CHRONOGRAPHE FB - Ref. FB
Tokyo Boutique ANNIVERSAIRE Serie

CHRONOGRAPHE FB - Ref. FB Calibre 1518.2 FP Journe FP Journe

FlyBack Chronograph
Limited Series: 200 pieces
Polished Titanium Anniversary case, crown and pushers in 18K 6N Gold
Diameter: 40 mm
Overall height: 10.4 mm
Dial: ruthenium-coated guilloché Silver, counters in sapphire
Hands: 5N gilt, red lacquered and ivory Steel
Calibre 1518.2

Technical Specifications

Movement :

    In 18K rose Gold
    Mechanical with manual winding

Main Characteristics :

    Crown with 3 positions
    Position 1: winding
    Position 2: correction of the date
    Position 3: time setting
    Pusher at 2h for chronograph start and stop functions
    Pusher at 4h for chronograph reset and flyback functions

Indications :

    Hours, minutes and flyback chronograph seconds (2 minutes per revolution) in the center
    60-second counter at 9h
    60-minute counter at 3h
    Big date at 6h

Dimensions :

    Overall diameter: 34.20 mm
    Casing-up diameter: 33.60 mm
    Overall height: 5.90 mm
    Height of hands: 2.20 mm
    Diameter of stem thread: S1.20 mm

Balance :

    In-line lever escapement, 15-tooth escape wheel
    Chronometric with four adjustable inertia weights
    Anachron balance spring
    Mobile stud holders
    Free-sprung balance
    Nivatronic laser-welded to collet
    Pinned GE stud

Frequency :

    21,600 v/h (3Hz)

Inertia :

    10.10 mg*cm2

Angle of lift :

    52°

Amplitude :

    0h dial up: 300°
    24h dial up: 260°

Power reserve :

    80 hours

Finishing :

    Circular stripes on the bridges, circular graining on the baseplate, polished screw heads with chamfered slots, pegs with polished rounded ends, straight-grained steel work

Number of Parts :

    Movement without dial: 245
    Cased up with strap: 305
    Jewels: 25

Movement :

    In 18K rose Gold
    Mechanical with manual winding

Main Characteristics :

    Crown with 3 positions
    Position 1: winding
    Position 2: correction of the date
    Position 3: time setting
    Pusher at 2h for chronograph start and stop functions
    Pusher at 4h for chronograph reset and flyback functions

Indications :

    Hours, minutes and flyback chronograph seconds (2 minutes per revolution) in the center
    60-second counter at 9h
    60-minute counter at 3h
    Big date at 6h

Dimensions :

    Overall diameter: 34.20 mm
    Casing-up diameter: 33.60 mm
    Overall height: 5.90 mm
    Height of hands: 2.20 mm
    Diameter of stem thread: S1.20 mm

Balance :

    In-line lever escapement, 15-tooth escape wheel
    Chronometric with four adjustable inertia weights
    Anachron balance spring
    Mobile stud holders
    Free-sprung balance
    Nivatronic laser-welded to collet
    Pinned GE stud

Frequency :

    21,600 v/h (3Hz)

Inertia :

    10.10 mg*cm2

Angle of lift :

    52°

Amplitude :

    0h dial up: 300°
    24h dial up: 260°

Power reserve :

    80 hours

Finishing :

    Circular stripes on the bridges, circular graining on the baseplate, polished screw heads with chamfered slots, pegs with polished rounded ends, straight-grained steel work

Number of Parts :

    Movement without dial: 245
    Cased up with strap: 305
    Jewels: 25


At the heart of the movement
At the heart of the movement
fpjourne

Technical description


fpjourne

Technical description


FlyBack Chronograph
Limited Series: 200 pieces
Polished Titanium Anniversary case, crown and pushers in 18K 6N Gold
Diameter: 40 mm
Overall height: 10.4 mm
Dial: ruthenium-coated guilloché Silver, counters in sapphire
Hands: 5N gilt, red lacquered and ivory Steel
Finishing
FlyBack Chronograph
Limited Series: 200 pieces
Polished Titanium Anniversary case, crown and pushers in 18K 6N Gold
Diameter: 40 mm
Overall height: 10.4 mm
Dial: ruthenium-coated guilloché Silver, counters in sapphire
Hands: 5N gilt, red lacquered and ivory Steel
Calibre 1518.2

