Calibre 1505 https://www.fpjourne.com/en/collection/souveraine-collection/sonnerie-souveraine FP Journe https://www.fpjourne.com/en FP Journe
Diameter: 42 mm
Overall height: 12.5 mm
Dial: white Gold and whitened guilloché Silver
Hands: blued Steel
Technical Specifications
Calibre 1505
Manual winding
18K rose Gold
40 jewels
- Overall diameter : 35.80 mm
- Cased-up diameter : 35.00 mm
- Height of frame : 6.25 mm
- Overall height : 8.60 mm
- Height of winding stem : 3.41 mm
- Diameter of stem thread : S1.20 mm
Inertia: 10.10 mgcm2
Angle of lift: 52°
0h dial up: 320°
24h dial up: 200°
Linear escapement with 15-tooth escape wheel
Hours and minutes at 3h00.
Sub-seconds at 6h00.
Power Reserve.
Strike mode selection.
View to striking hammers.
Grand strike, Small strike in passing each quarter hour
Silent mode
Minute-repeater on demand
120 hour without strike.
approx. 48 hours with strike.
approx. 24 hours after the strike is exhausted.
23 turns of the crown
Steel
Diameter: 42.00 mm
Overall height: 12.25 mm
2 positions for the crown
Minute-repeater pusher at 2 o'clock
Strike-selector pusher at 4 o'clock
Movement without dial: 408
Complete watch on leather strap: 465
Complete watch on steel bracelet: 582
Calibre 1505
Manual winding
18K rose Gold
40 jewels
- Overall diameter : 35.80 mm
- Cased-up diameter : 35.00 mm
- Height of frame : 6.25 mm
- Overall height : 8.60 mm
- Height of winding stem : 3.41 mm
- Diameter of stem thread : S1.20 mm
Inertia: 10.10 mgcm2
Angle of lift: 52°
0h dial up: 320°
24h dial up: 200°
Linear escapement with 15-tooth escape wheel
Hours and minutes at 3h00.
Sub-seconds at 6h00.
Power Reserve.
Strike mode selection.
View to striking hammers.
Grand strike, Small strike in passing each quarter hour
Silent mode
Minute-repeater on demand
120 hour without strike.
approx. 48 hours with strike.
approx. 24 hours after the strike is exhausted.
23 turns of the crown
Steel
Diameter: 42.00 mm
Overall height: 12.25 mm
2 positions for the crown
Minute-repeater pusher at 2 o'clock
Strike-selector pusher at 4 o'clock
Movement without dial: 408
Complete watch on leather strap: 465
Complete watch on steel bracelet: 582
Technical description
Six years of research and 10 patents
Technical description
Six years of research and 10 patents
Diameter: 42 mm
Overall height: 12.5 mm
Dial: white Gold and whitened guilloché Silver
Hands: blued Steel
Technical Specifications
Calibre 1505
Manual winding
18K rose Gold
40 jewels
- Overall diameter : 35.80 mm
- Cased-up diameter : 35.00 mm
- Height of frame : 6.25 mm
- Overall height : 8.60 mm
- Height of winding stem : 3.41 mm
- Diameter of stem thread : S1.20 mm
Inertia: 10.10 mgcm2
Angle of lift: 52°
0h dial up: 320°
24h dial up: 200°
Linear escapement with 15-tooth escape wheel
Hours and minutes at 3h00.
Sub-seconds at 6h00.
Power Reserve.
Strike mode selection.
View to striking hammers.
Grand strike, Small strike in passing each quarter hour
Silent mode
Minute-repeater on demand
120 hour without strike.
approx. 48 hours with strike.
approx. 24 hours after the strike is exhausted.
