Calibre 1300.3 https://www.fpjourne.com/en/collection/boutique-collection/octa-automatique-reserve-nacre FP Journe https://www.fpjourne.com/en FP Journe
Blue Mother of Pearl dial
Technical Specifications
Centre hours and minutes
Small seconds at 4:30
Large date
Power-reserve indicator at 9h00
- Overall dimensions : 30.80 mm
- Casing-up diameter : 30.40 mm
- Overall height : 5.80 mm
- Height of winding system : 3.00 mm
- Diameter of stem thread : S0.90 mm
- Case diameter : 40.00 mm
- Overall thickness case : 10.6 mm
In-line lever escapement, 15 tooth wheel
Balance with 4 inertia spring
Flat Anachron microfamed spring
Free-sprung balance
Mobile stud holder
Nivatronic laser soldered balance spring
Pinned GE stud
Three-position crown Slipping mainspring
Off-centre winding rotor
On rotator: 274 anti clock-wise rotations per 24 hours
Uni-directional automatic winding
Date setting by turning crown in opposite ways (position 2)
Time setting with crown in position 3
21'600 Alt/h, 3 Hz
Inertia: 10.10 mgcm2
Angle of lift: 52°
12 h dial up : 280°
90 h dial up : 220°
160 ± 10 hours
37
Circular stripes on the bridges
Baseplate partly circular grained
Polished screw heads with chamfered slots
Pegs with polished rounded ends
Steelwork with polished chamfers and straight graining
Movement: 259
Cased up with strap: 293
Centre hours and minutes
Small seconds at 4:30
Large date
Power-reserve indicator at 9h00
- Overall dimensions : 30.80 mm
- Casing-up diameter : 30.40 mm
- Overall height : 5.80 mm
- Height of winding system : 3.00 mm
- Diameter of stem thread : S0.90 mm
- Case diameter : 40.00 mm
- Overall thickness case : 10.6 mm
In-line lever escapement, 15 tooth wheel
Balance with 4 inertia spring
Flat Anachron microfamed spring
Free-sprung balance
Mobile stud holder
Nivatronic laser soldered balance spring
Pinned GE stud
Three-position crown Slipping mainspring
Off-centre winding rotor
On rotator: 274 anti clock-wise rotations per 24 hours
Uni-directional automatic winding
Date setting by turning crown in opposite ways (position 2)
Time setting with crown in position 3
21'600 Alt/h, 3 Hz
Inertia: 10.10 mgcm2
Angle of lift: 52°
12 h dial up : 280°
90 h dial up : 220°
160 ± 10 hours
37
Circular stripes on the bridges
Baseplate partly circular grained
Polished screw heads with chamfered slots
Pegs with polished rounded ends
Steelwork with polished chamfers and straight graining
Movement: 259
Cased up with strap: 293
Technical description
(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance
Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.
Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
Technical description
(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance
Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.
Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
Pink Mother of Pearl dial
Technical Specifications
Centre hours and minutes
Small seconds at 4:30
Large date
Power-reserve indicator at 9h00
- Overall dimensions : 30.80 mm
- Casing-up diameter : 30.40 mm
- Overall height : 5.80 mm
- Height of winding system : 3.00 mm
- Diameter of stem thread : S0.90 mm
- Case diameter : 40.00 mm
- Overall thickness case : 10.6 mm
In-line lever escapement, 15 tooth wheel
Balance with 4 inertia spring
Flat Anachron microfamed spring
Free-sprung balance
Mobile stud holder
Nivatronic laser soldered balance spring
Pinned GE stud
Three-position crown Slipping mainspring
Off-centre winding rotor
On rotator: 274 anti clock-wise rotations per 24 hours
Uni-directional automatic winding
Date setting by turning crown in opposite ways (position 2)
Time setting with crown in position 3
21'600 Alt/h, 3 Hz
Inertia: 10.10 mgcm2
Angle of lift: 52°
12 h dial up : 280°
90 h dial up : 220°
160 ± 10 hours
37
Circular stripes on the bridges
Baseplate partly circular grained
Polished screw heads with chamfered slots
Pegs with polished rounded ends
Steelwork with polished chamfers and straight graining
Movement: 259
Cased up with strap: 293
Centre hours and minutes
Small seconds at 4:30
Large date