Technical Specifications

Movement :

    In 18K rose Gold
    Mechanical with manual winding

Main Characteristics :

    Crown with 3 positions
    Position 1: winding
    Position 2: correction of the date
    Position 3: time setting
    Pusher at 2h for chronograph start and stop functions
    Pusher at 4h for chronograph reset and flyback functions

Indications :

    Hours, minutes and flyback chronograph seconds (2 minutes per revolution) in the center
    60-second counter at 9h
    60-minute counter at 3h
    Big date at 6h

Dimensions :

    Overall diameter: 34.20 mm
    Casing-up diameter: 33.60 mm
    Overall height: 5.90 mm
    Height of hands: 2.20 mm
    Diameter of stem thread: S1.20 mm

Balance :

    In-line lever escapement, 15-tooth escape wheel
    Chronometric with four adjustable inertia weights
    Anachron balance spring
    Mobile stud holders
    Free-sprung balance
    Nivatronic laser-welded to collet
    Pinned GE stud

Frequency :

    21,600 v/h (3Hz)

Inertia :

    10.10 mg*cm2

Angle of lift :

    52°

Amplitude :

    0h dial up: 300°
    24h dial up: 260°

Power reserve :

    80 hours

Finishing :

    Circular stripes on the bridges, circular graining on the baseplate, polished screw heads with chamfered slots, pegs with polished rounded ends, straight-grained steel work

Number of Parts :

    Movement without dial: 245
    Cased up with strap: 305
    Jewels: 25

Movement :

    In 18K rose Gold
    Mechanical with manual winding

Main Characteristics :

    Crown with 3 positions
    Position 1: winding
    Position 2: correction of the date
    Position 3: time setting
    Pusher at 2h for chronograph start and stop functions
    Pusher at 4h for chronograph reset and flyback functions

Indications :

    Hours, minutes and flyback chronograph seconds (2 minutes per revolution) in the center
    60-second counter at 9h
    60-minute counter at 3h
    Big date at 6h

Dimensions :

    Overall diameter: 34.20 mm
    Casing-up diameter: 33.60 mm
    Overall height: 5.90 mm
    Height of hands: 2.20 mm
    Diameter of stem thread: S1.20 mm

Balance :

    In-line lever escapement, 15-tooth escape wheel
    Chronometric with four adjustable inertia weights
    Anachron balance spring
    Mobile stud holders
    Free-sprung balance
    Nivatronic laser-welded to collet
    Pinned GE stud

Frequency :

    21,600 v/h (3Hz)

Inertia :

    10.10 mg*cm2

Angle of lift :

    52°

Amplitude :

    0h dial up: 300°
    24h dial up: 260°

Power reserve :

    80 hours

Finishing :

    Circular stripes on the bridges, circular graining on the baseplate, polished screw heads with chamfered slots, pegs with polished rounded ends, straight-grained steel work

Number of Parts :

    Movement without dial: 245
    Cased up with strap: 305
    Jewels: 25


At the heart of the movement
At the heart of the movement
fpjourne

Technical description


fpjourne

Technical description


CHRONOGRAPHE FB - Ref. FB Calibre 1518.2 FP Journe FP Journe

Other views
F.P.Journe
F.P.Journe
F.P.Journe

About

At a time when watch brands favoured retailers for their distribution, François-Paul Journe chose not to follow convention. He was the first to open a subsidiary and a boutique under his own name in Aoyama, in central Tokyo. He took a bold step, relying above all on his instinct and his admiration for Japan, a country that cultivates both modernity and age-old traditions.

Just a stone's throw from the Nezu Museum, in the Omotesando district, the F.P.Journe Boutique opened its doors in September 2003 inside 'La Collezione', the work of Tadao Ando, the architect of spirituality, celebrated in his country as a national treasure, whose minimalist style is characterised by geometric shapes in concrete and a subtle mastery of natural light. Initially housed on the 1st floor, the installation of a monumental double staircase in April 2004 made it possible to connect the ground floor, bringing the total surface area to 300 m2.