23 turns of the crown
Steel
Diameter: 42.00 mm
Overall height: 12.25 mm
2 positions for the crown
Minute-repeater pusher at 2 o'clock
Strike-selector pusher at 4 o'clock
Movement without dial: 408
Complete watch on leather strap: 465
Complete watch on steel bracelet: 582
Calibre 1505
Manual winding
18K rose Gold
40 jewels
- Overall diameter : 35.80 mm
- Cased-up diameter : 35.00 mm
- Height of frame : 6.25 mm
- Overall height : 8.60 mm
- Height of winding stem : 3.41 mm
- Diameter of stem thread : S1.20 mm
Inertia: 10.10 mgcm2
Angle of lift: 52°
0h dial up: 320°
24h dial up: 200°
Linear escapement with 15-tooth escape wheel
Hours and minutes at 3h00.
Sub-seconds at 6h00.
Power Reserve.
Strike mode selection.
View to striking hammers.
Grand strike, Small strike in passing each quarter hour
Silent mode
Minute-repeater on demand
120 hour without strike.
approx. 48 hours with strike.
approx. 24 hours after the strike is exhausted.
23 turns of the crown
Steel
Diameter: 42.00 mm
Overall height: 12.25 mm
2 positions for the crown
Minute-repeater pusher at 2 o'clock
Strike-selector pusher at 4 o'clock
Movement without dial: 408
Complete watch on leather strap: 465
Complete watch on steel bracelet: 582
Technical description
Six years of research and 10 patents
Technical description
Six years of research and 10 patents
Diameter: 42 mm
Overall height: 12.5 mm
Dial: white Gold and whitened guilloché Silver
Hands: blued Steel
Diameter: 42 mm
Overall height: 12.5 mm
Dial: white Gold and whitened guilloché Silver
Hands: blued Steel
Technical Specifications
Calibre 1505
Manual winding
18K rose Gold
40 jewels
- Overall diameter : 35.80 mm
- Cased-up diameter : 35.00 mm
- Height of frame : 6.25 mm
- Overall height : 8.60 mm
- Height of winding stem : 3.41 mm
- Diameter of stem thread : S1.20 mm
Inertia: 10.10 mgcm2
Angle of lift: 52°
0h dial up: 320°
24h dial up: 200°
Linear escapement with 15-tooth escape wheel
Hours and minutes at 3h00.
Sub-seconds at 6h00.
Power Reserve.
Strike mode selection.
View to striking hammers.
Grand strike, Small strike in passing each quarter hour
Silent mode
Minute-repeater on demand
120 hour without strike.
approx. 48 hours with strike.
approx. 24 hours after the strike is exhausted.
23 turns of the crown
Steel
Diameter: 42.00 mm
Overall height: 12.25 mm
2 positions for the crown
Minute-repeater pusher at 2 o'clock
Strike-selector pusher at 4 o'clock
Movement without dial: 408
Complete watch on leather strap: 465
Complete watch on steel bracelet: 582
Calibre 1505
Manual winding
18K rose Gold
40 jewels
- Overall diameter : 35.80 mm
- Cased-up diameter : 35.00 mm
- Height of frame : 6.25 mm
- Overall height : 8.60 mm
- Height of winding stem : 3.41 mm
- Diameter of stem thread : S1.20 mm
Inertia: 10.10 mgcm2
Angle of lift: 52°
0h dial up: 320°
24h dial up: 200°
Linear escapement with 15-tooth escape wheel
Hours and minutes at 3h00.
Sub-seconds at 6h00.
Power Reserve.
Strike mode selection.
View to striking hammers.
Grand strike, Small strike in passing each quarter hour
Silent mode
Minute-repeater on demand
120 hour without strike.
approx. 48 hours with strike.
approx. 24 hours after the strike is exhausted.
23 turns of the crown
Steel
Diameter: 42.00 mm
Overall height: 12.25 mm
2 positions for the crown
Minute-repeater pusher at 2 o'clock
Strike-selector pusher at 4 o'clock
Movement without dial: 408
Complete watch on leather strap: 465
Complete watch on steel bracelet: 582
Technical description
Six years of research and 10 patents
Technical description
Six years of research and 10 patents
Diameter: 42 mm
Overall height: 12.5 mm
Dial: white Gold and whitened guilloché Silver
Hands: blued Steel
Technical Specifications
Calibre 1505
Manual winding
18K rose Gold
40 jewels
- Overall diameter : 35.80 mm
- Cased-up diameter : 35.00 mm
- Height of frame : 6.25 mm
- Overall height : 8.60 mm
- Height of winding stem : 3.41 mm
- Diameter of stem thread : S1.20 mm
Inertia: 10.10 mgcm2
Angle of lift: 52°
0h dial up: 320°
24h dial up: 200°
Linear escapement with 15-tooth escape wheel
Hours and minutes at 3h00.
