Calibre 1522 https://www.fpjourne.com/en/collection/only-watch-timepieces/chronometre-furtif-bleu-only-watch-2024 FP Journe https://www.fpjourne.com/en FP Journe
Diameter: 42 mm
Overall height: 9.50 mm
Dial: Translucent blue Grand Feu enamel with laser-engraved matt numerals and track
Back: moon phase at 6h and power reserve at 12h
Hands: matt blue Steel and orange coloured Steel
Only Watch is a foundation created in 2005, raising funds for research on Duchenne Muscular Dystrophy (DMD) by auctioning unique timepieces.
Technical Specifications
Manual winding, 38 turns of the crown
18K rose Gold
- Overall diameter : 33.50 mm
- Overall height : 5.90 mm
- Height of winding system : 2.20 mm
- Diameter of stem thread : S0.90 mm
Balance with 4 inertia weights
Flat Anachron microflamed spring
Mobile stud holder
Free-sprung balance
Nivatronic laser-welded to the collet
Pinned GE stud
Frequency: 21600 V/H, 3 Hz
Inertia: 10.10mg*cm2
Angle of lift: 52°
- 12 h dial up : 320°
- 24 h dial up : 280°
Time setting in position 3 and moon in position 2 of the crown
Linear lever escapement 15 teeth
Dial: hours, minutes and seconds in the center
Back: moon phase at 6 h and power reserve at 12 h
Translucent blue Grand Feu enamel with laser-engraved matt numerals and track
Matt blue hour and minute hands
Orange seconds hand
56 +/- 2 hours
Baseplate partly circular grained
Steelwork with polished chamfers
Polished screw heads with chamfered slots
Pegs with polished rounded ends
Diameter: 42 mm
Total height: 9.50 mm
Finishing: Sand-blasted case, polished and sand-blasted bezel, polished caseband decoration, polished chamfers
3-row flat-link
Finish: sand-blasted with polished chamfers
- Movement without dial : 197
- Cased up on bracelet : 422
- Jewels : 21
Manual winding, 38 turns of the crown
18K rose Gold
- Overall diameter : 33.50 mm
- Overall height : 5.90 mm
- Height of winding system : 2.20 mm
- Diameter of stem thread : S0.90 mm
Balance with 4 inertia weights
Flat Anachron microflamed spring
Mobile stud holder
Free-sprung balance
Nivatronic laser-welded to the collet
Pinned GE stud
Frequency: 21600 V/H, 3 Hz
Inertia: 10.10mg*cm2
Angle of lift: 52°
- 12 h dial up : 320°
- 24 h dial up : 280°
Time setting in position 3 and moon in position 2 of the crown
Linear lever escapement 15 teeth
Dial: hours, minutes and seconds in the center
Back: moon phase at 6 h and power reserve at 12 h
Translucent blue Grand Feu enamel with laser-engraved matt numerals and track
Matt blue hour and minute hands
Orange seconds hand
56 +/- 2 hours
Baseplate partly circular grained
Steelwork with polished chamfers
Polished screw heads with chamfered slots
Pegs with polished rounded ends
Diameter: 42 mm
Total height: 9.50 mm
Finishing: Sand-blasted case, polished and sand-blasted bezel, polished caseband decoration, polished chamfers
3-row flat-link
Finish: sand-blasted with polished chamfers
- Movement without dial : 197
- Cased up on bracelet : 422
- Jewels : 21
Technical description
Technical description
Diameter: 42 mm
Overall height: 9.50 mm
Dial: Translucent blue Grand Feu enamel with laser-engraved matt numerals and track
Back: moon phase at 6h and power reserve at 12h
Hands: matt blue Steel and orange coloured Steel
Only Watch is a foundation created in 2005, raising funds for research on Duchenne Muscular Dystrophy (DMD) by auctioning unique timepieces.
Diameter: 42 mm
Overall height: 9.50 mm
Dial: Translucent blue Grand Feu enamel with laser-engraved matt numerals and track
Back: moon phase at 6h and power reserve at 12h
Hands: matt blue Steel and orange coloured Steel
Only Watch is a foundation created in 2005, raising funds for research on Duchenne Muscular Dystrophy (DMD) by auctioning unique timepieces.