To echo the curves of the balustrade, display cases were specially designed by Swiss metalworker Xavier Dietlin. They would be called "Archange". Timeless, they resemble sculptures and are still the common thread running through all the F.P.Journe Boutiques.

The layout was entirely imagined by Seihachi Sagawa and François-Paul Journe, each element having been meticulously chosen to create a singular place reflecting its philosophy. Before crossing the threshold, one notices the original door handle manufactured in Japan and fashioned in the effigy of the rotor of the Octa calibre. The interior decoration perpetuates the long history of watchmaking. Portraits of the great master watchmakers of the 17th and 18th centuries take pride of place in small alcoves, while workbenches, "Quinquet" lamps, lathes and other antique tools elegantly decorate the different areas, not forgetting the library, rich in works on the art and measurement of time. And, for the first time in the world in a watchmaking boutique, there's a bar where collectors and enthusiasts can meet “as if at home” for a coffee and a chat about their passion and favourite subject. To complete the décor, the walls are adorned with large monochrome frescoes showing watchmakers at work, inviting visitors to immerse themselves in the world of the Manufacture.

The Tokyo Boutique was an important milestone in the brand's history and the starting point for its worldwide expansion. Today, 12 F.P.Journe Boutiques and Maisons welcome our collectors, from Hong Kong to Geneva, from Paris to New York. To thank the customers of its Boutiques, François-Paul Journe decided to create the Tokyo Boutique Anniversaire Series in their honour. The first edition, produced in 2005, was an exclusive version of the Chronomètre Souverain (20 pieces), with a polished Titanium case, an 18K 6N Gold crown and a ruthenium dial. This was followed by the Chronomètre à Résonance in 2006 (12 pieces), the Tourbillon Souverain in 2007 (20 pieces), the Octa Perpétuelle in 2009 (99 pieces) and, finally, the Centigraphe Souverain in 2016 to celebrate the tenth anniversary of each of its Boutiques (80 pieces in all), each piece being numbered and engraved with the name of the corresponding city.

To celebrate twenty years of presence in Japan, an event was organised in the Tokyo Boutique, bringing together a community of enthusiasts and collectors from the four corners of the globe. The highlight of the evening was the presentation of the commemorative piece: the Chronographe FB. This latest iteration takes up the aesthetic codes of the previous versions: 40 mm polished Titanium case, 18K 6N Gold crown and pushers, ruthenium-coated guilloché Silver dial, sapphire counters, complemented by a burgundy alligator leather strap mounted on an 18K 6N Gold folding clasp.

The new Calibre 1518.2 features a "fly-back" function that allows the wearer to reset and restart the chronograph instantly by simply pressing the pusher at 4h, thus enabling successive measurements to be taken. The tachymeter scale indicates the speed for a distance based on 1000m using the chronograph seconds hand, which makes one complete revolution in 2 minutes. The minute counter at 3h rotates in 60 minutes, with each jump of the hand equalling 2 minutes. At 9h is the movement's second hand counter. Subtly integrated into the ruthenium dial, the very large date is positioned at 6h.

The Chronographe FB, produced at 200 pieces, will be the brand's last Limited Series.

Technical Specifications

Movement :

    In 18K rose Gold
    Mechanical with manual winding

Main Characteristics :

    Crown with 3 positions
    Position 1: winding
    Position 2: correction of the date
    Position 3: time setting
    Pusher at 2h for chronograph start and stop functions
    Pusher at 4h for chronograph reset and flyback functions

Indications :

    Hours, minutes and flyback chronograph seconds (2 minutes per revolution) in the center
    60-second counter at 9h
    60-minute counter at 3h
    Big date at 6h

Dimensions :

    Overall diameter: 34.20 mm
    Casing-up diameter: 33.60 mm
    Overall height: 5.90 mm
    Height of hands: 2.20 mm
    Diameter of stem thread: S1.20 mm

Balance :