Sub-seconds at 6h00.
Power Reserve.
Strike mode selection.
View to striking hammers.
Grand strike, Small strike in passing each quarter hour
Silent mode
Minute-repeater on demand
120 hour without strike.
approx. 48 hours with strike.
approx. 24 hours after the strike is exhausted.
23 turns of the crown
Steel
Diameter: 42.00 mm
Overall height: 12.25 mm
2 positions for the crown
Minute-repeater pusher at 2 o'clock
Strike-selector pusher at 4 o'clock
Movement without dial: 408
Complete watch on leather strap: 465
Complete watch on steel bracelet: 582
Calibre 1505
Manual winding
18K rose Gold
40 jewels
- Overall diameter : 35.80 mm
- Cased-up diameter : 35.00 mm
- Height of frame : 6.25 mm
- Overall height : 8.60 mm
- Height of winding stem : 3.41 mm
- Diameter of stem thread : S1.20 mm
Inertia: 10.10 mgcm2
Angle of lift: 52°
0h dial up: 320°
24h dial up: 200°
Linear escapement with 15-tooth escape wheel
Hours and minutes at 3h00.
Sub-seconds at 6h00.
Power Reserve.
Strike mode selection.
View to striking hammers.
Grand strike, Small strike in passing each quarter hour
Silent mode
Minute-repeater on demand
120 hour without strike.
approx. 48 hours with strike.
approx. 24 hours after the strike is exhausted.
23 turns of the crown
Steel
Diameter: 42.00 mm
Overall height: 12.25 mm
2 positions for the crown
Minute-repeater pusher at 2 o'clock
Strike-selector pusher at 4 o'clock
Movement without dial: 408
Complete watch on leather strap: 465
Complete watch on steel bracelet: 582
Technical description
Six years of research and 10 patents
Technical description
Six years of research and 10 patents
About
Six years of Research for the « INVENIT »
Ten patents for the « FECIT »
GRAND-STRIKE CLOCKWATCH AND MINUTE-REPEATER
Full grand-strike functionality and operational safety protected by 10 patents
The grand-strike clockwatch is the most complex of horological creations. The greatest difficulty in its construction is to achieve full clockwatch capability from the limited energy in a wristwatch, without compromising the sound and reliability of the chime.
In this watch, a single mainspring provides enough energy for 24 hours of grand strike (96 full chimes in passing), without using the minute-repeater. The chiming functions alone use up almost 60% of the main-spring’s energy, and in silence mode without the chime, the movement iruns for five days.
Constructing this movement has been a permanent search to save energy in maximising mechanical efficiency. The result is a low-tension movement with gentle mechanisms that have to be very finely adjusted to ensure unfailing chimes 35,040 times a year.
Operating a chiming watch has always been risky. If you do the slightest thing wrong, like setting the time while the chimes are ringing, you can damage precious mechanisms.
Thus, the first entry in the specifications book for this watch was: «make it safe to use by an eight-year-old child.» I have to admit that the eight-year-old set me the toughest assignment of my career. To meet the demands, I had to construct a movement on new mechanical principles. In this piece, 10 patents underwrite the «Invenit» of this work of watchmaking art. The «Fecit» took me six years.
Each Sonnerie Souveraine is called by the name of its owner.
GRAND-STRIKE CLOCKWATCH AND MINUTE-REPEATER
Full grand-strike functionality and operational safety protected by 10 patents
The grand-strike clockwatch is the most complex of horological creations. The greatest difficulty in its construction is to achieve full clockwatch capability from the limited energy in a wristwatch, without compromising on the sound and reliability of the chime.