Technical Specifications
Manual winding, 38 turns of the crown
18K rose Gold
- Overall diameter : 33.50 mm
- Overall height : 5.90 mm
- Height of winding system : 2.20 mm
- Diameter of stem thread : S0.90 mm
Balance with 4 inertia weights
Flat Anachron microflamed spring
Mobile stud holder
Free-sprung balance
Nivatronic laser-welded to the collet
Pinned GE stud
Frequency: 21600 V/H, 3 Hz
Inertia: 10.10mg*cm2
Angle of lift: 52°
- 12 h dial up : 320°
- 24 h dial up : 280°
Time setting in position 3 and moon in position 2 of the crown
Linear lever escapement 15 teeth
Dial: hours, minutes and seconds in the center
Back: moon phase at 6 h and power reserve at 12 h
Translucent blue Grand Feu enamel with laser-engraved matt numerals and track
Matt blue hour and minute hands
Orange seconds hand
56 +/- 2 hours
Baseplate partly circular grained
Steelwork with polished chamfers
Polished screw heads with chamfered slots
Pegs with polished rounded ends
Diameter: 42 mm
Total height: 9.50 mm
Finishing: Sand-blasted case, polished and sand-blasted bezel, polished caseband decoration, polished chamfers
3-row flat-link
Finish: sand-blasted with polished chamfers
- Movement without dial : 197
- Cased up on bracelet : 422
- Jewels : 21
Manual winding, 38 turns of the crown
18K rose Gold
- Overall diameter : 33.50 mm
- Overall height : 5.90 mm
- Height of winding system : 2.20 mm
- Diameter of stem thread : S0.90 mm
Balance with 4 inertia weights
Flat Anachron microflamed spring
Mobile stud holder
Free-sprung balance
Nivatronic laser-welded to the collet
Pinned GE stud
Frequency: 21600 V/H, 3 Hz
Inertia: 10.10mg*cm2
Angle of lift: 52°
- 12 h dial up : 320°
- 24 h dial up : 280°
Time setting in position 3 and moon in position 2 of the crown
Linear lever escapement 15 teeth
Dial: hours, minutes and seconds in the center
Back: moon phase at 6 h and power reserve at 12 h
Translucent blue Grand Feu enamel with laser-engraved matt numerals and track
Matt blue hour and minute hands
Orange seconds hand
56 +/- 2 hours
Baseplate partly circular grained
Steelwork with polished chamfers
Polished screw heads with chamfered slots
Pegs with polished rounded ends
Diameter: 42 mm
Total height: 9.50 mm
Finishing: Sand-blasted case, polished and sand-blasted bezel, polished caseband decoration, polished chamfers
3-row flat-link
Finish: sand-blasted with polished chamfers
- Movement without dial : 197
- Cased up on bracelet : 422
- Jewels : 21
Technical description
Technical description
Calibre 1522 https://www.fpjourne.com/en/collection/only-watch-timepieces/chronometre-furtif-bleu-only-watch-2024 FP Journe https://www.fpjourne.com/en FP Journe
About
A world premiere, a complete Tantalum case and bracelet dress this unique watch made especially for Only Watch, with an 18K rose Gold movement.
The Chronomètre Furtif takes its name from the difficulty of reading the time if the watch is not facing you, as the blue enamel dial reveals the frosted numerals only in the reflection of light. In addition, the moon phase and power reserve (56 h) indications are integrated into the movement and visible only on the back. It is therefore a watch whose indications can be enjoyed only by its owner.
At the heart of this watch is a new hand-wound mechanical movement, Calibre 1522 in 18K rose Gold with direct central seconds, a first for F.P.Journe.