Power-reserve indicator at 9h00
- Overall dimensions : 30.80 mm
- Casing-up diameter : 30.40 mm
- Overall height : 5.80 mm
- Height of winding system : 3.00 mm
- Diameter of stem thread : S0.90 mm
- Case diameter : 40.00 mm
- Overall thickness case : 10.6 mm
In-line lever escapement, 15 tooth wheel
Balance with 4 inertia spring
Flat Anachron microfamed spring
Free-sprung balance
Mobile stud holder
Nivatronic laser soldered balance spring
Pinned GE stud
Three-position crown Slipping mainspring
Off-centre winding rotor
On rotator: 274 anti clock-wise rotations per 24 hours
Uni-directional automatic winding
Date setting by turning crown in opposite ways (position 2)
Time setting with crown in position 3
21'600 Alt/h, 3 Hz
Inertia: 10.10 mgcm2
Angle of lift: 52°
12 h dial up : 280°
90 h dial up : 220°
160 ± 10 hours
37
Circular stripes on the bridges
Baseplate partly circular grained
Polished screw heads with chamfered slots
Pegs with polished rounded ends
Steelwork with polished chamfers and straight graining
Movement: 259
Cased up with strap: 293
Technical description
(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance
Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.
Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
Technical description
(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance
Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.
Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
Blue Mother of Pearl dial
Blue Mother of Pearl dial
Technical Specifications
Centre hours and minutes
Small seconds at 4:30
Large date
Power-reserve indicator at 9h00
- Overall dimensions : 30.80 mm
- Casing-up diameter : 30.40 mm
- Overall height : 5.80 mm
- Height of winding system : 3.00 mm
- Diameter of stem thread : S0.90 mm
- Case diameter : 40.00 mm
- Overall thickness case : 10.6 mm
In-line lever escapement, 15 tooth wheel
Balance with 4 inertia spring
Flat Anachron microfamed spring
Free-sprung balance
Mobile stud holder
Nivatronic laser soldered balance spring
Pinned GE stud
Three-position crown Slipping mainspring
Off-centre winding rotor
On rotator: 274 anti clock-wise rotations per 24 hours
Uni-directional automatic winding
Date setting by turning crown in opposite ways (position 2)
Time setting with crown in position 3
21'600 Alt/h, 3 Hz
Inertia: 10.10 mgcm2
Angle of lift: 52°
12 h dial up : 280°
90 h dial up : 220°
160 ± 10 hours
37
Circular stripes on the bridges
Baseplate partly circular grained
Polished screw heads with chamfered slots
Pegs with polished rounded ends
Steelwork with polished chamfers and straight graining
Movement: 259
Cased up with strap: 293
Centre hours and minutes
Small seconds at 4:30
Large date
Power-reserve indicator at 9h00
- Overall dimensions : 30.80 mm
- Casing-up diameter : 30.40 mm
- Overall height : 5.80 mm
- Height of winding system : 3.00 mm
- Diameter of stem thread : S0.90 mm
- Case diameter : 40.00 mm
- Overall thickness case : 10.6 mm
In-line lever escapement, 15 tooth wheel
Balance with 4 inertia spring
Flat Anachron microfamed spring
Free-sprung balance
Mobile stud holder
Nivatronic laser soldered balance spring
Pinned GE stud
Three-position crown Slipping mainspring
Off-centre winding rotor
On rotator: 274 anti clock-wise rotations per 24 hours
Uni-directional automatic winding
Date setting by turning crown in opposite ways (position 2)
Time setting with crown in position 3
21'600 Alt/h, 3 Hz
Inertia: 10.10 mgcm2
Angle of lift: 52°
12 h dial up : 280°
90 h dial up : 220°
160 ± 10 hours
37
Circular stripes on the bridges
Baseplate partly circular grained
Polished screw heads with chamfered slots
Pegs with polished rounded ends
Steelwork with polished chamfers and straight graining
Movement: 259
Cased up with strap: 293
Technical description
(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance
Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.
Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
Technical description
(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance
Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.
Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
Pink Mother of Pearl dial
Technical Specifications
Centre hours and minutes
Small seconds at 4:30
Large date
Power-reserve indicator at 9h00
- Overall dimensions : 30.80 mm
- Casing-up diameter : 30.40 mm
- Overall height : 5.80 mm
- Height of winding system : 3.00 mm
- Diameter of stem thread : S0.90 mm
- Case diameter : 40.00 mm
- Overall thickness case : 10.6 mm
In-line lever escapement, 15 tooth wheel
Balance with 4 inertia spring
Flat Anachron microfamed spring
Free-sprung balance
Mobile stud holder
Nivatronic laser soldered balance spring
Pinned GE stud
Three-position crown Slipping mainspring
Off-centre winding rotor
On rotator: 274 anti clock-wise rotations per 24 hours
Uni-directional automatic winding
Date setting by turning crown in opposite ways (position 2)
Time setting with crown in position 3
21'600 Alt/h, 3 Hz
Inertia: 10.10 mgcm2
Angle of lift: 52°
12 h dial up : 280°
90 h dial up : 220°
160 ± 10 hours
37
Circular stripes on the bridges
Baseplate partly circular grained
Polished screw heads with chamfered slots
Pegs with polished rounded ends
Steelwork with polished chamfers and straight graining
Movement: 259
Cased up with strap: 293
Centre hours and minutes
Small seconds at 4:30
Large date
Power-reserve indicator at 9h00
- Overall dimensions : 30.80 mm
- Casing-up diameter : 30.40 mm
- Overall height : 5.80 mm
- Height of winding system : 3.00 mm
- Diameter of stem thread : S0.90 mm
- Case diameter : 40.00 mm
- Overall thickness case : 10.6 mm
In-line lever escapement, 15 tooth wheel
Balance with 4 inertia spring
Flat Anachron microfamed spring
Free-sprung balance
Mobile stud holder
Nivatronic laser soldered balance spring
Pinned GE stud
Three-position crown Slipping mainspring
Off-centre winding rotor
On rotator: 274 anti clock-wise rotations per 24 hours
Uni-directional automatic winding
Date setting by turning crown in opposite ways (position 2)
Time setting with crown in position 3
21'600 Alt/h, 3 Hz
Inertia: 10.10 mgcm2
Angle of lift: 52°
12 h dial up : 280°
90 h dial up : 220°
160 ± 10 hours
37
Circular stripes on the bridges
Baseplate partly circular grained
Polished screw heads with chamfered slots
Pegs with polished rounded ends
Steelwork with polished chamfers and straight graining
Movement: 259
Cased up with strap: 293
Technical description
(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance
Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.
Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
Technical description
(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance
Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.
Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
About
THE BOUTIQUE NACRE COLLECTION ELEGANTLY COMBINES THE MYSTERIES OF MOTHER OF PEARL IN AN HOUR CIRCLE ADORNED WITH ARABIC NUMERALS, WITH THE TIMELESS ELEGANCE OF A GUILLOCHE CLOUS DE PARIS IN ITS CENTRE.
A HOROLOGICAL IDEAL
“THE CONSTRUCTION OF THE OCTA CALIBRE HAS LESS POWERFUL TIES WITH HOROLOGICAL HISTORY THAN DO THE CONSTANT-FORCE DEVICE OR RESONANCE MODELS, BUT IT SYMBOLISES AN HOROLOGICAL IDEAL OF GIVING TIMEKEEPERS THE HIGHEST POSSIBLE DEGREE OF PRECISION AND AUTONOMY!
