

    on rotator:
    274 clockwise revolutions/24 hours (without mainspring slipping)

Characteristics :

    Uni-directional automatic winding
    Date setting by turning crown in opposite ways (position 2)
    Time setting with crown in position 3
    Instantaneous date change

FREQUENCY :

    21'600 Alt/h, (3Hz)

Balance :

    Inertia: 10.10 mg*cm2
    Angle of lift: 52°

Amplitude :

    12 h dial up : 280°
    90 h dial up : 220°

Autonomy :

    160 ± 10 hours

Number of jewels :

    36

Finish :

    High grade
    Circular stripes on the bridges
    Baseplate partly circular grained
    Polished screw heads with chamfered slots
    Pegs with polished rounded ends
    Steelwork with polished chamfers

Number of parts :

    Movement 271
    Cased up with strap 295

Indications :

    Centre hours and minutes
    Small seconds at 4:30
    Large date
    Power-reserve indicator at 9h00
    Moon phase

Dimensions :
  • Overall diameter : 34.60 mm
  • Casing-up diameter : 30.40 mm
  • Overall height : 5.80 mm
  • Height of winding stem : 3.10 mm
  • Diameter of stem thread : S0.90 mm
  • Case Diameter : 40.00 mm
  • Overall Thickness : 10.6 mm
Characteristics :

    In-line lever escapement, 15-tooth wheel
    Balance with 4 inertia weights
    Flat Anachron microflamed spring
    Mobile stud holder
    Free-sprung balance
    Virolage laser Nivatronic
    Pinned GE stud
    Three-position crown Slipping mainspring
    Off-centre winding rotor

WINDING SPEED :

    on rotator:
    274 clockwise revolutions/24 hours (without mainspring slipping)

Characteristics :

    Uni-directional automatic winding
    Date setting by turning crown in opposite ways (position 2)
    Time setting with crown in position 3
    Instantaneous date change

FREQUENCY :

    21'600 Alt/h, (3Hz)

Balance :

    Inertia: 10.10 mg*cm2
    Angle of lift: 52°

Amplitude :

    12 h dial up : 280°
    90 h dial up : 220°

Autonomy :

    160 ± 10 hours

Number of jewels :

    36

Finish :

    High grade
    Circular stripes on the bridges
    Baseplate partly circular grained
    Polished screw heads with chamfered slots
    Pegs with polished rounded ends
    Steelwork with polished chamfers

Number of parts :

    Movement 271
    Cased up with strap 295


At the heart of the movement
At the heart of the movement
Brevet - EP 1 760 544 A1
fpjourne

Technical description


(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance

Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.

Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
Brevet - EP 1 760 544 A1
fpjourne

Technical description


(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance

Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.

Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
18K 6N Gold case
Diameter: 40 mm
Overall height: 10.6 mm
Dial: white Gold, Gold numerals surfaced with a diamond tool
Hands: 5N gilt Steel
Calibre 1300.3

Technical Specifications

Indications :

    Centre hours and minutes
    Small seconds at 4:30
    Large date
    Power-reserve indicator at 9h00
    Moon phase

Dimensions :
  • Overall diameter : 34.60 mm
  • Casing-up diameter : 30.40 mm
  • Overall height : 5.80 mm
  • Height of winding stem : 3.10 mm
  • Diameter of stem thread : S0.90 mm
  • Case Diameter : 40.00 mm
  • Overall Thickness : 10.6 mm
Characteristics :

    In-line lever escapement, 15-tooth wheel
    Balance with 4 inertia weights
    Flat Anachron microflamed spring
    Mobile stud holder
    Free-sprung balance
    Virolage laser Nivatronic
    Pinned GE stud
    Three-position crown Slipping mainspring
    Off-centre winding rotor

WINDING SPEED :

    on rotator:
    274 clockwise revolutions/24 hours (without mainspring slipping)

Characteristics :

    Uni-directional automatic winding
    Date setting by turning crown in opposite ways (position 2)
    Time setting with crown in position 3
    Instantaneous date change

FREQUENCY :

    21'600 Alt/h, (3Hz)

Balance :

    Inertia: 10.10 mg*cm2
    Angle of lift: 52°

Amplitude :

    12 h dial up : 280°
    90 h dial up : 220°

Autonomy :

    160 ± 10 hours

Number of jewels :

    36

Finish :

