Calibre 1518 https://fpjourne.com/en/collection/boutique-collection/boutique-edition-chronographe-rattrapante FP Journe https://fpjourne.com/en FP Journe

Diameter: 44 mm
Overall height: 12.1 mm
Dial: blackened guilloché Silver dial, matte 5N Gold appliqué numerals, counters in whitened guilloché Silver
Hands: matte 5N gilt Steel, ivory coloured Steel and blued Steel
Technical Specifications
In 18K rose Gold
Mechanical with manual winding
38 turns of crown
Movement without dial: 285
Cased up with strap: 453
Jewels: 29
Overall diameter: 33.60 mm
Casing-up diameter: 33.20 mm
Overall height: 6.80 mm
Height of hands: 2.20 mm
Diameter of stem thread: S1.20 mm
In-line lever escapement, 15-tooth escape wheel
Chronometric with four adjustable inertia weights
Anachron balance spring
Mobile stud holders
Free-sprung balance
Nivatronic laser-welded to collet
Pinned GE stud
Frequency: 21,600 v/h (3Hz)
Inertia: 10.10 mg*cm2
Angle of lift: 52°
Crown with 3 positions
Position 1: winding
Position 2: correction of the date
Position 3: time setting
Pusher chronograph to start, stop and back to zero at 2h
Pusher split-second at 4h
0h dial up: 300°
24h dial up: 260°
80 ± 2 hours without the chronograph
Circular stripes on the bridges, circular graining on the baseplate, polished screw heads with chamfered slots, pegs with polished rounded ends, straight-grained steel work
In 18K rose Gold
Mechanical with manual winding
38 turns of crown
Movement without dial: 285
Cased up with strap: 453
Jewels: 29
Overall diameter: 33.60 mm
Casing-up diameter: 33.20 mm
Overall height: 6.80 mm
Height of hands: 2.20 mm
Diameter of stem thread: S1.20 mm
In-line lever escapement, 15-tooth escape wheel
Chronometric with four adjustable inertia weights
Anachron balance spring
Mobile stud holders
Free-sprung balance
Nivatronic laser-welded to collet
Pinned GE stud
Frequency: 21,600 v/h (3Hz)
Inertia: 10.10 mg*cm2
Angle of lift: 52°
Crown with 3 positions
Position 1: winding
Position 2: correction of the date
Position 3: time setting
Pusher chronograph to start, stop and back to zero at 2h
Pusher split-second at 4h
0h dial up: 300°
24h dial up: 260°
80 ± 2 hours without the chronograph
Circular stripes on the bridges, circular graining on the baseplate, polished screw heads with chamfered slots, pegs with polished rounded ends, straight-grained steel work
Technical description
The calibre 1518 with manual winding, conceived by F.P.Journe, is as usual entirely made in our Manufacture and assembled by one of our watchmakers. F.P.Journe perpetuates the watchmaking tradition and maintains exclusive craftsmanship since every experienced watchmaker performs all the assembly stages from beginning to end, a unique case in the profession.
Inspired by the Chronograph made for Only Watch 2017, this new movement features a chronograph direct gearing with a rocking pinion avoiding the jump of the hand at the start. An important development was required to integrate the very large date in a total height of only 6.80 mm, signature of the F.P.Journe brand.
The magnificent finishing and decorations of the movement visible through a transparent sapphire back are one of the numerous undisputable qualities of the F.P.Journe Haute Horology.

Technical description
The calibre 1518 with manual winding, conceived by F.P.Journe, is as usual entirely made in our Manufacture and assembled by one of our watchmakers. F.P.Journe perpetuates the watchmaking tradition and maintains exclusive craftsmanship since every experienced watchmaker performs all the assembly stages from beginning to end, a unique case in the profession.
Inspired by the Chronograph made for Only Watch 2017, this new movement features a chronograph direct gearing with a rocking pinion avoiding the jump of the hand at the start. An important development was required to integrate the very large date in a total height of only 6.80 mm, signature of the F.P.Journe brand.
