THIS MODEL WAS PRODUCED BETWEEN 2008 AND 2013.

THE BOUTIQUE EDITION WITH BLACK DIAL ON 18K 6N GOLD CASE IS AVAILABLE ONLY IN THE F.P.JOURNE BOUTIQUES AND ESPACES AND FOR ALL F.P.JOURNE MODELS, APART FROM THE STRIKING WATCHES.

WORLD PREMIERE:
FIRST MECHANICAL MOVEMENT WITH AUTOMATIC WINDING AND A POWER RESERVE OF OVER 120 HOURS.

THE ROBUST, MULTI-PURPOSE OCTA IS F.P. JOURNE'S MOST HIGHLY EVOLVED CONSTRUCTION. WITH DIFFERENT COMPLICATED MECHANISMS BUILT INTO MOVEMENT, THE OCTA FIVE-DAY AUTOMATICS ALWAYS MEASURE 30 MM X 5.5 MM. IT'S RARE TO FIND A WATCHMAKER WITH A SPATIAL VISION TO IMAGINE A SINGLE COMPLEX CHASSIS THAT INTEGRATES VERY DIFFERENT MECHANISMS WITHOUT CHANGING ITS SIZE. IT IS ALSO THE FIRST AUTOMATIC MOVEMENT WITH A POWER RESERVE THAT MAINTAINS PRECISION TIMEKEEPING FOR FIVE DAYS (120 HOURS) OFF THE WRIST.

Calibre OCTA

A horological ideal

“The construction of the Octa calibre has less powerful ties with horological history than do the constant-force device or resonance models, but it symbolises an horological ideal of giving timekeepers the highest possible degree of precision and autonomy!

One can indeed note the fact that if church clocks are placed so high, in addition to enhancing visibility, it was mostly because it often took an entire month for the driving-weights to drop the length of their cords. Numerous systems were invented to increase the operating duration of timekeeping devices, meeting with various degrees of success. Given the small volume of a wristwatch, the size of the mainspring was automatically limited. Watchmakers therefore discovered the trick of adding an extra wheel to the customary geartrain in order to extend the duration of its development. Unfortunately, actually using this system, even with a stronger spring, led them to observe that the level of energy actually reaching the balance remained low. To compensate for this, they fitted a smaller balance using less energy, but which was also less stable. It is therefore not unusual to find that some watches able to run for several days display an extremely unpredictable level of precision.

This challenge was a powerful source of motivation! I then imagined that the best and the most obvious means of extending the running duration would be to extend the capacity of the spring development. The difficulty lay in integrating it on the same level as the gear-train and the escapement, given its stability: 1 metre and 1 millimetre thick. Thanks to the low torque of this spring, I could achieve extremely fast automatic winding (one and a half hours on a Chappuis cyclotest for over 5 days’ running).

Once the challenge of autonomy was thus successfully met with this automatic winding calibre, I knuckled down to the second challenge of managing to insert various complications into that same movement: power reserve with large date display, fly-back chronograph with large date display, retrograde annual calendar, etc… and of doing so while maintaining an identical size for all models in the Octa collection.

Three years of research and development were required before this automatic winding movement that is unique in the world could be presented to the public.”


François-Paul Journe