    High grade
    Circular stripes on the bridges
    Baseplate partly circular grained
    Polished screw heads with chamfered slots
    Pegs with polished rounded ends
    Steelwork with polished chamfers

Number of parts :

    Movement 271
    Cased up with strap 295

Indications :

    Centre hours and minutes
    Small seconds at 4:30
    Large date
    Power-reserve indicator at 9h00
    Moon phase

Dimensions :
  • Overall diameter : 34.60 mm
  • Casing-up diameter : 30.40 mm
  • Overall height : 5.80 mm
  • Height of winding stem : 3.10 mm
  • Diameter of stem thread : S0.90 mm
  • Case Diameter : 40.00 mm
  • Overall Thickness : 10.6 mm
Characteristics :

    In-line lever escapement, 15-tooth wheel
    Balance with 4 inertia weights
    Flat Anachron microflamed spring
    Mobile stud holder
    Free-sprung balance
    Virolage laser Nivatronic
    Pinned GE stud
    Three-position crown Slipping mainspring
    Off-centre winding rotor

WINDING SPEED :

    on rotator:
    274 clockwise revolutions/24 hours (without mainspring slipping)

Characteristics :

    Uni-directional automatic winding
    Date setting by turning crown in opposite ways (position 2)
    Time setting with crown in position 3
    Instantaneous date change

FREQUENCY :

    21'600 Alt/h, (3Hz)

Balance :

    Inertia: 10.10 mg*cm2
    Angle of lift: 52°

Amplitude :

    12 h dial up : 280°
    90 h dial up : 220°

Autonomy :

    160 ± 10 hours

Number of jewels :

    36

Finish :

    High grade
    Circular stripes on the bridges
    Baseplate partly circular grained
    Polished screw heads with chamfered slots
    Pegs with polished rounded ends
    Steelwork with polished chamfers

Number of parts :

    Movement 271
    Cased up with strap 295


At the heart of the movement
At the heart of the movement
Brevet - EP 1 760 544 A1
fpjourne

Technical description


(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance

Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.

Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
Brevet - EP 1 760 544 A1
fpjourne

Technical description


(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance

Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.

Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.

OCTA Automatique Lune Calibre 1300.3 FP Journe FP Journe

Other views
F.P.Journe
F.P.Journe
Other views
F.P.Journe
F.P.Journe
Other views
F.P.Journe
F.P.Journe
Other views
F.P.Journe
F.P.Journe
Other views
F.P.Journe
Other views
F.P.Journe

About

THIS MODEL WAS PRODUCED BETWEEN 2007 AND 2018.

A constant search for functionality produces the new Octa 1300.3 calibre. In his approach as an innovative and creative watchmaker, François-Paul Journe does not hesitate in constantly improving his creations. This is the case with the conception of this new calibre which offers an automatic winding system in adequacy with the less mobile users.

In 2001, when the creative watchmaker presented the Octa line - a collection of mechanical wristwatch chronometers with automatic winding systems offering a 120-hour power reserve, all of which have the same case size regardless of the complication - the success is immediate!

The Octa collection satisfies a clientele looking for authentic, rare and innovative horology in an "easy to wear" mechanical wristwatch. The Octa collection is available in a variety of complications such as a chronograph, an annual calendar or a moon phases, thus satisfying a variety of clients’ needs.

In his testimony on the creation of his first calibre with automatic movement signed F.P.Journe -Invenit et Fecit-, François-Paul Journe explains his philosophy, focusing on the difficulty in creating a global collection with exactly the same size case regardless of the complication. But, his real challenge was to provide an elegant, innovative line developed on a calibre offering chronometry and unrelenting stability with an automatic movement on a variable inertia balance wheel. The Octa line was born...

Optimized winding system
Always taking into account the notes and observations concerning his products, François-Paul Journe states: «I realized that one of my friend’s Octa was never completely wound because he works on a computer and his right hand doesn’t move enough.»

It is from this observation that he created the new Octa calibre (1300.3) that uses the slightest movement to automatically wind the watch. With talent, the watchmaker turns the problem around, and creates a new rotor that winds in only one direction with a ball bearing system, contrary to the first Octa calibre. The ceramic balls allow the rotor to move in one direction and block it in the other. When the user is immobile, the rotor goes back to its original position. In this way, every infinitesimal movement is maximally exploited for an optimized winding of the watch.

The new calibre retains the characteristics of the classic Octa with: a five-day power reserve (120h) and a variable inertia balance wheel for an optimum yield that offers each model of the Octa line an irreproachable stability.