The magnificent finishing and decorations of the movement visible through a transparent sapphire back are one of the numerous undisputable qualities of the F.P.Journe Haute Horology.
Diameter: 44 mm
Overall height: 12.1 mm
Dial: blackened guilloché Silver dial, matte 5N Gold appliqué numerals, counters in whitened guilloché Silver
Hands: matte 5N gilt Steel, ivory coloured Steel and blued Steel

Diameter: 44 mm
Overall height: 12.1 mm
Dial: blackened guilloché Silver dial, matte 5N Gold appliqué numerals, counters in whitened guilloché Silver
Hands: matte 5N gilt Steel, ivory coloured Steel and blued Steel
Technical Specifications
In 18K rose Gold
Mechanical with manual winding
38 turns of crown
Movement without dial: 285
Cased up with strap: 453
Jewels: 29
Overall diameter: 33.60 mm
Casing-up diameter: 33.20 mm
Overall height: 6.80 mm
Height of hands: 2.20 mm
Diameter of stem thread: S1.20 mm
In-line lever escapement, 15-tooth escape wheel
Chronometric with four adjustable inertia weights
Anachron balance spring
Mobile stud holders
Free-sprung balance
Nivatronic laser-welded to collet
Pinned GE stud
Frequency: 21,600 v/h (3Hz)
Inertia: 10.10 mg*cm2
Angle of lift: 52°
Crown with 3 positions
Position 1: winding
Position 2: correction of the date
Position 3: time setting
Pusher chronograph to start, stop and back to zero at 2h
Pusher split-second at 4h
0h dial up: 300°
24h dial up: 260°
80 ± 2 hours without the chronograph
Circular stripes on the bridges, circular graining on the baseplate, polished screw heads with chamfered slots, pegs with polished rounded ends, straight-grained steel work
In 18K rose Gold
Mechanical with manual winding
38 turns of crown
Movement without dial: 285
Cased up with strap: 453
Jewels: 29
Overall diameter: 33.60 mm
Casing-up diameter: 33.20 mm
Overall height: 6.80 mm
Height of hands: 2.20 mm
Diameter of stem thread: S1.20 mm
In-line lever escapement, 15-tooth escape wheel
Chronometric with four adjustable inertia weights
Anachron balance spring
Mobile stud holders
Free-sprung balance
Nivatronic laser-welded to collet
Pinned GE stud
Frequency: 21,600 v/h (3Hz)
Inertia: 10.10 mg*cm2
Angle of lift: 52°
Crown with 3 positions
Position 1: winding
Position 2: correction of the date
Position 3: time setting
Pusher chronograph to start, stop and back to zero at 2h
Pusher split-second at 4h
0h dial up: 300°
24h dial up: 260°
80 ± 2 hours without the chronograph
Circular stripes on the bridges, circular graining on the baseplate, polished screw heads with chamfered slots, pegs with polished rounded ends, straight-grained steel work
Technical description
The calibre 1518 with manual winding, conceived by F.P.Journe, is as usual entirely made in our Manufacture and assembled by one of our watchmakers. F.P.Journe perpetuates the watchmaking tradition and maintains exclusive craftsmanship since every experienced watchmaker performs all the assembly stages from beginning to end, a unique case in the profession.
Inspired by the Chronograph made for Only Watch 2017, this new movement features a chronograph direct gearing with a rocking pinion avoiding the jump of the hand at the start. An important development was required to integrate the very large date in a total height of only 6.80 mm, signature of the F.P.Journe brand.
The magnificent finishing and decorations of the movement visible through a transparent sapphire back are one of the numerous undisputable qualities of the F.P.Journe Haute Horology.