    In-line lever escapement, 15-tooth escape wheel
    Chronometric with four adjustable inertia weights
    Anachron balance spring
    Mobile stud holders
    Free-sprung balance
    Nivatronic laser-welded to collet
    Pinned GE stud

Frequency :

    21,600 v/h (3Hz)

Inertia :

    10.10 mg*cm2

Angle of lift :

    52°

Amplitude :

    0h dial up: 300°
    24h dial up: 260°

Power reserve :

    80 hours

Finishing :

    Circular stripes on the bridges, circular graining on the baseplate, polished screw heads with chamfered slots, pegs with polished rounded ends, straight-grained steel work

Number of Parts :

    Movement without dial: 245
    Cased up with strap: 305
    Jewels: 25

Movement :

    In 18K rose Gold
    Mechanical with manual winding

Main Characteristics :

    Crown with 3 positions
    Position 1: winding
    Position 2: correction of the date
    Position 3: time setting
    Pusher at 2h for chronograph start and stop functions
    Pusher at 4h for chronograph reset and flyback functions

Indications :

    Hours, minutes and flyback chronograph seconds (2 minutes per revolution) in the center
    60-second counter at 9h
    60-minute counter at 3h
    Big date at 6h

Dimensions :

    Overall diameter: 34.20 mm
    Casing-up diameter: 33.60 mm
    Overall height: 5.90 mm
    Height of hands: 2.20 mm
    Diameter of stem thread: S1.20 mm

Balance :

    In-line lever escapement, 15-tooth escape wheel
    Chronometric with four adjustable inertia weights
    Anachron balance spring
    Mobile stud holders
    Free-sprung balance
    Nivatronic laser-welded to collet
    Pinned GE stud

Frequency :

    21,600 v/h (3Hz)

Inertia :

    10.10 mg*cm2

Angle of lift :

    52°

Amplitude :

    0h dial up: 300°
    24h dial up: 260°

Power reserve :

    80 hours

Finishing :

    Circular stripes on the bridges, circular graining on the baseplate, polished screw heads with chamfered slots, pegs with polished rounded ends, straight-grained steel work

Number of Parts :

    Movement without dial: 245
    Cased up with strap: 305
    Jewels: 25


At the heart of the movement
At the heart of the movement
fpjourne

Technical description


fpjourne

Technical description


  • About

    At a time when watch brands favoured retailers for their distribution, François-Paul Journe chose not to follow convention. He was the first to open a subsidiary and a boutique under his own name in Aoyama, in central Tokyo. He took a bold step, relying above all on his instinct and his admiration for Japan, a country that cultivates both modernity and age-old traditions.

    Just a stone's throw from the Nezu Museum, in the Omotesando district, the F.P.Journe Boutique opened its doors in September 2003 inside 'La Collezione', the work of Tadao Ando, the architect of spirituality, celebrated in his country as a national treasure, whose minimalist style is characterised by geometric shapes in concrete and a subtle mastery of natural light. Initially housed on the 1st floor, the installation of a monumental double staircase in April 2004 made it possible to connect the ground floor, bringing the total surface area to 300 m2.

    To echo the curves of the balustrade, display cases were specially designed by Swiss metalworker Xavier Dietlin. They would be called "Archange". Timeless, they resemble sculptures and are still the common thread running through all the F.P.Journe Boutiques.

    The layout was entirely imagined by Seihachi Sagawa and François-Paul Journe, each element having been meticulously chosen to create a singular place reflecting its philosophy. Before crossing the threshold, one notices the original door handle manufactured in Japan and fashioned in the effigy of the rotor of the Octa calibre. The interior decoration perpetuates the long history of watchmaking. Portraits of the great master watchmakers of the 17th and 18th centuries take pride of place in small alcoves, while workbenches, "Quinquet" lamps, lathes and other antique tools elegantly decorate the different areas, not forgetting the library, rich in works on the art and measurement of time. And, for the first time in the world in a watchmaking boutique, there's a bar where collectors and enthusiasts can meet “as if at home” for a coffee and a chat about their passion and favourite subject. To complete the décor, the walls are adorned with large monochrome frescoes showing watchmakers at work, inviting visitors to immerse themselves in the world of the Manufacture.