In your watch, a single mainspring provides enough energy for 24 hours in grand strike mode (96 full chimes in passing), and over 30 hours of reserve for time indication. The chiming functions alone use up almost 60% of the mainspring's energy, and without the chime, the movement will run for five days. Constructing this movement has been an exercise in minimising energy use by maximising mechanical efficiency. The result is a low-tension movement with gentle mechanisms that have to be very finely adjusted to ensure unfailing chimes 35,040 times a year. Operating a chiming watch has always been risky. If you do the slightest thing wrong, like setting the time while the chimes are ringing, you damage expensive mechanisms. Thus, the first entry in my specification book for your watch was: ""make it safe to use by an eight-year-old child."" You will forgive me if you knew that the eight-year-old set me the toughest assignment of my career. To meet the demands, I had to construct a movement on new mechanical principles. In this piece, 10 patents underwrite the ""Invenit"" of my watchmaking. ""Fecit"" took me five years.
François-Paul Journe
Technical Specifications
Calibre 1505
Manual winding
18K rose Gold
40 jewels
- Overall diameter : 35.80 mm
- Cased-up diameter : 35.00 mm
- Height of frame : 6.25 mm
- Overall height : 8.60 mm
- Height of winding stem : 3.41 mm
- Diameter of stem thread : S1.20 mm
Inertia: 10.10 mgcm2
Angle of lift: 52°
0h dial up: 320°
24h dial up: 200°
Linear escapement with 15-tooth escape wheel
Hours and minutes at 3h00.
Sub-seconds at 6h00.
Power Reserve.
Strike mode selection.
View to striking hammers.
Grand strike, Small strike in passing each quarter hour
Silent mode
Minute-repeater on demand
120 hour without strike.
approx. 48 hours with strike.
approx. 24 hours after the strike is exhausted.
23 turns of the crown
Steel
Diameter: 42.00 mm
Overall height: 12.25 mm
2 positions for the crown
Minute-repeater pusher at 2 o'clock
Strike-selector pusher at 4 o'clock
Movement without dial: 408
Complete watch on leather strap: 465
Complete watch on steel bracelet: 582
Calibre 1505
Manual winding
18K rose Gold
40 jewels
- Overall diameter : 35.80 mm
- Cased-up diameter : 35.00 mm
- Height of frame : 6.25 mm
- Overall height : 8.60 mm
- Height of winding stem : 3.41 mm
- Diameter of stem thread : S1.20 mm
Inertia: 10.10 mgcm2
Angle of lift: 52°
0h dial up: 320°
24h dial up: 200°
Linear escapement with 15-tooth escape wheel
Hours and minutes at 3h00.
Sub-seconds at 6h00.
Power Reserve.
Strike mode selection.
View to striking hammers.
Grand strike, Small strike in passing each quarter hour
Silent mode
Minute-repeater on demand
120 hour without strike.
approx. 48 hours with strike.
approx. 24 hours after the strike is exhausted.
23 turns of the crown
Steel
Diameter: 42.00 mm
Overall height: 12.25 mm
2 positions for the crown
Minute-repeater pusher at 2 o'clock
Strike-selector pusher at 4 o'clock
Movement without dial: 408
Complete watch on leather strap: 465
Complete watch on steel bracelet: 582
Technical description
Six years of research and 10 patents
Technical description
Six years of research and 10 patents
-
Aiguille d'Or 2006
-
About
THIS MODEL WAS PRODUCED BETWEEN 2006 AND 2019.
Six years of Research for the « INVENIT »
Ten patents for the « FECIT »
GRAND-STRIKE CLOCKWATCH AND MINUTE-REPEATER
Full grand-strike functionality and operational safety protected by 10 patents
The grand-strike clockwatch is the most complex of horological creations. The greatest difficulty in its construction is to achieve full clockwatch capability from the limited energy in a wristwatch, without compromising the sound and reliability of the chime.