Technical description
The calibre 1518 with manual winding, conceived by F.P.Journe, is as usual entirely made in our Manufacture and assembled by one of our watchmakers. F.P.Journe perpetuates the watchmaking tradition and maintains exclusive craftsmanship since every experienced watchmaker performs all the assembly stages from beginning to end, a unique case in the profession.
Inspired by the Chronograph made for Only Watch 2017, this new movement features a chronograph direct gearing with a rocking pinion avoiding the jump of the hand at the start. An important development was required to integrate the very large date in a total height of only 6.80 mm, signature of the F.P.Journe brand.
The magnificent finishing and decorations of the movement visible through a transparent sapphire back are one of the numerous undisputable qualities of the F.P.Journe Haute Horology.
About
THE 18K 6N GOLD CASE OF 44 MM DIAMETER AND 12.1 MM THICK ENCLOSES THE MONOPOUSSOIR SPLIT SECOND CHRONOGRAPH MOVEMENT WITH A VERY LARGE DATE, MADE IN 18K ROSE GOLD.
THIS CHRONOGRAPH FEATURES A POWER RESERVE OF 80 HOURS MAKING IT POSSIBLE TO EFFICIENTLY USE THE CHRONOGRAPH WITH THE RATTRAPANTE FUNCTION AFTER 2 DAYS AND A VERY LARGE DATE IN A WINDOW OF 5.20 X 2.80 MM PROVIDES AN INCREASED READABILITY. THE TACHYMETRIC BEZEL INLAID WITH CERAMIC AND THE NEW TYPOGRAPHIC NUMERAL ARE A REMINDER OF THE 2017 ONLY WATCH TIMEPIECE.
THIS TIMEPIECE HAS A BLACKENED SILVER GUILLOCHE DIAL, APPLIQUES NUMERALS IN MATTE 5N GOLD, 2 SILVER CHRONOGRAPH COUNTERS AND MATTE 5N GOLDEN HANDS. THE 18K 6N GOLD BRACELET HAS A MATTE HAMMERED FINISHING. THE LINKS ATTACHED TO THE CASE ARE ALSO ARTICULATED TO ADAPT TO THE DIFFERENT WRIST SIZES WITH AN ADJUSTABLE FOLDING CLASP IN LENGTH OF APPROXIMATELY 5 MM.
A CROWN WITH 3 POSITIONS:
- POSITION 1: WINDING.
- POSITION 2: CORRECTION OF THE VERY LARGE DATE.
- POSITION 3: TIME SETTING.
THE PUSHER ARE MADE IN THE SAME METAL AS THE CASE:
- A PUSHER AT 2H FOR THE CHRONOGRAPH START, STOP AND BACK TO ZERO FUNCTIONS.
- A PUSHER AT 4H FOR THE RATTRAPANTE.
THIS CALIBRE 1518 WITH MANUAL WINDING, CONCEIVED BY F.P.JOURNE, IS AS USUAL ENTIRELY MADE IN OUR MANUFACTURE AND ASSEMBLED BY ONE OF OUR WATCHMAKERS. F.P.JOURNE PERPETUATES THE WATCHMAKING TRADITION AND MAINTAINS EXCLUSIVE CRAFTSMANSHIP SINCE EVERY EXPERIENCED WATCHMAKER PERFORMS ALL THE ASSEMBLY STAGES FROM BEGINNING TO END, A UNIQUE CASE IN THE PROFESSION.
INSPIRED BY THE CHRONOGRAPH MADE FOR ONLY WATCH 2017, THIS NEW MOVEMENT FEATURES A CHRONOGRAPH DIRECT GEARING WITH A ROCKING PINION AVOIDING THE JUMP OF THE HAND AT THE START. AN IMPORTANT DEVELOPMENT WAS REQUIRED TO INTEGRATE THE VERY LARGE DATE IN A TOTAL HEIGHT OF ONLY 6.80 MM, SIGNATURE OF THE F.P.JOURNE BRAND. THE MAGNIFICENT FINISHING AND DECORATIONS OF THE MOVEMENT VISIBLE THROUGH A TRANSPARENT SAPPHIRE BACK ARE ONE OF THE NUMEROUS UNDISPUTABLE QUALITIES OF THE F.P.JOURNE HAUTE HOROLOGY.
