Calibre 1210 https://www.fpjourne.com/en/collection/elegante-collection/elegante-40-mm-titalytr-12-rows-diamonds-and-set-bracelet FP Journe https://www.fpjourne.com/en FP Journe
Dimensions: 40 x 35 mm
Overall height: 7.35 mm
Dial: black sapphire centre with outer dial screwed Steel elements
Hands: rhodium plated Steel
Titanium bracelet with Titalyt® treatment, set with 382 brilliant cut diamonds VS1 F/G ~3.23 carats and Black rubber
Folding clasp
Technical Specifications
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Dimensions: 40 x 35 mm
Overall height: 7.35 mm
Dial: black sapphire centre with outer dial screwed Steel elements
Hands: rhodium plated Steel
Titanium bracelet with Titalyt® treatment, set with 382 brilliant cut diamonds VS1 F/G ~3.23 carats and Grey rubber
Folding clasp
Technical Specifications
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Dimensions: 40 x 35 mm
Overall height: 7.35 mm
Dial: black sapphire centre with outer dial screwed Steel elements
Hands: rhodium plated Steel
Titanium bracelet with Titalyt® treatment, set with 382 brilliant cut diamonds VS1 F/G ~3.23 carats and White rubber
Folding clasp
Technical Specifications
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Dimensions: 40 x 35 mm
Overall height: 7.35 mm
Dial: black sapphire centre with outer dial screwed Steel elements
Hands: rhodium plated Steel
Titanium bracelet with Titalyt® treatment, set with 382 brilliant cut diamonds VS1 F/G ~3.23 carats and Powder Rose rubber
Folding clasp
Technical Specifications
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Dimensions: 40 x 35 mm
Overall height: 7.35 mm
Dial: black sapphire centre with outer dial screwed Steel elements
Hands: rhodium plated Steel
Titanium bracelet with Titalyt® treatment, set with 382 brilliant cut diamonds VS1 F/G ~3.23 carats and Midnight Blue rubber
Folding clasp
Technical Specifications
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Dimensions: 40 x 35 mm
Overall height: 7.35 mm
Dial: black sapphire centre with outer dial screwed Steel elements
Hands: rhodium plated Steel
Titanium bracelet with Titalyt® treatment, set with 382 brilliant cut diamonds VS1 F/G ~3.23 carats and Burgundy rubber
Folding clasp
Technical Specifications
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Dimensions: 40 x 35 mm
Overall height: 7.35 mm
Dial: black sapphire centre with outer dial screwed Steel elements
Hands: rhodium plated Steel
Titanium bracelet with Titalyt® treatment, set with 382 brilliant cut diamonds VS1 F/G ~3.23 carats and Orange rubber
Folding clasp
Technical Specifications
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Dimensions: 40 x 35 mm
Overall height: 7.35 mm
Dial: black sapphire centre with outer dial screwed Steel elements
Hands: rhodium plated Steel
Titanium bracelet with Titalyt® treatment, set with 382 brilliant cut diamonds VS1 F/G ~3.23 carats and Yellow rubber
Folding clasp
Technical Specifications
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Dimensions: 40 x 35 mm
Overall height: 7.35 mm
Dial: black sapphire centre with outer dial screwed Steel elements
Hands: rhodium plated Steel
Titanium bracelet with Titalyt® treatment, set with 382 brilliant cut diamonds VS1 F/G ~3.23 carats and Black rubber
Folding clasp
Dimensions: 40 x 35 mm
Overall height: 7.35 mm
Dial: black sapphire centre with outer dial screwed Steel elements
Hands: rhodium plated Steel
Titanium bracelet with Titalyt® treatment, set with 382 brilliant cut diamonds VS1 F/G ~3.23 carats and Black rubber
Folding clasp
Technical Specifications
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Dimensions: 40 x 35 mm
Overall height: 7.35 mm
Dial: black sapphire centre with outer dial screwed Steel elements
Hands: rhodium plated Steel
Titanium bracelet with Titalyt® treatment, set with 382 brilliant cut diamonds VS1 F/G ~3.23 carats and Grey rubber
Folding clasp
Technical Specifications
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Dimensions: 40 x 35 mm
Overall height: 7.35 mm
Dial: black sapphire centre with outer dial screwed Steel elements
Hands: rhodium plated Steel
Titanium bracelet with Titalyt® treatment, set with 382 brilliant cut diamonds VS1 F/G ~3.23 carats and White rubber
Folding clasp
Technical Specifications
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Dimensions: 40 x 35 mm
Overall height: 7.35 mm
Dial: black sapphire centre with outer dial screwed Steel elements
Hands: rhodium plated Steel
Titanium bracelet with Titalyt® treatment, set with 382 brilliant cut diamonds VS1 F/G ~3.23 carats and Powder Rose rubber
Folding clasp
Technical Specifications