In this watch, a single mainspring provides enough energy for 24 hours of grand strike (96 full chimes in passing), without using the minute-repeater. The chiming functions alone use up almost 60% of the main-spring’s energy, and in silence mode without the chime, the movement iruns for five days.
Constructing this movement has been a permanent search to save energy in maximising mechanical efficiency. The result is a low-tension movement with gentle mechanisms that have to be very finely adjusted to ensure unfailing chimes 35,040 times a year.
Operating a chiming watch has always been risky. If you do the slightest thing wrong, like setting the time while the chimes are ringing, you can damage precious mechanisms.
Thus, the first entry in the specifications book for this watch was: «make it safe to use by an eight-year-old child.» I have to admit that the eight-year-old set me the toughest assignment of my career. To meet the demands, I had to construct a movement on new mechanical principles. In this piece, 10 patents underwrite the «Invenit» of this work of watchmaking art. The «Fecit» took me six years.
Each Sonnerie Souveraine is called by the name of its owner. -
Testimony
THE SONNERIE SOUVERAINE
GRAND-STRIKE CLOCKWATCH AND MINUTE-REPEATER
Full grand-strike functionality and operational safety protected by 10 patents
The grand-strike clockwatch is the most complex of horological creations. The greatest difficulty in its construction is to achieve full clockwatch capability from the limited energy in a wristwatch, without compromising on the sound and reliability of the chime.
In your watch, a single mainspring provides enough energy for 24 hours in grand strike mode (96 full chimes in passing), and over 30 hours of reserve for time indication. The chiming functions alone use up almost 60% of the mainspring's energy, and without the chime, the movement will run for five days. Constructing this movement has been an exercise in minimising energy use by maximising mechanical efficiency. The result is a low-tension movement with gentle mechanisms that have to be very finely adjusted to ensure unfailing chimes 35,040 times a year. Operating a chiming watch has always been risky. If you do the slightest thing wrong, like setting the time while the chimes are ringing, you damage expensive mechanisms. Thus, the first entry in my specification book for your watch was: ""make it safe to use by an eight-year-old child."" You will forgive me if you knew that the eight-year-old set me the toughest assignment of my career. To meet the demands, I had to construct a movement on new mechanical principles. In this piece, 10 patents underwrite the ""Invenit"" of my watchmaking. ""Fecit"" took me five years.
François-Paul Journe -
Technical description
Technical Specifications
Movement :Calibre 1505
Manual winding
18K rose Gold
40 jewelsDimensions :- Overall diameter : 35.80 mm
- Cased-up diameter : 35.00 mm
- Height of frame : 6.25 mm
- Overall height : 8.60 mm
- Height of winding stem : 3.41 mm
- Diameter of stem thread : S1.20 mm
Balance :Inertia: 10.10 mgcm2
Angle of lift: 52°Amplitude :0h dial up: 320°
24h dial up: 200°Escapement :Linear escapement with 15-tooth escape wheel
Movement :Hours and minutes at 3h00.
Sub-seconds at 6h00.
Power Reserve.
Strike mode selection.
View to striking hammers.Strikes :Grand strike, Small strike in passing each quarter hour
Silent mode
Minute-repeater on demandAutonomy :120 hour without strike.
approx. 48 hours with strike.
approx. 24 hours after the strike is exhausted.Manual winding :23 turns of the crown
Case :Steel
Diameter: 42.00 mm
Overall height: 12.25 mmCrown & Pushers :2 positions for the crown
Minute-repeater pusher at 2 o'clock
Strike-selector pusher at 4 o'clockNumber of parts :Movement without dial: 408
Complete watch on leather strap: 465
Complete watch on steel bracelet: 582Movement :Calibre 1505
Manual winding
18K rose Gold
40 jewelsDimensions :- Overall diameter : 35.80 mm
- Cased-up diameter : 35.00 mm
- Height of frame : 6.25 mm
- Overall height : 8.60 mm
- Height of winding stem : 3.41 mm
- Diameter of stem thread : S1.20 mm
Balance :Inertia: 10.10 mgcm2
Angle of lift: 52°Amplitude :0h dial up: 320°
24h dial up: 200°Escapement :Linear escapement with 15-tooth escape wheel
Movement :Hours and minutes at 3h00.