ONE CAN INDEED NOTE THE FACT THAT IF CHURCH CLOCKS ARE PLACED SO HIGH, IN ADDITION TO ENHANCING VISIBILITY, IT WAS MOSTLY BECAUSE IT OFTEN TOOK AN ENTIRE MONTH FOR THE DRIVING-WEIGHTS TO DROP THE LENGTH OF THEIR CORDS. NUMEROUS SYSTEMS WERE INVENTED TO INCREASE THE OPERATING DURATION OF TIMEKEEPING DEVICES, MEETING WITH VARIOUS DEGREES OF SUCCESS. GIVEN THE SMALL VOLUME OF A WRISTWATCH, THE SIZE OF THE MAINSPRING WAS AUTOMATICALLY LIMITED. WATCHMAKERS THEREFORE DISCOVERED THE TRICK OF ADDING AN EXTRA WHEEL TO THE CUSTOMARY GEARTRAIN IN ORDER TO EXTEND THE DURATION OF ITS DEVELOPMENT. UNFORTUNATELY, ACTUALLY USING THIS SYSTEM, EVEN WITH A STRONGER SPRING, LED THEM TO OBSERVE THAT THE LEVEL OF ENERGY ACTUALLY REACHING THE BALANCE REMAINED LOW. TO COMPENSATE FOR THIS, THEY FITTED A SMALLER BALANCE USING LESS ENERGY, BUT WHICH WAS ALSO LESS STABLE. IT IS THEREFORE NOT UNUSUAL TO FIND THAT SOME WATCHES ABLE TO RUN FOR SEVERAL DAYS DISPLAY AN EXTREMELY UNPREDICTABLE LEVEL OF PRECISION.
THIS CHALLENGE WAS A POWERFUL SOURCE OF MOTIVATION! I THEN IMAGINED THAT THE BEST AND THE MOST OBVIOUS MEANS OF EXTENDING THE RUNNING DURATION WOULD BE TO EXTEND THE CAPACITY OF THE SPRING DEVELOPMENT. THE DIFFICULTY LAY IN INTEGRATING IT ON THE SAME LEVEL AS THE GEAR-TRAIN AND THE ESCAPEMENT, GIVEN ITS STABILITY: 1 METRE AND 1 MILLIMETRE THICK. THANKS TO THE LOW TORQUE OF THIS SPRING, I COULD ACHIEVE EXTREMELY FAST AUTOMATIC WINDING (ONE AND A HALF HOURS ON A CHAPPUIS CYCLOTEST FOR OVER 5 DAYS’ RUNNING).
ONCE THE CHALLENGE OF AUTONOMY WAS THUS SUCCESSFULLY MET WITH THIS AUTOMATIC WINDING CALIBRE, I KNUCKLED DOWN TO THE SECOND CHALLENGE OF MANAGING TO INSERT VARIOUS COMPLICATIONS INTO THAT SAME MOVEMENT: POWER RESERVE WITH LARGE DATE DISPLAY, FLY-BACK CHRONOGRAPH WITH LARGE DATE DISPLAY, RETROGRADE ANNUAL CALENDAR, ETC… AND OF DOING SO WHILE MAINTAINING AN IDENTICAL SIZE FOR ALL MODELS.
THREE YEARS OF RESEARCH AND DEVELOPMENT WERE REQUIRED BEFORE THIS AUTOMATIC WINDING MOVEMENT THAT IS UNIQUE IN THE WORLD COULD BE PRESENTED TO THE PUBLIC.”
FRANÇOIS-PAUL JOURNE
Technical Specifications
Centre hours and minutes
Small seconds at 4:30
Large date
Power-reserve indicator at 9h00
- Overall dimensions : 30.80 mm
- Casing-up diameter : 30.40 mm
- Overall height : 5.80 mm
- Height of winding system : 3.00 mm
- Diameter of stem thread : S0.90 mm
- Case diameter : 40.00 mm
- Overall thickness case : 10.6 mm
In-line lever escapement, 15 tooth wheel
Balance with 4 inertia spring
Flat Anachron microfamed spring
Free-sprung balance
Mobile stud holder
Nivatronic laser soldered balance spring
Pinned GE stud
Three-position crown Slipping mainspring
Off-centre winding rotor
On rotator: 274 anti clock-wise rotations per 24 hours
Uni-directional automatic winding
Date setting by turning crown in opposite ways (position 2)
Time setting with crown in position 3
21'600 Alt/h, 3 Hz
Inertia: 10.10 mgcm2
Angle of lift: 52°
12 h dial up : 280°
90 h dial up : 220°
160 ± 10 hours
37
Circular stripes on the bridges
Baseplate partly circular grained
Polished screw heads with chamfered slots
Pegs with polished rounded ends