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Dimensions: 40 x 35 mm
Overall height: 7.35 mm
Dial: black sapphire centre with outer dial screwed Steel elements
Hands: rhodium plated Steel
Titanium bracelet with Titalyt® treatment, set with 382 brilliant cut diamonds VS1 F/G ~3.23 carats and Midnight Blue rubber
Folding clasp
Technical Specifications
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Dimensions: 40 x 35 mm
Overall height: 7.35 mm
Dial: black sapphire centre with outer dial screwed Steel elements
Hands: rhodium plated Steel
Titanium bracelet with Titalyt® treatment, set with 382 brilliant cut diamonds VS1 F/G ~3.23 carats and Burgundy rubber
Folding clasp
Technical Specifications
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Dimensions: 40 x 35 mm
Overall height: 7.35 mm
Dial: black sapphire centre with outer dial screwed Steel elements
Hands: rhodium plated Steel
Titanium bracelet with Titalyt® treatment, set with 382 brilliant cut diamonds VS1 F/G ~3.23 carats and Orange rubber
Folding clasp
Technical Specifications
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Dimensions: 40 x 35 mm
Overall height: 7.35 mm
Dial: black sapphire centre with outer dial screwed Steel elements
Hands: rhodium plated Steel
Titanium bracelet with Titalyt® treatment, set with 382 brilliant cut diamonds VS1 F/G ~3.23 carats and Yellow rubber
Folding clasp
Technical Specifications
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Calibre 1210 https://www.fpjourne.com/en/collection/elegante-collection/elegante-40-mm-titalytr-12-rows-diamonds-and-set-bracelet FP Journe https://www.fpjourne.com/en FP Journe
About
THE ALLIANCE OF AN INNOVATIVE HOROLOGICAL CONCEPT AND JEWELLERY
F.P.Journe presents the élégante 12 rows of diamonds watch, on a 40 mm case, with new set bracelets. Designed for women, these new versions reflect the know-how of the Manufacture, which combines watchmaking innovation and jewellery refinement.
The 12 links, in Titanium or Titalyt®, are set with 382 brilliant cut diamonds for a total of 3.23 carats. Completed with an interchangeable rubber part, these new bracelets follow perfectly the wrist shape, offering comfort and lightness. To vary the styles to suit all desires, they are available in 8 colors - white, midnight blue, burgundy, gray, yellow, black, orange and powder rose - and can accompany all 40 mm élégante models.
Several elements make up the face of the watch: a sapphire dial, white for the Titanium version, black for the Titalyt® version, and screwed Steel appliques. As a finishing touch to this ladies collection, F.P.Journe has chosen a Flat Tortue® case, whose design is trademarked.
The élégante by F.P.Journe is an innovative horological concept that reconciles tradition and modern technology. 8 years of research were necessary to bring it to fruition. François-Paul Journe says: " I created this watch because for 20 years, women have been asking me to design a watch for them; a watch that was different and comfortable to wear, and that suited their needs and desires. I therefore created this long-lasting watch especially for them. The élégante features the only electro-mechanical movement designed with a true vision of luxury."
All the mechanical parts of the movement are produced in the F.P.Journe Manufacture according to its criteria of excellence. The electronic part is made in Switzerland, with a microprocessor specifically developed for this watch.
Fitted with a revolutionary electromechanical movement, the élégante by F.P.Journe provides more than 8 years autonomy with the performance of a watch that is exceptionally comfortable to wear. After remaining motionless for 35 minutes, the watch switches to standby mode in order to save energy, and its hands stop turning. In standby mode, the microprocessor specially created for this watch continues to measure the time. When the motion detector visible on the dial at 4h30 is activated, it automatically sets itself to the correct time, with the hands taking the shortest path, whether clockwise or counter-clockwise. The élégante by F.P.Journe allows time to be stopped and started again - the absolute dream of all watchmakers…
Technical Specifications
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
-
About
élégante by F.P.Journe 12 rows of diamonds with set bracelets
THE ALLIANCE OF AN INNOVATIVE HOROLOGICAL CONCEPT AND JEWELLERY
F.P.Journe presents the élégante 12 rows of diamonds watch, on a 40 mm case, with new set bracelets. Designed for women, these new versions reflect the know-how of the Manufacture, which combines watchmaking innovation and jewellery refinement.