Technical Specifications
Manual winding, 38 turns of the crown
18K rose Gold
- Overall diameter : 33.50 mm
- Overall height : 5.90 mm
- Height of winding system : 2.20 mm
- Diameter of stem thread : S0.90 mm
Balance with 4 inertia weights
Flat Anachron microflamed spring
Mobile stud holder
Free-sprung balance
Nivatronic laser-welded to the collet
Pinned GE stud
Frequency: 21600 V/H, 3 Hz
Inertia: 10.10mg*cm2
Angle of lift: 52°
- 12 h dial up : 320°
- 24 h dial up : 280°
Time setting in position 3 and moon in position 2 of the crown
Linear lever escapement 15 teeth
Dial: hours, minutes and seconds in the center
Back: moon phase at 6 h and power reserve at 12 h
Translucent blue Grand Feu enamel with laser-engraved matt numerals and track
Matt blue hour and minute hands
Orange seconds hand
56 +/- 2 hours
Baseplate partly circular grained
Steelwork with polished chamfers
Polished screw heads with chamfered slots
Pegs with polished rounded ends
Diameter: 42 mm
Total height: 9.50 mm
Finishing: Sand-blasted case, polished and sand-blasted bezel, polished caseband decoration, polished chamfers
3-row flat-link
Finish: sand-blasted with polished chamfers
- Movement without dial : 197
- Cased up on bracelet : 422
- Jewels : 21
Manual winding, 38 turns of the crown
18K rose Gold
- Overall diameter : 33.50 mm
- Overall height : 5.90 mm
- Height of winding system : 2.20 mm
- Diameter of stem thread : S0.90 mm
Balance with 4 inertia weights
Flat Anachron microflamed spring
Mobile stud holder
Free-sprung balance
Nivatronic laser-welded to the collet
Pinned GE stud
Frequency: 21600 V/H, 3 Hz
Inertia: 10.10mg*cm2
Angle of lift: 52°
- 12 h dial up : 320°
- 24 h dial up : 280°
Time setting in position 3 and moon in position 2 of the crown
Linear lever escapement 15 teeth
Dial: hours, minutes and seconds in the center
Back: moon phase at 6 h and power reserve at 12 h
Translucent blue Grand Feu enamel with laser-engraved matt numerals and track
Matt blue hour and minute hands
Orange seconds hand
56 +/- 2 hours
Baseplate partly circular grained
Steelwork with polished chamfers
Polished screw heads with chamfered slots
Pegs with polished rounded ends
Diameter: 42 mm
Total height: 9.50 mm
Finishing: Sand-blasted case, polished and sand-blasted bezel, polished caseband decoration, polished chamfers
3-row flat-link
Finish: sand-blasted with polished chamfers
- Movement without dial : 197
- Cased up on bracelet : 422
- Jewels : 21
Technical description
Technical description
-
About
For its fifth participation in Only Watch, F.P.Journe presents a unique model designed exclusively for the occasion, the Chronomètre Furtif Bleu.
A world premiere, a complete Tantalum case and bracelet dress this unique watch made especially for Only Watch, with an 18K rose Gold movement.
The Chronomètre Furtif takes its name from the difficulty of reading the time if the watch is not facing you, as the blue enamel dial reveals the frosted numerals only in the reflection of light. In addition, the moon phase and power reserve (56 h) indications are integrated into the movement and visible only on the back. It is therefore a watch whose indications can be enjoyed only by its owner.
At the heart of this watch is a new hand-wound mechanical movement, Calibre 1522 in 18K rose Gold with direct central seconds, a first for F.P.Journe. -
Technical description
Technical Specifications
Movement :Manual winding, 38 turns of the crown
18K rose GoldDimensions of the movement :- Overall diameter : 33.50 mm
- Overall height : 5.90 mm
- Height of winding system : 2.20 mm
- Diameter of stem thread : S0.90 mm
Balance :Balance with 4 inertia weights
Flat Anachron microflamed spring
Mobile stud holder
Free-sprung balance
Nivatronic laser-welded to the collet
Pinned GE stud
Frequency: 21600 V/H, 3 Hz
Inertia: 10.10mg*cm2
Angle of lift: 52°Amplitude :- 12 h dial up : 320°
- 24 h dial up : 280°
Main Characteristics :Time setting in position 3 and moon in position 2 of the crown
Escapement :Linear lever escapement 15 teeth
Indications :Dial: hours, minutes and seconds in the center
Back: moon phase at 6 h and power reserve at 12 hDial :Translucent blue Grand Feu enamel with laser-engraved matt numerals and track
Matt blue hour and minute hands
Orange seconds handAutonomy :56 +/- 2 hours
Finishing :Baseplate partly circular grained