    The Tokyo Boutique was an important milestone in the brand's history and the starting point for its worldwide expansion. Today, 12 F.P.Journe Boutiques and Maisons welcome our collectors, from Hong Kong to Geneva, from Paris to New York. To thank the customers of its Boutiques, François-Paul Journe decided to create the Tokyo Boutique Anniversaire Series in their honour. The first edition, produced in 2005, was an exclusive version of the Chronomètre Souverain (20 pieces), with a polished Titanium case, an 18K 6N Gold crown and a ruthenium dial. This was followed by the Chronomètre à Résonance in 2006 (12 pieces), the Tourbillon Souverain in 2007 (20 pieces), the Octa Perpétuelle in 2009 (99 pieces) and, finally, the Centigraphe Souverain in 2016 to celebrate the tenth anniversary of each of its Boutiques (80 pieces in all), each piece being numbered and engraved with the name of the corresponding city.

    To celebrate twenty years of presence in Japan, an event was organised in the Tokyo Boutique, bringing together a community of enthusiasts and collectors from the four corners of the globe. The highlight of the evening was the presentation of the commemorative piece: the Chronographe FB. This latest iteration takes up the aesthetic codes of the previous versions: 40 mm polished Titanium case, 18K 6N Gold crown and pushers, ruthenium-coated guilloché Silver dial, sapphire counters, complemented by a burgundy alligator leather strap mounted on an 18K 6N Gold folding clasp.

    The new Calibre 1518.2 features a "fly-back" function that allows the wearer to reset and restart the chronograph instantly by simply pressing the pusher at 4h, thus enabling successive measurements to be taken. The tachymeter scale indicates the speed for a distance based on 1000m using the chronograph seconds hand, which makes one complete revolution in 2 minutes. The minute counter at 3h rotates in 60 minutes, with each jump of the hand equalling 2 minutes. At 9h is the movement's second hand counter. Subtly integrated into the ruthenium dial, the very large date is positioned at 6h.

    The Chronographe FB, produced at 200 pieces, will be the brand's last Limited Series.
  • Technical description

    Technical Specifications

    Movement :

      In 18K rose Gold
      Mechanical with manual winding

    Main Characteristics :

      Crown with 3 positions
      Position 1: winding
      Position 2: correction of the date
      Position 3: time setting
      Pusher at 2h for chronograph start and stop functions
      Pusher at 4h for chronograph reset and flyback functions

    Indications :

      Hours, minutes and flyback chronograph seconds (2 minutes per revolution) in the center
      60-second counter at 9h
      60-minute counter at 3h
      Big date at 6h

    Dimensions :

      Overall diameter: 34.20 mm
      Casing-up diameter: 33.60 mm
      Overall height: 5.90 mm
      Height of hands: 2.20 mm
      Diameter of stem thread: S1.20 mm

    Balance :

      In-line lever escapement, 15-tooth escape wheel
      Chronometric with four adjustable inertia weights
      Anachron balance spring
      Mobile stud holders
      Free-sprung balance
      Nivatronic laser-welded to collet
      Pinned GE stud

    Frequency :

      21,600 v/h (3Hz)

    Inertia :

      10.10 mg*cm2

    Angle of lift :

      52°

    Amplitude :

      0h dial up: 300°
      24h dial up: 260°

    Power reserve :

      80 hours

    Finishing :

      Circular stripes on the bridges, circular graining on the baseplate, polished screw heads with chamfered slots, pegs with polished rounded ends, straight-grained steel work

    Number of Parts :

      Movement without dial: 245
      Cased up with strap: 305
      Jewels: 25

    Movement :

      In 18K rose Gold
      Mechanical with manual winding

    Main Characteristics :

      Crown with 3 positions
      Position 1: winding
      Position 2: correction of the date
      Position 3: time setting
      Pusher at 2h for chronograph start and stop functions
      Pusher at 4h for chronograph reset and flyback functions

    Indications :

      Hours, minutes and flyback chronograph seconds (2 minutes per revolution) in the center
      60-second counter at 9h
      60-minute counter at 3h
      Big date at 6h

    Dimensions :