The 12 links, in Titanium or Titalyt®, are set with 382 brilliant cut diamonds for a total of 3.23 carats. Completed with an interchangeable rubber part, these new bracelets follow perfectly the wrist shape, offering comfort and lightness. To vary the styles to suit all desires, they are available in 8 colors - white, midnight blue, burgundy, gray, yellow, black, orange and powder rose - and can accompany all 40 mm élégante models.
Several elements make up the face of the watch: a sapphire dial, white for the Titanium version, black for the Titalyt® version, and screwed Steel appliques. As a finishing touch to this ladies collection, F.P.Journe has chosen a Flat Tortue® case, whose design is trademarked.
The élégante by F.P.Journe is an innovative horological concept that reconciles tradition and modern technology. 8 years of research were necessary to bring it to fruition. François-Paul Journe says: " I created this watch because for 20 years, women have been asking me to design a watch for them; a watch that was different and comfortable to wear, and that suited their needs and desires. I therefore created this long-lasting watch especially for them. The élégante features the only electro-mechanical movement designed with a true vision of luxury."
All the mechanical parts of the movement are produced in the F.P.Journe Manufacture according to its criteria of excellence. The electronic part is made in Switzerland, with a microprocessor specifically developed for this watch.
Fitted with a revolutionary electromechanical movement, the élégante by F.P.Journe provides more than 8 years autonomy with the performance of a watch that is exceptionally comfortable to wear. After remaining motionless for 35 minutes, the watch switches to standby mode in order to save energy, and its hands stop turning. In standby mode, the microprocessor specially created for this watch continues to measure the time. When the motion detector visible on the dial at 4h30 is activated, it automatically sets itself to the correct time, with the hands taking the shortest path, whether clockwise or counter-clockwise. The élégante by F.P.Journe allows time to be stopped and started again - the absolute dream of all watchmakers…
-
Technical description
Technical Specifications
Movement :Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumptionFrequency :Quartz: 32'768 Hz.
Dimensions :- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Particularities :Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stemCharacteristics :Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)Autonomy :Daily use: 8 to 10 years
Standby: 18 yearsIndications :Central hours and minutes
Small second at 6h00Case :Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crownFinish :Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded endsDial :Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elementsNumber of pieces :Jewels: 18
Movement without dial: 132Movement :Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumptionFrequency :Quartz: 32'768 Hz.
Dimensions :- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Particularities :Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stemCharacteristics :Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)Autonomy :Daily use: 8 to 10 years
Standby: 18 yearsIndications :Central hours and minutes
Small second at 6h00Case :Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crownFinish :Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded endsDial :Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elementsNumber of pieces :Jewels: 18
Movement without dial: 132
At the heart of the movementAt the heart of the movement![fpjourne]()
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Technical Specifications
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Electromechanical
Patented two-rotor motor
Dedicated processor, specific functions and low consumption
Quartz: 32'768 Hz.
- Overall : 28.5 x 28.3 mm
- Casing-up : 27.9 x 27.7 mm
- Overall Height : 3.13 mm
- Height of winding stem : 1.10 mm
- Diameter of stem thread : S 0.90 mm
Standby after 35 minutes motionless
Restart and automatic time setting when the watch is put back on
Motion detector with inertia weight visible on the dial
2 position hand setting stem
Time adjustment in position 2 of the hand-setting stem
Stop second in time setting position (crown pulled)
Daily use: 8 to 10 years
Standby: 18 years
Central hours and minutes
Small second at 6h00
Titanium, Titalyt®, 18K 6N Gold or Platinum, depending on the watch model
Dimensions:
- Flat Tortue®: 40 x 35 mm
- Total thickness: 7.35 mm
or
- Flat Tortue®: 48 x 40 mm
- Total thickness: 7.95 mm
Sapphire crystal case back
Water resistant to 30 meters, screw-down crown
Golden movement 4N
Engraved and decorated battery bridge
Cotes de Genève
Screw heads polished and beveled
Pegs with polished rounded ends
Inner dial: white luminescent, black luminescent, white sapphire, black sapphire, set with diamonds or set with diamonds and precious stones, depending on the watch model
Outer dial with screwed Steel elements
Jewels: 18
Movement without dial: 132
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!
Technical description
This electromechanical watch is fitted with a mechanical motion detector visible on the dial at 4h30. After 35 minutes motionless, the watch switches to standby mode in order to save energy and its hands stop turning.
During the standby mode, the microprocessor continues to measure time, but the mechanical elements – gear train, rotors and hands, stop moving. As soon as it is worn again, it automatically sets itself to the correct time; the hands taking the shortest path, whether clockwise or counter-clockwise.
The élégante by F.P.Journe allows time to be stopped and started again, the absolute dream of all watchmakers. Magical!