Steelwork with polished chamfers
Polished screw heads with chamfered slots
Pegs with polished rounded endsCase :Diameter: 42 mm
Total height: 9.50 mm
Finishing: Sand-blasted case, polished and sand-blasted bezel, polished caseband decoration, polished chamfersBracelet :3-row flat-link
Finish: sand-blasted with polished chamfersNumber of parts :- Movement without dial : 197
- Cased up on bracelet : 422
- Jewels : 21
Movement :Manual winding, 38 turns of the crown
18K rose GoldDimensions of the movement :- Overall diameter : 33.50 mm
- Overall height : 5.90 mm
- Height of winding system : 2.20 mm
- Diameter of stem thread : S0.90 mm
Balance :Balance with 4 inertia weights
Flat Anachron microflamed spring
Mobile stud holder
Free-sprung balance
Nivatronic laser-welded to the collet
Pinned GE stud
Frequency: 21600 V/H, 3 Hz
Inertia: 10.10mg*cm2
Angle of lift: 52°Amplitude :- 12 h dial up : 320°
- 24 h dial up : 280°
Main Characteristics :Time setting in position 3 and moon in position 2 of the crown
Escapement :Linear lever escapement 15 teeth
Indications :Dial: hours, minutes and seconds in the center
Back: moon phase at 6 h and power reserve at 12 hDial :Translucent blue Grand Feu enamel with laser-engraved matt numerals and track
Matt blue hour and minute hands
Orange seconds handAutonomy :56 +/- 2 hours
Finishing :Baseplate partly circular grained
Steelwork with polished chamfers
Polished screw heads with chamfered slots
Pegs with polished rounded endsCase :Diameter: 42 mm
Total height: 9.50 mm
Finishing: Sand-blasted case, polished and sand-blasted bezel, polished caseband decoration, polished chamfersBracelet :3-row flat-link
Finish: sand-blasted with polished chamfersNumber of parts :- Movement without dial : 197
- Cased up on bracelet : 422
- Jewels : 21
At the heart of the movementAt the heart of the movement![fpjourne]()
Technical description
Technical description
Technical Specifications
Manual winding, 38 turns of the crown
18K rose Gold
- Overall diameter : 33.50 mm
- Overall height : 5.90 mm
- Height of winding system : 2.20 mm
- Diameter of stem thread : S0.90 mm
Balance with 4 inertia weights
Flat Anachron microflamed spring
Mobile stud holder
Free-sprung balance
Nivatronic laser-welded to the collet
Pinned GE stud
Frequency: 21600 V/H, 3 Hz
Inertia: 10.10mg*cm2
Angle of lift: 52°
- 12 h dial up : 320°
- 24 h dial up : 280°
Time setting in position 3 and moon in position 2 of the crown
Linear lever escapement 15 teeth
Dial: hours, minutes and seconds in the center
Back: moon phase at 6 h and power reserve at 12 h
Translucent blue Grand Feu enamel with laser-engraved matt numerals and track
Matt blue hour and minute hands
Orange seconds hand
56 +/- 2 hours
Baseplate partly circular grained
Steelwork with polished chamfers
Polished screw heads with chamfered slots
Pegs with polished rounded ends
Diameter: 42 mm
Total height: 9.50 mm
Finishing: Sand-blasted case, polished and sand-blasted bezel, polished caseband decoration, polished chamfers
3-row flat-link
Finish: sand-blasted with polished chamfers
- Movement without dial : 197
- Cased up on bracelet : 422
- Jewels : 21
Manual winding, 38 turns of the crown
18K rose Gold
- Overall diameter : 33.50 mm
- Overall height : 5.90 mm
- Height of winding system : 2.20 mm
- Diameter of stem thread : S0.90 mm
Balance with 4 inertia weights
Flat Anachron microflamed spring
Mobile stud holder
Free-sprung balance
Nivatronic laser-welded to the collet
Pinned GE stud
Frequency: 21600 V/H, 3 Hz
Inertia: 10.10mg*cm2
Angle of lift: 52°
- 12 h dial up : 320°
- 24 h dial up : 280°
Time setting in position 3 and moon in position 2 of the crown
Linear lever escapement 15 teeth
Dial: hours, minutes and seconds in the center
Back: moon phase at 6 h and power reserve at 12 h
Translucent blue Grand Feu enamel with laser-engraved matt numerals and track
Matt blue hour and minute hands
Orange seconds hand
56 +/- 2 hours
Baseplate partly circular grained
Steelwork with polished chamfers
Polished screw heads with chamfered slots
Pegs with polished rounded ends
Diameter: 42 mm
Total height: 9.50 mm
Finishing: Sand-blasted case, polished and sand-blasted bezel, polished caseband decoration, polished chamfers
3-row flat-link
Finish: sand-blasted with polished chamfers
- Movement without dial : 197
- Cased up on bracelet : 422
- Jewels : 21
Technical description