Technical Specifications
In 18K rose Gold
Mechanical with manual winding
38 turns of crown
Movement without dial: 285
Cased up with strap: 453
Jewels: 29
Overall diameter: 33.60 mm
Casing-up diameter: 33.20 mm
Overall height: 6.80 mm
Height of hands: 2.20 mm
Diameter of stem thread: S1.20 mm
In-line lever escapement, 15-tooth escape wheel
Chronometric with four adjustable inertia weights
Anachron balance spring
Mobile stud holders
Free-sprung balance
Nivatronic laser-welded to collet
Pinned GE stud
Frequency: 21,600 v/h (3Hz)
Inertia: 10.10 mg*cm2
Angle of lift: 52°
Crown with 3 positions
Position 1: winding
Position 2: correction of the date
Position 3: time setting
Pusher chronograph to start, stop and back to zero at 2h
Pusher split-second at 4h
0h dial up: 300°
24h dial up: 260°
80 ± 2 hours without the chronograph
Circular stripes on the bridges, circular graining on the baseplate, polished screw heads with chamfered slots, pegs with polished rounded ends, straight-grained steel work
In 18K rose Gold
Mechanical with manual winding
38 turns of crown
Movement without dial: 285
Cased up with strap: 453
Jewels: 29
Overall diameter: 33.60 mm
Casing-up diameter: 33.20 mm
Overall height: 6.80 mm
Height of hands: 2.20 mm
Diameter of stem thread: S1.20 mm
In-line lever escapement, 15-tooth escape wheel
Chronometric with four adjustable inertia weights
Anachron balance spring
Mobile stud holders
Free-sprung balance
Nivatronic laser-welded to collet
Pinned GE stud
Frequency: 21,600 v/h (3Hz)
Inertia: 10.10 mg*cm2
Angle of lift: 52°
Crown with 3 positions
Position 1: winding
Position 2: correction of the date
Position 3: time setting
Pusher chronograph to start, stop and back to zero at 2h
Pusher split-second at 4h
0h dial up: 300°
24h dial up: 260°
80 ± 2 hours without the chronograph
Circular stripes on the bridges, circular graining on the baseplate, polished screw heads with chamfered slots, pegs with polished rounded ends, straight-grained steel work
Technical description
The calibre 1518 with manual winding, conceived by F.P.Journe, is as usual entirely made in our Manufacture and assembled by one of our watchmakers. F.P.Journe perpetuates the watchmaking tradition and maintains exclusive craftsmanship since every experienced watchmaker performs all the assembly stages from beginning to end, a unique case in the profession.
Inspired by the Chronograph made for Only Watch 2017, this new movement features a chronograph direct gearing with a rocking pinion avoiding the jump of the hand at the start. An important development was required to integrate the very large date in a total height of only 6.80 mm, signature of the F.P.Journe brand.
The magnificent finishing and decorations of the movement visible through a transparent sapphire back are one of the numerous undisputable qualities of the F.P.Journe Haute Horology.

Technical description
The calibre 1518 with manual winding, conceived by F.P.Journe, is as usual entirely made in our Manufacture and assembled by one of our watchmakers. F.P.Journe perpetuates the watchmaking tradition and maintains exclusive craftsmanship since every experienced watchmaker performs all the assembly stages from beginning to end, a unique case in the profession.
Inspired by the Chronograph made for Only Watch 2017, this new movement features a chronograph direct gearing with a rocking pinion avoiding the jump of the hand at the start. An important development was required to integrate the very large date in a total height of only 6.80 mm, signature of the F.P.Journe brand.
