Calibre 1210 https://www.fpjourne.com/en/collection/elegante-collection/elegante-40-mm-titanium-inserts-and-2-rows-diamonds-0 FP Journe https://www.fpjourne.com/en FP Journe
Dimensions: 40 x 35 mm
Overall height: 7.35 mm
Dial: luminescent white centre with outer dial screwed Steel elements
Hands: blued Steel
Red rubber strap
Folding clasp
Technical Specifications
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Dimensions: 40 x 35 mm
Overall height: 7.35 mm
Dial: luminescent white centre with outer dial screwed Steel elements
Hands: blued Steel
Khaki Green rubber strap
Folding clasp
Technical Specifications
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Dimensions: 40 x 35 mm
Overall height: 7.35 mm
Dial: luminescent white centre with outer dial screwed Steel elements
Hands: blued Steel
Turquoise rubber strap
Folding clasp
Technical Specifications
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Dimensions: 40 x 35 mm
Overall height: 7.35 mm
Dial: luminescent white centre with outer dial screwed Steel elements
Hands: blued Steel
Midnight Blue rubber strap
Folding clasp
Technical Specifications
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Dimensions: 40 x 35 mm
Overall height: 7.35 mm
Dial: luminescent white centre with outer dial screwed Steel elements
Hands: blued Steel
Light Blue rubber strap
Folding clasp
Technical Specifications
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Dimensions: 40 x 35 mm
Overall height: 7.35 mm
Dial: luminescent white centre with outer dial screwed Steel elements
Hands: blued Steel
Red rubber strap
Folding clasp
Dimensions: 40 x 35 mm
Overall height: 7.35 mm
Dial: luminescent white centre with outer dial screwed Steel elements
Hands: blued Steel
Red rubber strap
Folding clasp
Technical Specifications
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Dimensions: 40 x 35 mm
Overall height: 7.35 mm
Dial: luminescent white centre with outer dial screwed Steel elements
Hands: blued Steel
Khaki Green rubber strap
Folding clasp
Technical Specifications
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Dimensions: 40 x 35 mm
Overall height: 7.35 mm
Dial: luminescent white centre with outer dial screwed Steel elements
Hands: blued Steel
Turquoise rubber strap
Folding clasp
Technical Specifications
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Dimensions: 40 x 35 mm
Overall height: 7.35 mm
Dial: luminescent white centre with outer dial screwed Steel elements
Hands: blued Steel
Midnight Blue rubber strap
Folding clasp
Technical Specifications
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Dimensions: 40 x 35 mm
Overall height: 7.35 mm
Dial: luminescent white centre with outer dial screwed Steel elements
Hands: blued Steel
Light Blue rubber strap
Folding clasp
Technical Specifications
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
About
THE FIRST LADIES COLLECTION BY F.P.JOURNE
A REVOLUTIONARY HOROLOGICAL CONCEPT
ALWAYS AHEAD OF HIS TIME, CONCILIATING TRADITION, INNOVATION AND MODERN TECHNOLOGY, F.P.JOURNE HAS DEVELOPED A REVOLUTIONARY HOROLOGICAL CONCEPT FOR HIS FIRST LADIES COLLECTION. IT WAS DESIGNED AND CONCEIVED EXCLUSIVELY FOR WOMEN, WITH EXTREMELY PRECISE TECHNICAL SPECIFICATIONS TO PROVIDE THIS WATCH A LONG AUTONOMY OF 8 TO 10 YEARS IN DAILY USE AND UP TO 18 YEARS IN STANDBY MODE.
8 YEARS OF DEVELOPMENT WERE NECESSARY FOR THIS INNOVATIVE MOVEMENT THAT COMBINES A GREAT COMFORT OF USE AND THE PERFORMANCES OF AN ELECTRO-MECHANICAL WATCH WITH FEMINITY, ELEGANCE AND PRECISION. THE “ÉLÉGANTE” ALLOWS THE TIME TO BE STOPPED AND STARTED AGAIN. THIS IS THE DREAM OF ALL WATCHMAKERS…
THE CONCEPT OF THIS ELECTRO-MECHANICAL WATCH FEATURES A MECHANICAL MOTION DETECTOR VISIBLE ON THE DIAL AT 4:30. WHEN THE “ÉLÉGANTE” IS MOTIONLESS, IT GOES IN STAND BY MODE AFTER 35 MINUTES TO SAVE ITS ENERGY AND THE HANDS STOP TURNING. DURING THE STANDBY MODE, THE MICROPROCESSOR CONTINUES TO KEEP TIME, WHILE THE MECHANICAL PARTS - GEARS, ROTORS AND HANDS - STOP MOVING. WHEN THE “ÉLÉGANTE” IS MOVED AGAIN, THE HANDS SETS THEMSELVES AUTOMATICALLY TO THE CURRENT TIME, TAKING THE SHORTEST PATH - EITHER CLOCKWISE OR COUNTER CLOCKWISE.