Sub-seconds at 6h00.
Power Reserve.
Strike mode selection.
View to striking hammers.Strikes :Grand strike, Small strike in passing each quarter hour
Silent mode
Minute-repeater on demandAutonomy :120 hour without strike.
approx. 48 hours with strike.
approx. 24 hours after the strike is exhausted.Manual winding :23 turns of the crown
Case :Steel
Diameter: 42.00 mm
Overall height: 12.25 mmCrown & Pushers :2 positions for the crown
Minute-repeater pusher at 2 o'clock
Strike-selector pusher at 4 o'clockNumber of parts :Movement without dial: 408
Complete watch on leather strap: 465
Complete watch on steel bracelet: 582
At the heart of the movementAt the heart of the movementBrevet - EP 1 760 544 A1 - EP 1 760 545 A1 - EP 1 760 548 A1 - EP 1 760 549 A1 - EP 1 760 550 A1 - EP 1 760 551 A1 - EP 1 760 552 A1 - EP 1 760 553 A1 - EP 1 760 554 A1 - EP 1 760 555 A1Technical description
Six years of research and 10 patents
Brevet - EP 1 760 544 A1 - EP 1 760 545 A1 - EP 1 760 548 A1 - EP 1 760 549 A1 - EP 1 760 550 A1 - EP 1 760 551 A1 - EP 1 760 552 A1 - EP 1 760 553 A1 - EP 1 760 554 A1 - EP 1 760 555 A1Technical description
Six years of research and 10 patents
Technical Specifications
Calibre 1505
Manual winding
18K rose Gold
40 jewels
- Overall diameter : 35.80 mm
- Cased-up diameter : 35.00 mm
- Height of frame : 6.25 mm
- Overall height : 8.60 mm
- Height of winding stem : 3.41 mm
- Diameter of stem thread : S1.20 mm
Inertia: 10.10 mgcm2
Angle of lift: 52°
0h dial up: 320°
24h dial up: 200°
Linear escapement with 15-tooth escape wheel
Hours and minutes at 3h00.
Sub-seconds at 6h00.
Power Reserve.
Strike mode selection.
View to striking hammers.
Grand strike, Small strike in passing each quarter hour
Silent mode
Minute-repeater on demand
120 hour without strike.
approx. 48 hours with strike.
approx. 24 hours after the strike is exhausted.
23 turns of the crown
Steel
Diameter: 42.00 mm
Overall height: 12.25 mm
2 positions for the crown
Minute-repeater pusher at 2 o'clock
Strike-selector pusher at 4 o'clock
Movement without dial: 408
Complete watch on leather strap: 465
Complete watch on steel bracelet: 582
Calibre 1505
Manual winding
18K rose Gold
40 jewels
- Overall diameter : 35.80 mm
- Cased-up diameter : 35.00 mm
- Height of frame : 6.25 mm
- Overall height : 8.60 mm
- Height of winding stem : 3.41 mm
- Diameter of stem thread : S1.20 mm
Inertia: 10.10 mgcm2
Angle of lift: 52°
0h dial up: 320°
24h dial up: 200°
Linear escapement with 15-tooth escape wheel
Hours and minutes at 3h00.
Sub-seconds at 6h00.
Power Reserve.
Strike mode selection.
View to striking hammers.
Grand strike, Small strike in passing each quarter hour
Silent mode
Minute-repeater on demand
120 hour without strike.
approx. 48 hours with strike.
approx. 24 hours after the strike is exhausted.
23 turns of the crown
Steel
Diameter: 42.00 mm
Overall height: 12.25 mm
2 positions for the crown
Minute-repeater pusher at 2 o'clock
Strike-selector pusher at 4 o'clock
Movement without dial: 408
Complete watch on leather strap: 465
Complete watch on steel bracelet: 582
Technical description
Six years of research and 10 patents
Technical description
Six years of research and 10 patents