The magnificent finishing and decorations of the movement visible through a transparent sapphire back are one of the numerous undisputable qualities of the F.P.Journe Haute Horology.
-
About
THE BOUTIQUE EDITION COLLECTION BROADENS WITH THE CHRONOGRAPHE RATTRAPANTE. THE BOUTIQUE EDITION WITH BLACK DIAL ON 18K 6N GOLD CASE IS AVAILABLE ONLY IN THE F.P.JOURNE BOUTIQUES AND ESPACES.
THE 18K 6N GOLD CASE OF 44 MM DIAMETER AND 12.1 MM THICK ENCLOSES THE MONOPOUSSOIR SPLIT SECOND CHRONOGRAPH MOVEMENT WITH A VERY LARGE DATE, MADE IN 18K ROSE GOLD.
THIS CHRONOGRAPH FEATURES A POWER RESERVE OF 80 HOURS MAKING IT POSSIBLE TO EFFICIENTLY USE THE CHRONOGRAPH WITH THE RATTRAPANTE FUNCTION AFTER 2 DAYS AND A VERY LARGE DATE IN A WINDOW OF 5.20 X 2.80 MM PROVIDES AN INCREASED READABILITY. THE TACHYMETRIC BEZEL INLAID WITH CERAMIC AND THE NEW TYPOGRAPHIC NUMERAL ARE A REMINDER OF THE 2017 ONLY WATCH TIMEPIECE.
THIS TIMEPIECE HAS A BLACKENED SILVER GUILLOCHE DIAL, APPLIQUES NUMERALS IN MATTE 5N GOLD, 2 SILVER CHRONOGRAPH COUNTERS AND MATTE 5N GOLDEN HANDS. THE 18K 6N GOLD BRACELET HAS A MATTE HAMMERED FINISHING. THE LINKS ATTACHED TO THE CASE ARE ALSO ARTICULATED TO ADAPT TO THE DIFFERENT WRIST SIZES WITH AN ADJUSTABLE FOLDING CLASP IN LENGTH OF APPROXIMATELY 5 MM.
A CROWN WITH 3 POSITIONS:
- POSITION 1: WINDING.
- POSITION 2: CORRECTION OF THE VERY LARGE DATE.
- POSITION 3: TIME SETTING.
THE PUSHER ARE MADE IN THE SAME METAL AS THE CASE:
- A PUSHER AT 2H FOR THE CHRONOGRAPH START, STOP AND BACK TO ZERO FUNCTIONS.
- A PUSHER AT 4H FOR THE RATTRAPANTE.
THIS CALIBRE 1518 WITH MANUAL WINDING, CONCEIVED BY F.P.JOURNE, IS AS USUAL ENTIRELY MADE IN OUR MANUFACTURE AND ASSEMBLED BY ONE OF OUR WATCHMAKERS. F.P.JOURNE PERPETUATES THE WATCHMAKING TRADITION AND MAINTAINS EXCLUSIVE CRAFTSMANSHIP SINCE EVERY EXPERIENCED WATCHMAKER PERFORMS ALL THE ASSEMBLY STAGES FROM BEGINNING TO END, A UNIQUE CASE IN THE PROFESSION.