Also in accordance to his clients’ observations, François-Paul Journe takes advantage of this new calibre to offer two new models with central hands : «Some of our clients told me they had difficulty reading the time on the classical Octa dial, so I took advantage of the new calibre’s creation to build the Octa Automatic Reserve and the Automatic Lune whose dials are inspired by that of the Chonomètre Souverain - watch that won the Geneva Watchmaking Grand Prix in 2005 in the Men’s Watch category».
Testimony
Calibre OCTA

A horological ideal

“The construction of the Octa calibre has less powerful ties with horological history than do the constant-force device or resonance models, but it symbolises an horological ideal of giving timekeepers the highest possible degree of precision and autonomy!

One can indeed note the fact that if church clocks are placed so high, in addition to enhancing visibility, it was mostly because it often took an entire month for the driving-weights to drop the length of their cords. Numerous systems were invented to increase the operating duration of timekeeping devices, meeting with various degrees of success. Given the small volume of a wristwatch, the size of the mainspring was automatically limited. Watchmakers therefore discovered the trick of adding an extra wheel to the customary geartrain in order to extend the duration of its development. Unfortunately, actually using this system, even with a stronger spring, led them to observe that the level of energy actually reaching the balance remained low. To compensate for this, they fitted a smaller balance using less energy, but which was also less stable. It is therefore not unusual to find that some watches able to run for several days display an extremely unpredictable level of precision.

This challenge was a powerful source of motivation! I then imagined that the best and the most obvious means of extending the running duration would be to extend the capacity of the spring development. The difficulty lay in integrating it on the same level as the gear-train and the escapement, given its stability: 1 metre and 1 millimetre thick. Thanks to the low torque of this spring, I could achieve extremely fast automatic winding (one and a half hours on a Chappuis cyclotest for over 5 days’ running).

Once the challenge of autonomy was thus successfully met with this automatic winding calibre, I knuckled down to the second challenge of managing to insert various complications into that same movement: power reserve with large date display, fly-back chronograph with large date display, retrograde annual calendar, etc… and of doing so while maintaining an identical size for all models.

Three years of research and development were required before this automatic winding movement that is unique in the world could be presented to the public.”

François-Paul Journe

Technical Specifications

Indications :

    Centre hours and minutes
    Small seconds at 4:30
    Large date
    Power-reserve indicator at 9h00
    Moon phase

Dimensions :
  • Overall diameter : 34.60 mm
  • Casing-up diameter : 30.40 mm
  • Overall height : 5.80 mm
  • Height of winding stem : 3.10 mm
  • Diameter of stem thread : S0.90 mm
  • Case Diameter : 40.00 mm
  • Overall Thickness : 10.6 mm
Characteristics :

    In-line lever escapement, 15-tooth wheel
    Balance with 4 inertia weights
    Flat Anachron microflamed spring
    Mobile stud holder
    Free-sprung balance
    Virolage laser Nivatronic
    Pinned GE stud
    Three-position crown Slipping mainspring
    Off-centre winding rotor

WINDING SPEED :

    on rotator:
    274 clockwise revolutions/24 hours (without mainspring slipping)

Characteristics :

    Uni-directional automatic winding
    Date setting by turning crown in opposite ways (position 2)
    Time setting with crown in position 3
    Instantaneous date change

FREQUENCY :

    21'600 Alt/h, (3Hz)

Balance :

    Inertia: 10.10 mg*cm2
    Angle of lift: 52°

Amplitude :

    12 h dial up : 280°
    90 h dial up : 220°

Autonomy :

    160 ± 10 hours

Number of jewels :

    36

Finish :

    High grade
    Circular stripes on the bridges
    Baseplate partly circular grained
    Polished screw heads with chamfered slots
    Pegs with polished rounded ends
    Steelwork with polished chamfers

Number of parts :

    Movement 271
    Cased up with strap 295

Indications :

    Centre hours and minutes
    Small seconds at 4:30
    Large date
    Power-reserve indicator at 9h00
    Moon phase

Dimensions :
  • Overall diameter : 34.60 mm
  • Casing-up diameter : 30.40 mm
  • Overall height : 5.80 mm
  • Height of winding stem : 3.10 mm
  • Diameter of stem thread : S0.90 mm
  • Case Diameter : 40.00 mm
  • Overall Thickness : 10.6 mm
Characteristics :