Steelwork with polished chamfers and straight graining
Movement: 259
Cased up with strap: 293
Centre hours and minutes
Small seconds at 4:30
Large date
Power-reserve indicator at 9h00
- Overall dimensions : 30.80 mm
- Casing-up diameter : 30.40 mm
- Overall height : 5.80 mm
- Height of winding system : 3.00 mm
- Diameter of stem thread : S0.90 mm
- Case diameter : 40.00 mm
- Overall thickness case : 10.6 mm
In-line lever escapement, 15 tooth wheel
Balance with 4 inertia spring
Flat Anachron microfamed spring
Free-sprung balance
Mobile stud holder
Nivatronic laser soldered balance spring
Pinned GE stud
Three-position crown Slipping mainspring
Off-centre winding rotor
On rotator: 274 anti clock-wise rotations per 24 hours
Uni-directional automatic winding
Date setting by turning crown in opposite ways (position 2)
Time setting with crown in position 3
21'600 Alt/h, 3 Hz
Inertia: 10.10 mgcm2
Angle of lift: 52°
12 h dial up : 280°
90 h dial up : 220°
160 ± 10 hours
37
Circular stripes on the bridges
Baseplate partly circular grained
Polished screw heads with chamfered slots
Pegs with polished rounded ends
Steelwork with polished chamfers and straight graining
Movement: 259
Cased up with strap: 293
Technical description
(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance
Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.
Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
Technical description
(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance
Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.
Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
-
About
THIS MODEL WAS PRODUCED BETWEEN 2009 AND 2016.
THE BOUTIQUE NACRE COLLECTION ELEGANTLY COMBINES THE MYSTERIES OF MOTHER OF PEARL IN AN HOUR CIRCLE ADORNED WITH ARABIC NUMERALS, WITH THE TIMELESS ELEGANCE OF A GUILLOCHE CLOUS DE PARIS IN ITS CENTRE.
-
Testimony
CALIBRE OCTA
A HOROLOGICAL IDEAL
“THE CONSTRUCTION OF THE OCTA CALIBRE HAS LESS POWERFUL TIES WITH HOROLOGICAL HISTORY THAN DO THE CONSTANT-FORCE DEVICE OR RESONANCE MODELS, BUT IT SYMBOLISES AN HOROLOGICAL IDEAL OF GIVING TIMEKEEPERS THE HIGHEST POSSIBLE DEGREE OF PRECISION AND AUTONOMY!
ONE CAN INDEED NOTE THE FACT THAT IF CHURCH CLOCKS ARE PLACED SO HIGH, IN ADDITION TO ENHANCING VISIBILITY, IT WAS MOSTLY BECAUSE IT OFTEN TOOK AN ENTIRE MONTH FOR THE DRIVING-WEIGHTS TO DROP THE LENGTH OF THEIR CORDS. NUMEROUS SYSTEMS WERE INVENTED TO INCREASE THE OPERATING DURATION OF TIMEKEEPING DEVICES, MEETING WITH VARIOUS DEGREES OF SUCCESS. GIVEN THE SMALL VOLUME OF A WRISTWATCH, THE SIZE OF THE MAINSPRING WAS AUTOMATICALLY LIMITED. WATCHMAKERS THEREFORE DISCOVERED THE TRICK OF ADDING AN EXTRA WHEEL TO THE CUSTOMARY GEARTRAIN IN ORDER TO EXTEND THE DURATION OF ITS DEVELOPMENT. UNFORTUNATELY, ACTUALLY USING THIS SYSTEM, EVEN WITH A STRONGER SPRING, LED THEM TO OBSERVE THAT THE LEVEL OF ENERGY ACTUALLY REACHING THE BALANCE REMAINED LOW. TO COMPENSATE FOR THIS, THEY FITTED A SMALLER BALANCE USING LESS ENERGY, BUT WHICH WAS ALSO LESS STABLE. IT IS THEREFORE NOT UNUSUAL TO FIND THAT SOME WATCHES ABLE TO RUN FOR SEVERAL DAYS DISPLAY AN EXTREMELY UNPREDICTABLE LEVEL OF PRECISION.