ALL THE MECHANICAL ELEMENTS OF THE “ÉLÉGANTE” MOVEMENT ARE MANUFACTURED BY F.P.JOURNE, BASED ON THE BRAND’S OWN CRITERIA OF EXCELLENCE IN STATE-OF-THE-ART HAUTE HOROLOGY. THE ELECTRONIC COMPONENTS ARE MADE IN SWITZERLAND ACCORDING TO EXCLUSIVE STANDARDS, WITH A MICROPROCESSOR SPECIFICALLY CREATED FOR THE WATCH.
THE LUMINESCENT DIAL OF THE “ÉLÉGANTE” IN THE TITANIUM VERSIONS RECALLS THE SHIMMERING SURFACE OF WHITE MOTHER-OF-PEARL. IT OFFERS MAXIMUM LEGIBILITY, BY DAY AND BY NIGHT. AT NIGHT THE HANDS COUNT OFF THE HOURS, AS IN A SHADOW THEATRE. AS A FINISHING TOUCH TO HIS FIRST LADIES COLLECTION, F.P.JOURNE HAS CHOSEN A FLAT TORTUE CASE, WHOSE DESIGN IS TRADEMARKED®.
AS FRANÇOIS-PAUL JOURNE SAYS: “I CREATED THIS WATCH BECAUSE FOR 20 YEARS, WOMEN HAVE BEEN ASKING ME TO DESIGN A WATCH FOR THEM; A WATCH THAT WAS DIFFERENT AND COMFORTABLE TO WEAR, AND THAT SUITED THEIR NEEDS AND DESIRES. I THEREFORE CREATED THIS LONG-LASTING WATCH ESPECIALLY FOR THEM. TODAY THE “ÉLÉGANTE” FEATURES THE ONLY ELECTRO-MECHANICAL MOVEMENT CONCEIVED AND CREATED FOR THE LUXURY MARKET AND OFFERING A TRUE VISION OF LUXURY.”
THE “ÉLÉGANTE” 40MM TITANIUM WITH CLOISONNÉ INSERTS AND 2 ROWS OF DIAMONDS IS AVAILABLE WITH ASSORTED COLOURED RUBBER STRAPS WHOSE ERGONOMIC SHAPE PERFECTLY EMBRACES THE WRIST.
Technical Specifications
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
-
About
THIS MODEL WAS PRODUCED BETWEEN 2014 AND 2022.
THE FIRST LADIES COLLECTION BY F.P.JOURNE
A REVOLUTIONARY HOROLOGICAL CONCEPT
ALWAYS AHEAD OF HIS TIME, CONCILIATING TRADITION, INNOVATION AND MODERN TECHNOLOGY, F.P.JOURNE HAS DEVELOPED A REVOLUTIONARY HOROLOGICAL CONCEPT FOR HIS FIRST LADIES COLLECTION. IT WAS DESIGNED AND CONCEIVED EXCLUSIVELY FOR WOMEN, WITH EXTREMELY PRECISE TECHNICAL SPECIFICATIONS TO PROVIDE THIS WATCH A LONG AUTONOMY OF 8 TO 10 YEARS IN DAILY USE AND UP TO 18 YEARS IN STANDBY MODE.