    In-line lever escapement, 15-tooth wheel
    Balance with 4 inertia weights
    Flat Anachron microflamed spring
    Mobile stud holder
    Free-sprung balance
    Virolage laser Nivatronic
    Pinned GE stud
    Three-position crown Slipping mainspring
    Off-centre winding rotor

WINDING SPEED :

    on rotator:
    274 clockwise revolutions/24 hours (without mainspring slipping)

Characteristics :

    Uni-directional automatic winding
    Date setting by turning crown in opposite ways (position 2)
    Time setting with crown in position 3
    Instantaneous date change

FREQUENCY :

    21'600 Alt/h, (3Hz)

Balance :

    Inertia: 10.10 mg*cm2
    Angle of lift: 52°

Amplitude :

    12 h dial up : 280°
    90 h dial up : 220°

Autonomy :

    160 ± 10 hours

Number of jewels :

    36

Finish :

    High grade
    Circular stripes on the bridges
    Baseplate partly circular grained
    Polished screw heads with chamfered slots
    Pegs with polished rounded ends
    Steelwork with polished chamfers

Number of parts :

    Movement 271
    Cased up with strap 295


At the heart of the movement
At the heart of the movement
Brevet - EP 1 760 544 A1
fpjourne

Technical description


(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance

Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.

Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
Brevet - EP 1 760 544 A1
fpjourne

Technical description


(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance

Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.

Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
  • About

    THIS MODEL WAS PRODUCED BETWEEN 2007 AND 2018.

    A constant search for functionality produces the new Octa 1300.3 calibre. In his approach as an innovative and creative watchmaker, François-Paul Journe does not hesitate in constantly improving his creations. This is the case with the conception of this new calibre which offers an automatic winding system in adequacy with the less mobile users.

    In 2001, when the creative watchmaker presented the Octa line - a collection of mechanical wristwatch chronometers with automatic winding systems offering a 120-hour power reserve, all of which have the same case size regardless of the complication - the success is immediate!

    The Octa collection satisfies a clientele looking for authentic, rare and innovative horology in an "easy to wear" mechanical wristwatch. The Octa collection is available in a variety of complications such as a chronograph, an annual calendar or a moon phases, thus satisfying a variety of clients’ needs.

    In his testimony on the creation of his first calibre with automatic movement signed F.P.Journe -Invenit et Fecit-, François-Paul Journe explains his philosophy, focusing on the difficulty in creating a global collection with exactly the same size case regardless of the complication. But, his real challenge was to provide an elegant, innovative line developed on a calibre offering chronometry and unrelenting stability with an automatic movement on a variable inertia balance wheel. The Octa line was born...

    Optimized winding system
    Always taking into account the notes and observations concerning his products, François-Paul Journe states: «I realized that one of my friend’s Octa was never completely wound because he works on a computer and his right hand doesn’t move enough.»

    It is from this observation that he created the new Octa calibre (1300.3) that uses the slightest movement to automatically wind the watch. With talent, the watchmaker turns the problem around, and creates a new rotor that winds in only one direction with a ball bearing system, contrary to the first Octa calibre. The ceramic balls allow the rotor to move in one direction and block it in the other. When the user is immobile, the rotor goes back to its original position. In this way, every infinitesimal movement is maximally exploited for an optimized winding of the watch.

    The new calibre retains the characteristics of the classic Octa with: a five-day power reserve (120h) and a variable inertia balance wheel for an optimum yield that offers each model of the Octa line an irreproachable stability.

    Also in accordance to his clients’ observations, François-Paul Journe takes advantage of this new calibre to offer two new models with central hands : «Some of our clients told me they had difficulty reading the time on the classical Octa dial, so I took advantage of the new calibre’s creation to build the Octa Automatic Reserve and the Automatic Lune whose dials are inspired by that of the Chonomètre Souverain - watch that won the Geneva Watchmaking Grand Prix in 2005 in the Men’s Watch category».
  • Testimony

    Calibre OCTA

    A horological ideal

    “The construction of the Octa calibre has less powerful ties with horological history than do the constant-force device or resonance models, but it symbolises an horological ideal of giving timekeepers the highest possible degree of precision and autonomy!