THIS CHALLENGE WAS A POWERFUL SOURCE OF MOTIVATION! I THEN IMAGINED THAT THE BEST AND THE MOST OBVIOUS MEANS OF EXTENDING THE RUNNING DURATION WOULD BE TO EXTEND THE CAPACITY OF THE SPRING DEVELOPMENT. THE DIFFICULTY LAY IN INTEGRATING IT ON THE SAME LEVEL AS THE GEAR-TRAIN AND THE ESCAPEMENT, GIVEN ITS STABILITY: 1 METRE AND 1 MILLIMETRE THICK. THANKS TO THE LOW TORQUE OF THIS SPRING, I COULD ACHIEVE EXTREMELY FAST AUTOMATIC WINDING (ONE AND A HALF HOURS ON A CHAPPUIS CYCLOTEST FOR OVER 5 DAYS’ RUNNING).
ONCE THE CHALLENGE OF AUTONOMY WAS THUS SUCCESSFULLY MET WITH THIS AUTOMATIC WINDING CALIBRE, I KNUCKLED DOWN TO THE SECOND CHALLENGE OF MANAGING TO INSERT VARIOUS COMPLICATIONS INTO THAT SAME MOVEMENT: POWER RESERVE WITH LARGE DATE DISPLAY, FLY-BACK CHRONOGRAPH WITH LARGE DATE DISPLAY, RETROGRADE ANNUAL CALENDAR, ETC… AND OF DOING SO WHILE MAINTAINING AN IDENTICAL SIZE FOR ALL MODELS.
THREE YEARS OF RESEARCH AND DEVELOPMENT WERE REQUIRED BEFORE THIS AUTOMATIC WINDING MOVEMENT THAT IS UNIQUE IN THE WORLD COULD BE PRESENTED TO THE PUBLIC.”
FRANÇOIS-PAUL JOURNE -
Technical description
Technical Specifications
Indications :Centre hours and minutes
Small seconds at 4:30
Large date
Power-reserve indicator at 9h00Dimensions :- Overall dimensions : 30.80 mm
- Casing-up diameter : 30.40 mm
- Overall height : 5.80 mm
- Height of winding system : 3.00 mm
- Diameter of stem thread : S0.90 mm
- Case diameter : 40.00 mm
- Overall thickness case : 10.6 mm
Characteristics :In-line lever escapement, 15 tooth wheel
Balance with 4 inertia spring
Flat Anachron microfamed spring
Free-sprung balance
Mobile stud holder
Nivatronic laser soldered balance spring
Pinned GE stud
Three-position crown Slipping mainspring
Off-centre winding rotorWINDING SPEED :On rotator: 274 anti clock-wise rotations per 24 hours
Features :Uni-directional automatic winding
Date setting by turning crown in opposite ways (position 2)
Time setting with crown in position 3FREQUENCY :21'600 Alt/h, 3 Hz
Balance :Inertia: 10.10 mgcm2
Angle of lift: 52°AMPLITUDE :12 h dial up : 280°
90 h dial up : 220°Power Reserve :160 ± 10 hours
Number of Jewels :37
Finish :Circular stripes on the bridges
Baseplate partly circular grained
Polished screw heads with chamfered slots
Pegs with polished rounded ends
Steelwork with polished chamfers and straight grainingNumber of Parts :Movement: 259
Cased up with strap: 293Indications :Centre hours and minutes
Small seconds at 4:30
Large date
Power-reserve indicator at 9h00Dimensions :- Overall dimensions : 30.80 mm
- Casing-up diameter : 30.40 mm
- Overall height : 5.80 mm
- Height of winding system : 3.00 mm
- Diameter of stem thread : S0.90 mm
- Case diameter : 40.00 mm
- Overall thickness case : 10.6 mm
Characteristics :In-line lever escapement, 15 tooth wheel
Balance with 4 inertia spring
Flat Anachron microfamed spring
Free-sprung balance
Mobile stud holder
Nivatronic laser soldered balance spring
Pinned GE stud
Three-position crown Slipping mainspring
Off-centre winding rotorWINDING SPEED :On rotator: 274 anti clock-wise rotations per 24 hours
Features :Uni-directional automatic winding
Date setting by turning crown in opposite ways (position 2)
Time setting with crown in position 3FREQUENCY :21'600 Alt/h, 3 Hz
Balance :Inertia: 10.10 mgcm2
Angle of lift: 52°AMPLITUDE :12 h dial up : 280°
90 h dial up : 220°Power Reserve :160 ± 10 hours
Number of Jewels :37
Finish :Circular stripes on the bridges
Baseplate partly circular grained
Polished screw heads with chamfered slots
Pegs with polished rounded ends
Steelwork with polished chamfers and straight grainingNumber of Parts :Movement: 259
Cased up with strap: 293
At the heart of the movementAt the heart of the movementBrevet - EP 1 760 544 A1Technical description
(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance
Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.
Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.Brevet - EP 1 760 544 A1Technical description
(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance
Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.
Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
Technical Specifications
Centre hours and minutes
Small seconds at 4:30
Large date
Power-reserve indicator at 9h00
- Overall dimensions : 30.80 mm
- Casing-up diameter : 30.40 mm
- Overall height : 5.80 mm
- Height of winding system : 3.00 mm
- Diameter of stem thread : S0.90 mm
- Case diameter : 40.00 mm
- Overall thickness case : 10.6 mm
In-line lever escapement, 15 tooth wheel
Balance with 4 inertia spring
Flat Anachron microfamed spring
Free-sprung balance
Mobile stud holder
Nivatronic laser soldered balance spring
Pinned GE stud
Three-position crown Slipping mainspring
Off-centre winding rotor
On rotator: 274 anti clock-wise rotations per 24 hours
Uni-directional automatic winding
Date setting by turning crown in opposite ways (position 2)
Time setting with crown in position 3
21'600 Alt/h, 3 Hz
Inertia: 10.10 mgcm2
Angle of lift: 52°
12 h dial up : 280°
90 h dial up : 220°
160 ± 10 hours
37
Circular stripes on the bridges
Baseplate partly circular grained
Polished screw heads with chamfered slots
Pegs with polished rounded ends
Steelwork with polished chamfers and straight graining
Movement: 259
Cased up with strap: 293
Centre hours and minutes
Small seconds at 4:30
Large date
Power-reserve indicator at 9h00
- Overall dimensions : 30.80 mm
- Casing-up diameter : 30.40 mm
- Overall height : 5.80 mm
- Height of winding system : 3.00 mm
- Diameter of stem thread : S0.90 mm
- Case diameter : 40.00 mm
- Overall thickness case : 10.6 mm
In-line lever escapement, 15 tooth wheel
Balance with 4 inertia spring
Flat Anachron microfamed spring
Free-sprung balance
Mobile stud holder
Nivatronic laser soldered balance spring
Pinned GE stud
Three-position crown Slipping mainspring
Off-centre winding rotor
On rotator: 274 anti clock-wise rotations per 24 hours
Uni-directional automatic winding
Date setting by turning crown in opposite ways (position 2)
Time setting with crown in position 3
21'600 Alt/h, 3 Hz
Inertia: 10.10 mgcm2
Angle of lift: 52°
12 h dial up : 280°
90 h dial up : 220°
160 ± 10 hours
37
Circular stripes on the bridges
Baseplate partly circular grained
Polished screw heads with chamfered slots
Pegs with polished rounded ends
Steelwork with polished chamfers and straight graining
Movement: 259
Cased up with strap: 293
Technical description
(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance
Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.
Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.
Technical description
(1) 22K Gold rotor with uni-directional winding
(2) Large capacity mainspring barrel
(3) Precision-adjustment weights
(4) Full-size free-sprung chronometer balance
Watches with long power reserves have hitherto been handicapped by small balances which are susceptible to shocks and disturbances. The Octa's compact construction allows a large (10.1 mm) balance to be fitted, giving greater inertia and stability. The free-sprung chronometer balance is adjusted by five turning weights that vibrate at a steady 21'600 times an hour.
Fully wound, the Octa delivers chronometric precision for 120 hours. The meter-long mainspring supplies an average 850gr of torque, limiting the loss in balance amplitude to 25% over the five-day period. Beyond that time, the watch will continue to go for another day or two, but the amplitude-loss no longer guarantees precision timekeeping.