INSPIRED BY THE CHRONOGRAPH MADE FOR ONLY WATCH 2017, THIS NEW MOVEMENT FEATURES A CHRONOGRAPH DIRECT GEARING WITH A ROCKING PINION AVOIDING THE JUMP OF THE HAND AT THE START. AN IMPORTANT DEVELOPMENT WAS REQUIRED TO INTEGRATE THE VERY LARGE DATE IN A TOTAL HEIGHT OF ONLY 6.80 MM, SIGNATURE OF THE F.P.JOURNE BRAND. THE MAGNIFICENT FINISHING AND DECORATIONS OF THE MOVEMENT VISIBLE THROUGH A TRANSPARENT SAPPHIRE BACK ARE ONE OF THE NUMEROUS UNDISPUTABLE QUALITIES OF THE F.P.JOURNE HAUTE HOROLOGY. -
Technical description
Technical Specifications
Movement :In 18K rose Gold
Mechanical with manual winding
38 turns of crownNumber of Parts :Movement without dial: 285
Cased up with strap: 453
Jewels: 29Dimensions of the Movement :Overall diameter: 33.60 mm
Casing-up diameter: 33.20 mm
Overall height: 6.80 mm
Height of hands: 2.20 mm
Diameter of stem thread: S1.20 mmBalance :In-line lever escapement, 15-tooth escape wheel
Chronometric with four adjustable inertia weights
Anachron balance spring
Mobile stud holders
Free-sprung balance
Nivatronic laser-welded to collet
Pinned GE stud
Frequency: 21,600 v/h (3Hz)
Inertia: 10.10 mg*cm2
Angle of lift: 52°Main Characteristics :Crown with 3 positions
Position 1: winding
Position 2: correction of the date
Position 3: time setting
Pusher chronograph to start, stop and back to zero at 2h
Pusher split-second at 4hAmplitude :0h dial up: 300°
24h dial up: 260°Power reserve :80 ± 2 hours without the chronograph
Finishing :Circular stripes on the bridges, circular graining on the baseplate, polished screw heads with chamfered slots, pegs with polished rounded ends, straight-grained steel work
Movement :In 18K rose Gold
Mechanical with manual winding
38 turns of crownNumber of Parts :Movement without dial: 285
Cased up with strap: 453
Jewels: 29Dimensions of the Movement :Overall diameter: 33.60 mm
Casing-up diameter: 33.20 mm
Overall height: 6.80 mm
Height of hands: 2.20 mm
Diameter of stem thread: S1.20 mmBalance :In-line lever escapement, 15-tooth escape wheel
Chronometric with four adjustable inertia weights
Anachron balance spring
Mobile stud holders
Free-sprung balance
Nivatronic laser-welded to collet
Pinned GE stud
Frequency: 21,600 v/h (3Hz)
Inertia: 10.10 mg*cm2
Angle of lift: 52°Main Characteristics :Crown with 3 positions
Position 1: winding
Position 2: correction of the date
Position 3: time setting
Pusher chronograph to start, stop and back to zero at 2h
Pusher split-second at 4hAmplitude :0h dial up: 300°
24h dial up: 260°Power reserve :80 ± 2 hours without the chronograph
Finishing :Circular stripes on the bridges, circular graining on the baseplate, polished screw heads with chamfered slots, pegs with polished rounded ends, straight-grained steel work
At the heart of the movementAt the heart of the movementTechnical description
The calibre 1518 with manual winding, conceived by F.P.Journe, is as usual entirely made in our Manufacture and assembled by one of our watchmakers. F.P.Journe perpetuates the watchmaking tradition and maintains exclusive craftsmanship since every experienced watchmaker performs all the assembly stages from beginning to end, a unique case in the profession.
Inspired by the Chronograph made for Only Watch 2017, this new movement features a chronograph direct gearing with a rocking pinion avoiding the jump of the hand at the start. An important development was required to integrate the very large date in a total height of only 6.80 mm, signature of the F.P.Journe brand.
The magnificent finishing and decorations of the movement visible through a transparent sapphire back are one of the numerous undisputable qualities of the F.P.Journe Haute Horology.Technical description
The calibre 1518 with manual winding, conceived by F.P.Journe, is as usual entirely made in our Manufacture and assembled by one of our watchmakers. F.P.Journe perpetuates the watchmaking tradition and maintains exclusive craftsmanship since every experienced watchmaker performs all the assembly stages from beginning to end, a unique case in the profession.
Inspired by the Chronograph made for Only Watch 2017, this new movement features a chronograph direct gearing with a rocking pinion avoiding the jump of the hand at the start. An important development was required to integrate the very large date in a total height of only 6.80 mm, signature of the F.P.Journe brand.