    One can indeed note the fact that if church clocks are placed so high, in addition to enhancing visibility, it was mostly because it often took an entire month for the driving-weights to drop the length of their cords. Numerous systems were invented to increase the operating duration of timekeeping devices, meeting with various degrees of success. Given the small volume of a wristwatch, the size of the mainspring was automatically limited. Watchmakers therefore discovered the trick of adding an extra wheel to the customary geartrain in order to extend the duration of its development. Unfortunately, actually using this system, even with a stronger spring, led them to observe that the level of energy actually reaching the balance remained low. To compensate for this, they fitted a smaller balance using less energy, but which was also less stable. It is therefore not unusual to find that some watches able to run for several days display an extremely unpredictable level of precision.

    This challenge was a powerful source of motivation! I then imagined that the best and the most obvious means of extending the running duration would be to extend the capacity of the spring development. The difficulty lay in integrating it on the same level as the gear-train and the escapement, given its stability: 1 metre and 1 millimetre thick. Thanks to the low torque of this spring, I could achieve extremely fast automatic winding (one and a half hours on a Chappuis cyclotest for over 5 days’ running).

    Once the challenge of autonomy was thus successfully met with this automatic winding calibre, I knuckled down to the second challenge of managing to insert various complications into that same movement: power reserve with large date display, fly-back chronograph with large date display, retrograde annual calendar, etc… and of doing so while maintaining an identical size for all models.

    Three years of research and development were required before this automatic winding movement that is unique in the world could be presented to the public.”

    François-Paul Journe
  • Technical description

    Technical Specifications

    Indications :

      Centre hours and minutes
      Small seconds at 4:30
      Large date
      Power-reserve indicator at 9h00
      Moon phase

    Dimensions :
    • Overall diameter : 34.60 mm
    • Casing-up diameter : 30.40 mm
    • Overall height : 5.80 mm
    • Height of winding stem : 3.10 mm
    • Diameter of stem thread : S0.90 mm
    • Case Diameter : 40.00 mm
    • Overall Thickness : 10.6 mm
    Characteristics :

      In-line lever escapement, 15-tooth wheel
      Balance with 4 inertia weights
      Flat Anachron microflamed spring
      Mobile stud holder
      Free-sprung balance
      Virolage laser Nivatronic
      Pinned GE stud
      Three-position crown Slipping mainspring
      Off-centre winding rotor

    WINDING SPEED :

      on rotator:
      274 clockwise revolutions/24 hours (without mainspring slipping)

    Characteristics :

      Uni-directional automatic winding
      Date setting by turning crown in opposite ways (position 2)
      Time setting with crown in position 3
      Instantaneous date change

    FREQUENCY :

      21'600 Alt/h, (3Hz)

    Balance :

      Inertia: 10.10 mg*cm2
      Angle of lift: 52°

    Amplitude :

      12 h dial up : 280°
      90 h dial up : 220°

    Autonomy :

      160 ± 10 hours

    Number of jewels :

      36

    Finish :

      High grade
      Circular stripes on the bridges
      Baseplate partly circular grained
      Polished screw heads with chamfered slots
      Pegs with polished rounded ends
      Steelwork with polished chamfers

    Number of parts :

      Movement 271
      Cased up with strap 295

    Indications :

      Centre hours and minutes
      Small seconds at 4:30
      Large date
      Power-reserve indicator at 9h00
      Moon phase

    Dimensions :
    • Overall diameter : 34.60 mm
    • Casing-up diameter : 30.40 mm
    • Overall height : 5.80 mm
    • Height of winding stem : 3.10 mm
    • Diameter of stem thread : S0.90 mm
    • Case Diameter : 40.00 mm
    • Overall Thickness : 10.6 mm
    Characteristics :

      In-line lever escapement, 15-tooth wheel
      Balance with 4 inertia weights
      Flat Anachron microflamed spring
      Mobile stud holder
      Free-sprung balance
      Virolage laser Nivatronic
      Pinned GE stud
      Three-position crown Slipping mainspring
      Off-centre winding rotor

    WINDING SPEED :

      on rotator:
      274 clockwise revolutions/24 hours (without mainspring slipping)

    Characteristics :

      Uni-directional automatic winding
      Date setting by turning crown in opposite ways (position 2)
      Time setting with crown in position 3
      Instantaneous date change

    FREQUENCY :

      21'600 Alt/h, (3Hz)

    Balance :

      Inertia: 10.10 mg*cm2
      Angle of lift: 52°

    Amplitude :

      12 h dial up : 280°
      90 h dial up : 220°

    Autonomy :

      160 ± 10 hours

    Number of jewels :

      36

    Finish :

      High grade
      Circular stripes on the bridges
      Baseplate partly circular grained
      Polished screw heads with chamfered slots
      Pegs with polished rounded ends
      Steelwork with polished chamfers

    Number of parts :

      Movement 271
      Cased up with strap 295


    At the heart of the movement
    At the heart of the movement
    Brevet - EP 1 760 544 A1
    fpjourne

    Technical description


    (1) 22K Gold rotor with uni-directional winding
    (2) Large capacity mainspring barrel
    (3) Precision-adjustment weights
    (4) Full-size free-sprung chronometer balance

    Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.

    Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
    Brevet - EP 1 760 544 A1
    fpjourne

    Technical description


    (1) 22K Gold rotor with uni-directional winding
    (2) Large capacity mainspring barrel
    (3) Precision-adjustment weights
    (4) Full-size free-sprung chronometer balance

    Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.

    Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.

Technical Specifications

Indications :

    Centre hours and minutes
    Small seconds at 4:30
    Large date
    Power-reserve indicator at 9h00
    Moon phase

Dimensions :
  • Overall diameter : 34.60 mm
  • Casing-up diameter : 30.40 mm
  • Overall height : 5.80 mm
  • Height of winding stem : 3.10 mm
  • Diameter of stem thread : S0.90 mm
  • Case Diameter : 40.00 mm
  • Overall Thickness : 10.6 mm
Characteristics :

    In-line lever escapement, 15-tooth wheel
    Balance with 4 inertia weights
    Flat Anachron microflamed spring
    Mobile stud holder
    Free-sprung balance
    Virolage laser Nivatronic
    Pinned GE stud
    Three-position crown Slipping mainspring
    Off-centre winding rotor

WINDING SPEED :

    on rotator:
    274 clockwise revolutions/24 hours (without mainspring slipping)

Characteristics :

    Uni-directional automatic winding
    Date setting by turning crown in opposite ways (position 2)
    Time setting with crown in position 3
    Instantaneous date change

FREQUENCY :

    21'600 Alt/h, (3Hz)

Balance :

    Inertia: 10.10 mg*cm2
    Angle of lift: 52°

Amplitude :

    12 h dial up : 280°
    90 h dial up : 220°

Autonomy :

    160 ± 10 hours

Number of jewels :

    36

Finish :

    High grade
    Circular stripes on the bridges
    Baseplate partly circular grained
    Polished screw heads with chamfered slots
    Pegs with polished rounded ends
    Steelwork with polished chamfers

Number of parts :

    Movement 271
    Cased up with strap 295

Indications :

    Centre hours and minutes
    Small seconds at 4:30
    Large date
    Power-reserve indicator at 9h00
    Moon phase

Dimensions :
  • Overall diameter : 34.60 mm
  • Casing-up diameter : 30.40 mm
  • Overall height : 5.80 mm
  • Height of winding stem : 3.10 mm
  • Diameter of stem thread : S0.90 mm
  • Case Diameter : 40.00 mm
  • Overall Thickness : 10.6 mm
Characteristics :

    In-line lever escapement, 15-tooth wheel
    Balance with 4 inertia weights
    Flat Anachron microflamed spring
    Mobile stud holder
    Free-sprung balance
    Virolage laser Nivatronic
    Pinned GE stud
    Three-position crown Slipping mainspring
    Off-centre winding rotor

WINDING SPEED :

    on rotator:
    274 clockwise revolutions/24 hours (without mainspring slipping)

Characteristics :

    Uni-directional automatic winding
    Date setting by turning crown in opposite ways (position 2)
    Time setting with crown in position 3
    Instantaneous date change

FREQUENCY :

    21'600 Alt/h, (3Hz)

Balance :

    Inertia: 10.10 mg*cm2
    Angle of lift: 52°

Amplitude :

    12 h dial up : 280°
    90 h dial up : 220°

Autonomy :

    160 ± 10 hours

Number of jewels :

    36

Finish :

    High grade
    Circular stripes on the bridges
    Baseplate partly circular grained
    Polished screw heads with chamfered slots
    Pegs with polished rounded ends
    Steelwork with polished chamfers

Number of parts :

    Movement 271
    Cased up with strap 295


At the heart of the movement
At the heart of the movement
Brevet - EP 1 760 544 A1
fpjourne

Technical description


(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance

Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.

Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
Brevet - EP 1 760 544 A1
fpjourne

Technical description


(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance

Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.

Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.