8 YEARS OF DEVELOPMENT WERE NECESSARY FOR THIS INNOVATIVE MOVEMENT THAT COMBINES A GREAT COMFORT OF USE AND THE PERFORMANCES OF AN ELECTRO-MECHANICAL WATCH WITH FEMINITY, ELEGANCE AND PRECISION. THE “ÉLÉGANTE” ALLOWS THE TIME TO BE STOPPED AND STARTED AGAIN. THIS IS THE DREAM OF ALL WATCHMAKERS…
THE CONCEPT OF THIS ELECTRO-MECHANICAL WATCH FEATURES A MECHANICAL MOTION DETECTOR VISIBLE ON THE DIAL AT 4:30. WHEN THE “ÉLÉGANTE” IS MOTIONLESS, IT GOES IN STAND BY MODE AFTER 35 MINUTES TO SAVE ITS ENERGY AND THE HANDS STOP TURNING. DURING THE STANDBY MODE, THE MICROPROCESSOR CONTINUES TO KEEP TIME, WHILE THE MECHANICAL PARTS - GEARS, ROTORS AND HANDS - STOP MOVING. WHEN THE “ÉLÉGANTE” IS MOVED AGAIN, THE HANDS SETS THEMSELVES AUTOMATICALLY TO THE CURRENT TIME, TAKING THE SHORTEST PATH - EITHER CLOCKWISE OR COUNTER CLOCKWISE.
ALL THE MECHANICAL ELEMENTS OF THE “ÉLÉGANTE” MOVEMENT ARE MANUFACTURED BY F.P.JOURNE, BASED ON THE BRAND’S OWN CRITERIA OF EXCELLENCE IN STATE-OF-THE-ART HAUTE HOROLOGY. THE ELECTRONIC COMPONENTS ARE MADE IN SWITZERLAND ACCORDING TO EXCLUSIVE STANDARDS, WITH A MICROPROCESSOR SPECIFICALLY CREATED FOR THE WATCH.
THE LUMINESCENT DIAL OF THE “ÉLÉGANTE” IN THE TITANIUM VERSIONS RECALLS THE SHIMMERING SURFACE OF WHITE MOTHER-OF-PEARL. IT OFFERS MAXIMUM LEGIBILITY, BY DAY AND BY NIGHT. AT NIGHT THE HANDS COUNT OFF THE HOURS, AS IN A SHADOW THEATRE. AS A FINISHING TOUCH TO HIS FIRST LADIES COLLECTION, F.P.JOURNE HAS CHOSEN A FLAT TORTUE CASE, WHOSE DESIGN IS TRADEMARKED®.
AS FRANÇOIS-PAUL JOURNE SAYS: “I CREATED THIS WATCH BECAUSE FOR 20 YEARS, WOMEN HAVE BEEN ASKING ME TO DESIGN A WATCH FOR THEM; A WATCH THAT WAS DIFFERENT AND COMFORTABLE TO WEAR, AND THAT SUITED THEIR NEEDS AND DESIRES. I THEREFORE CREATED THIS LONG-LASTING WATCH ESPECIALLY FOR THEM. TODAY THE “ÉLÉGANTE” FEATURES THE ONLY ELECTRO-MECHANICAL MOVEMENT CONCEIVED AND CREATED FOR THE LUXURY MARKET AND OFFERING A TRUE VISION OF LUXURY.”
THE “ÉLÉGANTE” 40MM TITANIUM WITH CLOISONNÉ INSERTS AND 2 ROWS OF DIAMONDS IS AVAILABLE WITH ASSORTED COLOURED RUBBER STRAPS WHOSE ERGONOMIC SHAPE PERFECTLY EMBRACES THE WRIST. -
Technical description
Technical Specifications
Movement :Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumptionFrequency :Quartz: 32'768 Hz.
Dimensions :- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Particularities :Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stemCharacteristics :Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)Autonomy :Daily use: 8 to 10 years
Standby: 18 yearsIndications :Central hours and minutes
Small second at 6h00Case :Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crownFinish :Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded endsDial :Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elementsNumber of pieces :Jewels: 18
Movement without dial: 132Movement :Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumptionFrequency :Quartz: 32'768 Hz.
Dimensions :- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Particularities :Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stemCharacteristics :Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)Autonomy :Daily use: 8 to 10 years
Standby: 18 yearsIndications :Central hours and minutes
Small second at 6h00Case :Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crownFinish :Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded endsDial :Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elementsNumber of pieces :Jewels: 18
Movement without dial: 132
At the heart of the movementAt the heart of the movementTechnical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Technical Specifications
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!