      Overall diameter: 34.20 mm
      Casing-up diameter: 33.60 mm
      Overall height: 5.90 mm
      Height of hands: 2.20 mm
      Diameter of stem thread: S1.20 mm

    Balance :

      In-line lever escapement, 15-tooth escape wheel
      Chronometric with four adjustable inertia weights
      Anachron balance spring
      Mobile stud holders
      Free-sprung balance
      Nivatronic laser-welded to collet
      Pinned GE stud

    Frequency :

      21,600 v/h (3Hz)

    Inertia :

      10.10 mg*cm2

    Angle of lift :

      52°

    Amplitude :

      0h dial up: 300°
      24h dial up: 260°

    Power reserve :

      80 hours

    Finishing :

      Circular stripes on the bridges, circular graining on the baseplate, polished screw heads with chamfered slots, pegs with polished rounded ends, straight-grained steel work

    Number of Parts :

      Movement without dial: 245
      Cased up with strap: 305
      Jewels: 25


    At the heart of the movement
    At the heart of the movement
    fpjourne

    Technical description


    fpjourne

    Technical description


Technical Specifications

Movement :

    In 18K rose Gold
    Mechanical with manual winding

Main Characteristics :

    Crown with 3 positions
    Position 1: winding
    Position 2: correction of the date
    Position 3: time setting
    Pusher at 2h for chronograph start and stop functions
    Pusher at 4h for chronograph reset and flyback functions

Indications :

    Hours, minutes and flyback chronograph seconds (2 minutes per revolution) in the center
    60-second counter at 9h
    60-minute counter at 3h
    Big date at 6h

Dimensions :

    Overall diameter: 34.20 mm
    Casing-up diameter: 33.60 mm
    Overall height: 5.90 mm
    Height of hands: 2.20 mm
    Diameter of stem thread: S1.20 mm

Balance :

    In-line lever escapement, 15-tooth escape wheel
    Chronometric with four adjustable inertia weights
    Anachron balance spring
    Mobile stud holders
    Free-sprung balance
    Nivatronic laser-welded to collet
    Pinned GE stud

Frequency :

    21,600 v/h (3Hz)

Inertia :

    10.10 mg*cm2

Angle of lift :

    52°

Amplitude :

    0h dial up: 300°
    24h dial up: 260°

Power reserve :

    80 hours

Finishing :

    Circular stripes on the bridges, circular graining on the baseplate, polished screw heads with chamfered slots, pegs with polished rounded ends, straight-grained steel work

Number of Parts :

    Movement without dial: 245
    Cased up with strap: 305
    Jewels: 25

Movement :

    In 18K rose Gold
    Mechanical with manual winding

Main Characteristics :

    Crown with 3 positions
    Position 1: winding
    Position 2: correction of the date
    Position 3: time setting
    Pusher at 2h for chronograph start and stop functions
    Pusher at 4h for chronograph reset and flyback functions

Indications :

    Hours, minutes and flyback chronograph seconds (2 minutes per revolution) in the center
    60-second counter at 9h
    60-minute counter at 3h
    Big date at 6h

Dimensions :

    Overall diameter: 34.20 mm
    Casing-up diameter: 33.60 mm
    Overall height: 5.90 mm
    Height of hands: 2.20 mm
    Diameter of stem thread: S1.20 mm

Balance :

    In-line lever escapement, 15-tooth escape wheel
    Chronometric with four adjustable inertia weights
    Anachron balance spring
    Mobile stud holders
    Free-sprung balance
    Nivatronic laser-welded to collet
    Pinned GE stud

Frequency :

    21,600 v/h (3Hz)

Inertia :

    10.10 mg*cm2

Angle of lift :

    52°

Amplitude :

    0h dial up: 300°
    24h dial up: 260°

Power reserve :

    80 hours

Finishing :

    Circular stripes on the bridges, circular graining on the baseplate, polished screw heads with chamfered slots, pegs with polished rounded ends, straight-grained steel work

Number of Parts :

    Movement without dial: 245
    Cased up with strap: 305
    Jewels: 25


At the heart of the movement
At the heart of the movement
fpjourne

Technical description


fpjourne

Technical description