The magnificent finishing and decorations of the movement visible through a transparent sapphire back are one of the numerous undisputable qualities of the F.P.Journe Haute Horology.
Technical Specifications
In 18K rose Gold
Mechanical with manual winding
38 turns of crown
Movement without dial: 285
Cased up with strap: 453
Jewels: 29
Overall diameter: 33.60 mm
Casing-up diameter: 33.20 mm
Overall height: 6.80 mm
Height of hands: 2.20 mm
Diameter of stem thread: S1.20 mm
In-line lever escapement, 15-tooth escape wheel
Chronometric with four adjustable inertia weights
Anachron balance spring
Mobile stud holders
Free-sprung balance
Nivatronic laser-welded to collet
Pinned GE stud
Frequency: 21,600 v/h (3Hz)
Inertia: 10.10 mg*cm2
Angle of lift: 52°
Crown with 3 positions
Position 1: winding
Position 2: correction of the date
Position 3: time setting
Pusher chronograph to start, stop and back to zero at 2h
Pusher split-second at 4h
0h dial up: 300°
24h dial up: 260°
80 ± 2 hours without the chronograph
Circular stripes on the bridges, circular graining on the baseplate, polished screw heads with chamfered slots, pegs with polished rounded ends, straight-grained steel work
In 18K rose Gold
Mechanical with manual winding
38 turns of crown
Movement without dial: 285
Cased up with strap: 453
Jewels: 29
Overall diameter: 33.60 mm
Casing-up diameter: 33.20 mm
Overall height: 6.80 mm
Height of hands: 2.20 mm
Diameter of stem thread: S1.20 mm
In-line lever escapement, 15-tooth escape wheel
Chronometric with four adjustable inertia weights
Anachron balance spring
Mobile stud holders
Free-sprung balance
Nivatronic laser-welded to collet
Pinned GE stud
Frequency: 21,600 v/h (3Hz)
Inertia: 10.10 mg*cm2
Angle of lift: 52°
Crown with 3 positions
Position 1: winding
Position 2: correction of the date
Position 3: time setting
Pusher chronograph to start, stop and back to zero at 2h
Pusher split-second at 4h
0h dial up: 300°
24h dial up: 260°
80 ± 2 hours without the chronograph
Circular stripes on the bridges, circular graining on the baseplate, polished screw heads with chamfered slots, pegs with polished rounded ends, straight-grained steel work
Technical description
The calibre 1518 with manual winding, conceived by F.P.Journe, is as usual entirely made in our Manufacture and assembled by one of our watchmakers. F.P.Journe perpetuates the watchmaking tradition and maintains exclusive craftsmanship since every experienced watchmaker performs all the assembly stages from beginning to end, a unique case in the profession.
Inspired by the Chronograph made for Only Watch 2017, this new movement features a chronograph direct gearing with a rocking pinion avoiding the jump of the hand at the start. An important development was required to integrate the very large date in a total height of only 6.80 mm, signature of the F.P.Journe brand.
The magnificent finishing and decorations of the movement visible through a transparent sapphire back are one of the numerous undisputable qualities of the F.P.Journe Haute Horology.

Technical description
The calibre 1518 with manual winding, conceived by F.P.Journe, is as usual entirely made in our Manufacture and assembled by one of our watchmakers. F.P.Journe perpetuates the watchmaking tradition and maintains exclusive craftsmanship since every experienced watchmaker performs all the assembly stages from beginning to end, a unique case in the profession.
Inspired by the Chronograph made for Only Watch 2017, this new movement features a chronograph direct gearing with a rocking pinion avoiding the jump of the hand at the start. An important development was required to integrate the very large date in a total height of only 6.80 mm, signature of the F.P.Journe brand.
The magnificent finishing and decorations of the movement visible through a transparent sapphire back are one of the numerous undisputable qualities of the F.P.Journe Haute Horology.